Design of high-repetition frequency gating circuit for cathode of image intensifier北大核心CSCD

According to the requirements of high repetition frequency, fast edge speed and small pulse width for cathode gating signal by range-gated technology, a cathode high repetition frequency gating circuit using period and multi-stage acceleration was proposed. By combining the RC circuit and the high-speed gate circuit, the time bias circuit unit was cascaded to generate logic pulses with different time sequences, which could respectively control the intermediate stage drive MOSFET to generate three phased drive signals, and the output of the intermediate stage drive was used as input of the output-stage MOSFET to control the acceleration and retention of its on-off process. It was verified by software simulation and board-level test. The test results show that the proposed gating circuit can increase the edge time of output pulse from μs level to 2 ns, and can provide +50 V/−200 V cathode off/on voltage, so as to achieve a repetition frequency ranging from 0~350 kHZ, a duty ratio of 0~100%, a minimum pulse width of 3.7 ns, and a pulse output delay time jitter of about 0.1 ns. It has important guiding significance for improving the minimum pulse width performance of high-speed and high-voltage gating power, the highest working repetition frequency and reducing the power loss of the device. © 2022 Editorial office of Journal of Applied Optics. All rights reserved.     

激光沉积修复TA15合金的组织和力学性能

采用激光沉积修复方法对TA15槽损伤试样进行了修复试验,考察了修复试样的组织和力学特点,发现激光修复试样组织是由基材的双态组织经由热影响区过渡到修复区的网篮组织。修复区组织为粗大的原始柱状β晶,晶粒内为α/β网篮组织,晶内α片层取向随机,宽0.4～0.5μm。分析了修复区和坡面存在熔合不良缺陷的原因,并给出了纠正措施。修复试样的室温静拉伸结果表明,试样的抗拉强度接近工业锻件水平,表明修复区与基材之间形成了致密冶金结合,但由于修复区粗大柱状晶组织,试样的冲击韧性比基材稍差。