Synergistic Effects of Pseudocolor Imaging,Differentiation, and Square and Logarithmic Conversion on Accuracy of Quantification of Chemical Characteristics Using Test Strips and Similar Products

Test strips and similar products are highly feasible tools for the rapid and approximate determination of chemical characteristics. Although the application of both the quantitative observation of coloration and regression modeling has recently enabled these products to become quantitative tools, their precision and accuracy may be further improved. In this study, the pseudocolor imaging of the coloration image, derivative spectrophotometry-like differentiation of the coloration values, and logarithmic conversion of the raw and derivative values were compared in terms of the precision and accuracy of the quantitative determination of corrosiveness, glucose, nitrate, and pH using the products. The best regression models for the determination were provided by the combination of pseudocolor imaging and differentiation (nitrate and pH); pseudocolor imaging, differentiation, and square-conversion (corrosiveness); or all of the techniques (glucose). When compared to the use of the original 10 raw coloration variables of red-green-blue, cyan-magenta-yellow-key black, and L*a*b* color models only, the above combinations improved the normalized mean absolute error from 14.8% to 3.09% (corrosiveness), 6.33% to 3.15% (glucose), 7.46% to 4.56% (nitrate), and 3.22% to 0.94% (pH). These achievements were largely attributed to the combination of multiple variables that have non-linear and nonmonotonic relationships with the chemical characteristics.     

Rational Molecular Design towards Vis/NIR Absorption and Fluorescence by using Pyrrolopyrrole aza‐BODIPY and its Highly Conjugated Structures for Organic Photovoltaics

Pyrrolopyrrole aza‐BODIPY (PPAB) developed in our recent study from diketopyrrolopyrrole by titanium tetrachloride‐mediated Schiff‐base formation reaction with heteroaromatic amines is a highly potential chromophore due to its intense absorption and fluorescence in the visible region and high fluorescence quantum yield, which is greater than 0.8. To control the absorption and fluorescence of PPAB, particularly in the near‐infrared (NIR) region, further molecular design was performed using DFT calculations. This results in the postulation that the HOMO–LUMO gap of PPAB is perturbed by the heteroaromatic moieties and the aryl‐substituents. Based on this molecular design, a series of new PPAB molecules was synthesized, in which the largest redshifts of the absorption and fluorescence maxima up to 803 and 850 nm, respectively, were achieved for a PPAB consisting of benzothiazole rings and terthienyl substituents. In contrast to the sharp absorption of PPAB, a PPAB dimer, which was prepared by a cross‐coupling reaction of PPAB monomers, exhibited panchromatic absorption across the UV/Vis/NIR regions. With this series of PPAB chromophores in hand, a potential application of PPAB as an optoelectronic material was investigated. After identifying a suitable PPAB molecule for application in organic photovoltaic cells based on evaluation using time‐resolved microwave conductivity measurements, a maximized power conversion efficiency of 1.27 % was achieved.     

Brush‐First ROMP of poly(ethylene oxide) macromonomers of varied length: impact of polymer architecture on thermal behavior and Li+ conductivity

The properties of polymeric materials are dictated not only by their composition but also by their molecular architecture. Here, by employing brush‐first ring‐opening metathesis polymerization (ROMP), norbornene‐terminated poly(ethylene oxide) (PEO) macromonomers ( MM‐n , linear architecture), bottlebrush polymers ( Brush‐n , comb architecture), and brush‐arm star polymers ( BASP‐n , star architecture), where n indicates the average degree of polymerization (DP) of PEO, are synthesized. The impact of architecture on the thermal properties and Li⁺ conductivities for this series of PEO architectures is investigated. Notably, in polymers bearing PEO with the highest degree of polymerization, irrespective of differences in architecture and molecular weight (~100‐fold differences), electrolytes with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as an Li⁺ source exhibit normalized ionic conductivities (σ_n) within only 4.9 times difference (σ_n = 29.8 × 10^?5 S cm^?1 for MM‐45 and σ_n = 6.07 × 10^?5 S cm^?1 for BASP‐45 ) at a concentration of Li⁺ r = [Li⁺]/[EO] = 1/12 at 50 °C. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 448–455     

