Molar Volume Calculation of Molten Ag–Au–Cu and Cu–Ag–In Alloy Systems Using General Solution Model

Russian Journal of Physical Chemistry A - However, up to the present, there was few reports on the density of the molten Ag–Au–Cu and Cu–Ag–In alloy systems. In this work,...     

Parametric optimization of heat transfer characteristics for helical coils

Journal of Thermal Analysis and Calorimetry - In this study, helically coiled tubes are used in a shell, and the effects of tube diameter, coil diameter, Reynolds number, Dean number and flow rate...     

Investigation of heat transfer by means of pool film boiling on vertical cylinders in gravity

In this study, the heat transfer by means of pool film boiling on immersed vertical cylindrical rods was investigated. For this purpose, the rods with various dimensions, which have been heated up to 600°C, were immersed in a pure water pool in the different temperatures. The centre temperature and water temperature versus operation time were measured by K type thermocouples at the atmospheric pressure. After experimental studies, the surface temperatures of rods and heat transfer coefficients were calculated by means of Lumped method from the measured temperatures. Consequently, an empirical equation was developed between the Nusselt, Grashof, Prandtl and Jakob numbers. The experimental results showed that the specimens having the same characteristic lengths exhibited the same heat transfers performance although the specimen’s diameters and lengths differed considerably.     

Two-dimensional transient dynamic response of orthotropic layered media

In this study, two-dimensional transient dynamic response of orthotropic plane layered media is investigated. The plane multilayered media consist of N different generally orthotropic, homogeneous and linearly elastic layers with different ply angles. In the generally orthotropic layer, representing a ply reinforced by unidirectional fibers with an arbitrary orientation angle, the principal material directions do not coincide with body coordinate axes. The solution is obtained by employing a numerical technique which combines the use of Fourier transform with the method of characteristics. The numerical results are displayed in curves denoting the variations of stress and displacement components with time at different locations. These curves clearly reveal, in wave profiles, the scattering effects caused by the reflections and refractions of waves at the boundaries and at the interfaces of the layers, and also the effects of anisotropy caused by fiber orientation angle. The curves properly predict the sharp variations in the response at the neighborhood of the wave fronts, which shows the power of the numerical technique employed in the study. By suitably adjusting the elastic constants, the results for multilayered media with transversely isotropic layers, or layers with cubic symmetry, or isotropic layers can easily be obtained from the general formulation. Furthermore, solutions for some special cases, including Lamb’s problem for an elastic half-space, are obtained and compared with the available solutions in the literature and very good agreement is found. Preliminary version presented at the Second International Congress on Mechatronics (MECH2K3), Graz, Austria, July 14-17, 2003.     

Thermodynamic description of the viscosity of liquid solder alloys with minor Co impurities

Because of the increasing complexity and cost of experiments carried out, the data for the multi-component alloy systems have frequently been obtained by numerical modelling. It is clear that the related calculations require reliable data dealing with the pure components and binary alloy systems. Selecting the reliable data concerning the pure components from the literature, the viscosities for the SAC and (SAC)_1?x Co_x solder alloys have been calculated using different viscosity models (geometric and physical). The viscosity decreases as the amount of tin content increases in the SAC387 alloy while the addition of the cobalt to SAC387 solder results in the increasing of the viscosity. Moreover, by computing the root mean square values between theoretical and experimental viscosities, it can be concluded that the lowest value among all models is that of obtained by Kaptay equation.     

Effect of reactive and nonreactive surface modifications and compatibilizer use on mechanical and flame-retardant properties of linear low-density polyethylene filled with huntite and hydromagnesite mineral

Journal of Thermal Analysis and Calorimetry - In the current study, huntite and hydromagnesite (HH) was used as flame-retardant additive in linear low-density polyethylene (LLDPE). The effect of HH...     

On the existence of positive solutions of the p‐Laplacian dynamic equations on time scales

In this paper, we investigate the existence of positive solutions for a nonlinear m‐point boundary value problem for the p‐Laplacian dynamic equations on time scales, by applying a Krasnosel'skii's fixed point theorem. As an application, an example is included to demonstrate the main results. Copyright © 2017 John Wiley & Sons, Ltd.     

Stereochemical assignments of aldol products of 2‐arylimino‐3‐aryl‐thiazolidine‐4‐ones by 1H NMR

The aldol reactions of 2‐arylimino‐3‐aryl‐thiazolidine‐4‐ones with benzaldehyde carried out at ?78 °C were found to produce sec‐carbinols. Intramolecular hydrogen bonding within the aldol products forming a six‐membered ring enabled the assignment of stereochemistries of the major and minor diastereomers via analysis of the syn and anti ³J_H,H ¹H NMR coupling constants. Copyright © 2012 John Wiley & Sons, Ltd.     

Polyfluorene Thin Films Synthesized by a Novel Plasma Polymerization Method

The synthesis of polyfluorene (PF) thin films by simultaneously superposing a continuous and pulsed discharge and the characterizations of these samples are presented. The double discharge plasma system is constructed by superposing two discharges; namely, a low pressure dc glow one and a high current pulsed one. The fluorene monomer in powder form was vaporized in the system at argon plasma without any modification, at 0.5 mbar operating pressure. The structure of the thin films was investigated via XPS, UV–visible, FTIR, XRD and SEM. The FTIR and the UV–visible results revealed that the fluorene structure was retained at the produced samples. Semi-conducting behavior was established, and upon the iodine doping, the optical energy band gap (E _g ) dropped down from 3.7 to 2.4 eV. The morphology of the synthesized PF thin films was amorphous, with granular structures of different sizes depending on the location of the substrate.