Fabrication of Carbon Nanotube Thin Films for Flexible Transistors by Using a Cross-Linked Amine Polymer

Owing to their remarkable properties, single-walled carbon nanotube thin-film transistors (SWCNT-TFTs) are expected to be used in various flexible electronics applications. To fabricate SWCNT channel layers for TFTs, solution-based film formation on a self-assembled monolayer (SAM) covered with amino groups is commonly used. However, this method uses highly oxidized surfaces, which is not suitable for flexible polymeric substrates. In this work, a solution-based SWCNT film fabrication using methoxycarbonyl polyallylamine (Moc-PAA) is reported. The NH₂-terminated surface of the cross-linked Moc-PAA layer enables the formation of highly dense and uniform SWCNT networks on both rigid and flexible substrates. TFTs that use the fabricated SWCNT thin film exhibited excellent performance with small variations. The presented simple method to access SWCNT thin film accelerates the realization of flexible nanoelectronics.     

One-Step Synthesis of Cyclobutene-Annulated Fullerenes through a Cascade Reaction

The physicochemical properties of fullerene-based materials typically vary depending on the type and mode of addition of functional groups; therefore, developing fullerene derivatives with novel structures is imperative for further progress in materials science. In this study, we develop an efficient one-step strategy for synthesizing cyclobutene-annulated fullerene derivatives (cyclobutenofullerenes) and characterize their electronic properties. Despite the steric strain, cyclobutenofullerenes can be easily prepared via a one-step reaction of C₆₀ with a secondary propargylic phosphate. Structural analysis of the reaction intermediates suggests that the cascade reaction proceeds through a formal [2+2] cycloaddition of C₆₀ with an allene, caused by the 1,3-migration of the propargylic phosphate, followed by an additional 1,3-migration and the subsequent 1,2-elimination of the phosphodiester moiety.     

Synthesis,Properties, and π‐Dimer Formation of Oligothiophenes Partially Bearing Orthogonally Fused Fluorene Units

A series of oligothiophenes that incorporate cyclopenta[c]thiophene‐based units bearing spiro‐substituted dialkylfluorene was synthesized. Photophysical measurements indicated that there was no interruption in the conjugation along the oligothiophene backbones, irrespective of the number or position of this unit. Electrochemical measurements showed that the thiophene 7‐mers and 11‐mer exhibit reversible multi‐oxidation waves. The formation of cationic species was clearly observed from UV/Vis/NIR measurements. Furthermore, the UV/Vis/NIR spectra at 223 K under one‐electron oxidation conditions revealed that the unsubstituted thiophene or bithiophene units remained in the absence of intermolecular π–π interactions, whereas the formation of π‐dimeric species was observed for the thiophene 7‐mer containing an unsubstituted terthiophene ( U₃ ) unit. Theoretical calculations indicated that the combination of the U₃ unit and the all‐trans conformation decreased the intermolecular steric repulsion between the fused cyclopentene ring and its facing thiophene, which may contribute to the formation of the dimeric structure.     

Fe K‐Edge X‐ray Absorption Fine Structure Determination of γ‐Al2O3‐Supported Iron‐Oxide Species

The structure of FeO_x species supported on γ‐Al₂O₃ was investigated by using Fe K‐edge X‐ray absorption fine structure (XAFS) and X‐ray diffraction (XRD) measurements. The samples were prepared through the impregnation of iron nitrate on Al₂O₃ and co‐gelation of aluminum and iron sulfates. The dependence of the XRD patterns on Fe loading revealed the formation of α‐Fe₂O₃ particles at an Fe loading of above 10 wt %, whereas the formation of iron‐oxide crystals was not observed at Fe loadings of less than 9.0 wt %. The Fe K‐edge XAFS was characterized by a clear pre‐edge peak, which indicated that the Fe?O coordination structure deviates from central symmetry and that the degree of Fe?O?Fe bond formation is significantly lower than that in bulk samples at low Fe loading (<9.0 wt %). Fe K‐edge extended XAFS oscillations of the samples with low Fe loadings were explained by assuming an isolated iron‐oxide monomer on the γ‐Al₂O₃ surface.     

