Crystal structure and computational studies of (E)-1-(benzo[b]thiophen-3-yl)-N-(4-ethoxyphenyl)methanimine

Crystallography Reports - The title compound, C17H15NOS, crystallizes in the orthorhombic sp. gr. Pca21. Two molecules in the asymmetric unit have similar structure. Crystal structure contains weak...     

A unified model for electrostatic sensors in fluid media

Nonlinear Dynamics - We present a unified model of electrostatic sensors comprising cantilever microbeam resonators in fluid media. The model couples Euler–Bernoulli beam equation to the...     

Systematic Modulation of Thiol Functionalities in Inexpensive Porous Polymers for Effective Mercury Removal

Through accumulation, mercury contamination in aquatic systems still poses serious health risks despite the strict regulations on drinking water and industrial discharge. One effective strategy against this is adsorptive removal, in which a suitably functionalized porous material is added to water treatment protocols. Thiol (SH) group-grafted structures perform commendably; however, insufficient attention is paid to the cost, scalability, and reusability or how the arrangement of sulfur atoms could affect the Hg^II binding strength. We used an inexpensive and scalable porous covalent organic polymer (COP-130) to systematically introduce thiol functional groups with precise chain lengths and sulfur content. Thiol-functionalized COP-130 demonstrates enhanced wettability and excellent Hg^II uptake of up to 936 mg g⁻¹, with fast kinetics and exceptionally high selectivity. These Hg adsorbents are easily regenerated with HCl and can be used at least six times without loss of capacity even after treatment with strong acid, a rare performance in the domain of Hg-removal research.     

Purification of transferrin by magnetic immunoaffinity beads

Immunoaffinity adsorbent for transferrin (Tf) purification was prepared by immobilizing anti‐transferrin (Anti‐Tf) antibody on magnetic monosizepoly(glycidyl methacrylate) beads, which were synthesized by dispersion polymerization technique in the presence of Fe₃O₄nanopowder and obtained with an average size of 2.0 μm. The magnetic poly(glycidyl methacrylate) (mPGMA) beads were characterized by Fourier transform infrared spectroscopy, swelling tests, scanning electron microscopy, electron spin resonance spectroscopy, thermogravimetric analysis and zeta sizing analysis. The density and swelling ratio of the beads were 1.08 g/cm³ and 52%, respectively. Anti‐Tf molecules were covalently coupled through epoxy groups of mPGMA. Optimum binding of anti‐Tf was 2.0 mg/g. Optimum Tf binding from aqueous Tf solutions was determined as 1.65 mg/g at pH 6.0 and initial Tf concentration of 1.0 mg/mL. There was no remarkable loss in the Tf adsorption capacity of immunoaffinity beads after five adsorption–desorption cycles. Tf adsorption from artificial plasma was also investigated and the purity of the Tf molecules was shown with gel electrophoresis studies.     

A new Approach for the Voltammetric Sensing of the Phytoestrogen Genistein at a Non-modified Boron-doped Diamond Electrode

An effective electrochemical sensor was constructed using an unmodified boron-doped diamond electrode for determination of genistein by square-wave voltammetry. Cyclic voltammetric investigations of genistein with HClO₄ solution indicated that irreversible behavior, adsorption-controlled and well-defined two oxidation peaks at about +0.92 (P_A1) & +1.27 V (P_A2). pH, as well as supporting electrolytes, are important in genistein oxidations. Quantification analyses of genistein were conducted using its two oxidation peaks. Using optimized experiments as well as instrumental conditions, the current response with genistein was proportionately linear in the concentrations range of 0.1 to 50.0 μg mL⁻¹ (3.7×10⁻⁷−1.9×10⁻⁴ mol L⁻¹), by the detection limit of 0.023 μg mL⁻¹ (8.5×10⁻⁸ mol L⁻¹) for P_A1 and 0.028 μg mL⁻¹ (1.1×10⁻⁷ mol L⁻¹) for P_A2 in 0.1 mol L⁻¹ HClO₄ solution (in the open circuit condition at 30 s accumulation time). Ultimately, the developed method was effectively applied to detect genistein in model human urine samples by using its second oxidation peak (P_A2).     

Oxalic acid removal from wastewater using multi-walled carbon nanotubes: Kinetic and equilibrium analysis

Oxalic acid adsorption from aqueous solution is studied in this work. Multi-walled carbon nanotubes (MWCNT) were used as an adsorbent. The investigated adsorption variables are equilibrium time, initial acid concentration, and temperature. The experimental results were presented using equilibrium isotherm and kinetic models. The used equilibrium models are Langmuir, Freundlich, and Temkin adsorption isotherms. And the kinetic models are Elovich, Lagergren pseudo-first-order and pseudo-second-order kinetic models. The thermodynamics studies were carried out at three different temperatures: 278, 298, and 318 K. Langmuir isotherm was the best fitted equilibrium model for the experimental data. The all applied kinetic models fitted the data suitably.     

Pore-Scale Analysis of NAPL Blob Dissolution and Mobilization in Porous Media

A pore-scale analysis of nonaqueous phase liquid (NAPL) blob dissolution and mobilization in porous media was presented. Dissolution kinetics of residual NAPLs in an otherwise water-saturated porous medium was investigated by conducting micromodel experiments. Changes in residual NAPL volume were measured from recorded video images to calculate the mass transfer coefficient, K and the lumped mass transfer rate coefficient, k. The morphological characteristics of the blobs such as specific and intrinsic area were found to be independent of water flow rate except at NAPL saturations below 2%. Dissolution process was also investigated by separating the mass transfer into zones of mobile and immobile water. The fractions of total residual NAPL perimeters in contact with mobile water and immobile water were measured and their relationship to the mass transfer coefficient was discussed. In general, residual NAPLs are removed by dissolution and mobilization. Although these two mechanisms were studied individually by others, their simultaneous occurrence was not considered. Therefore, in this study, mobilization of dissolving NAPL blobs was investigated by an analysis of the forces acting on a trapped NAPL blob. A dimensional analysis was performed to quantify the residual blob mobilization in terms of dimensionless Capillary number (Ca _I). If Ca _I is equal to or greater than the trapping number defined as , then blob mobilization is expected.