Micro‐ and Nano‐Technologies for Lipid Bilayer‐Based Ion‐Channel Functional Assays

Ion channel proteins provide gated pores that allow ions to passively flow across cell membranes. Owing to their crucial roles in regulating transmembrane ion flow, ion channel proteins have attracted the attention of pharmaceutical investigators as drug targets for use in the studies of both therapeutics and side effects. In this review, we discuss the current technologies that are used in the formation of ion channel‐integrated bilayer lipid membranes (BLMs) in microfabricated devices as a potential platform for next‐generation drug screening systems. Advances in BLM fabrication methodology have allowed the preparation of BLMs in sophisticated formats, such as microfluidic, automated, and/or array systems, which can be combined with channel current recordings. A much more critical step is the integration of the target channels into BLMs. Current technologies for the functional reconstitution of ion channel proteins are presented and discussed. Finally, the remaining issues of the BLM‐based methods for recording ion channel activities and their potential applications as drug screening systems are discussed.     

Asymmetric cross-benzoin condensation promoted by a chiral triazolium precatalyst bearing a pyridine moiety

Cross-benzoin condensation catalyzed by NHC, prepared from chiral triazolium salts bearing a pyridine ring, afforded α-hydroxy ketones with reasonable chemical yields and enantioselectivities. A wide range of aliphatic and aromatic aldehydes were successfully used in the reaction.     

A tensor product of the Steinberg module and a certain simple kG(pr)-module

Let G be a connected, semisimple, and simply connected algebraic group defined and split over the finite field of order p, and let G(q) be the corresponding finite Chevalley or twisted group, where q = p^r. Recently, Anwar determines the direct sum decomposition of the tensor product of the rth Steinberg module and a simple G-module with a (p,r)-minuscule highest weight λ. In this paper, we determine that of the tensor product regarded as a module for G(q) under some weak assumptions for λ.     

Structural and Electronic Influences on Rates of Tertpyridine−Amine CoIII−H Formation During Catalytic H2 Evolution in an Aqueous Environment

In this work, the differences in catalytic performance for a series of Co hydrogen evolution catalysts with different pentadentate polypyridyl ligands (L), have been rationalized by examining elementary steps of the catalytic cycle using a combination of electrochemical and transient pulse radiolysis (PR) studies in aqueous solution. Solvolysis of the [Co^II−Cl]⁺ species results in the formation of [Co^II(κ⁴-L)(OH₂)]²⁺. Further reduction produces [Co^I(κ⁴-L)(OH₂)]⁺, which undergoes a rate-limiting structural rearrangement to [Co^I(κ⁵-L)]⁺ before being protonated to form [Co^III−H]²⁺. The rate of [Co^III−H]²⁺ formation is similar for all complexes in the series. Using E_1/2 values of various Co species and pK_a values of [Co^III−H]²⁺ estimated from PR experiments, we found that while the protonation of [Co^III−H]²⁺ is unfavorable, [Co^II−H]⁺ reacts with protons to produce H₂. The catalytic activity for H₂ evolution tracks the hydricity of the [Co^II−H]⁺ intermediate.     

Garcinielliptone G from Garcinia subelliptica Induces Apoptosis in Acute Leukemia Cells

Cytotoxicity and apoptosis-inducing properties of compounds isolated from Garcinia subelliptica leaves were investigated. The hexane-soluble portion of MeOH extracts of G. subelliptica leaves that showed cytotoxic activity was separated to yield seven compounds 1–7. Chemical structure analysis using NMR spectroscopy and mass spectrometry confirmed that compound 1 was canophyllol, and compounds 2–7 were garcinielliptones N, O, J, G, F, and garcinielliptin oxide, respectively. Among them, garcinielliptone G (5) showed growth inhibition by causing apoptosis in THP-1 and Jurkat cells derived from human acute monocytic leukemia and T lymphocyte cells, respectively. Apoptosis induced by garcinielliptone G (5) was demonstrated by the detection of early apoptotic cells with fluorescein-labeled Annexin V and increases in cleaved caspase-3 and cleaved PARP protein levels. However, the addition of caspase inhibitor Z-VAD-FMK did not affect growth arrest or apoptosis induction. These results suggest that garcinielliptone G (5) can induce both caspase-3 activation and caspase-independent apoptosis. Therefore, garcinielliptone G (5) may be a potential candidate for acute leukemia treatment.