Dual Emission from Precious Metal-Free Luminophores Consisting of C,H, O,Si, and S/P at Room Temperature

Fluorescence–phosphorescence dual-emissive compounds are valuable tools for ratiometric luminescence sensing. Herein, it is reported that 2,5-bis(phenylsulfonyl)- and 2,5-bis[bis(4-methoxyphenyl)phosphinyl]-1,4-disiloxybenzenes exhibit dual emission with emission peaks that were easily identified without performing time-gated measurement. The disiloxybenzenes in powder simultaneously fluoresced and phosphoresced at 358–374 and 457–470 nm, respectively, under vacuum. The intensity ratios of the phosphorescence/fluorescence maxima of the disiloxybenzenes in powder and in a thin film of poly(methyl methacrylate) were sensitive to temperature and molecular oxygen, respectively. The plots of the relative intensity versus temperature or partial pressure of molecular oxygen were well fitted with calibration curves defined by an exponential approximation with excellent correlation coefficients R² (0.9708–0.9921), demonstrating the high potential of the disiloxybenzenes as precious metal-free probes applicable to ratiometric luminescence sensing.     

Metal-Free Twofold Electrochemical C−H Amination of Activated Arenes: Application to Medicinally Relevant Precursor Synthesis

The efficient production of many medicinally or synthetically important starting materials suffers from wasteful or toxic precursors for the synthesis. In particular, the aromatic non-protected primary amine function represents a versatile synthetic precursor, but its synthesis typically requires toxic oxidizing agents and transition metal catalysts. The twofold electrochemical amination of activated benzene derivatives via Zincke intermediates provides an alternative sustainable strategy for the formation of new C−N bonds of high synthetic value. As a proof of concept, we use our approach to generate a benzoxazinone scaffold that gained attention as a starting structure against castrate-resistant prostate cancer. Further improvement of the structure led to significantly increased cancer cell line toxicity. Thus, exploiting environmentally benign electrooxidation, we present a new versatile and powerful method based on direct C−H activation that is applicable for example the production of medicinally relevant compounds.     

Large Enhancement of the Single-Molecular Conductance of a Molecular Wire through a Radical Substituent

The single-molecular conductance between two π-conjugated wires with and without a radical substituent has been compared. Specifically, methyl- and iminonitroxide-substituted 4-(biphenyl-4-yl)pyridine wires bound onto a porphyrin template were subjected to scanning tunneling microscopy (STM) apparent-height measurement at the interface between highly oriented pyrolytic graphite (HOPG) and octan-1-oic acid. Statistical analysis of the STM images revealed that the radical-substituted wire has 3.2±1.7-fold higher conductance than the methyl-substituted reference. Although density functional theory (DFT) calculation suggests that only 17 % of the SOMO is distributed on the wire moiety, the effect was significant. This study presents the potential of radical substituents to achieve high conductivity in molecular wires.     

In situ Observation of Evolving H2 and Solid Electrolyte Interphase Development at Potassium Insertion Materials within Highly Concentrated Aqueous Electrolytes

The solid-electrolyte interphase (SEI) is key to stable, high voltage lithium-ion batteries (LIBs) as a protective barrier that prevents electrolyte decomposition. The SEI is thought to play a similar role in highly concentrated water-in-salt electrolytes (WISEs) for emerging aqueous batteries, but its properties remain unknown. In this work, we utilized advanced scanning electrochemical microscopy (SECM) and operando electrochemical mass spectrometry (OEMS) techniques to gain deeper insight into the SEI that occurs within highly concentrated WISEs. As a model, we focus on a 55 mol/kg K(FSA)_0.6(OTf)_0.4 electrolyte and a 3,4,9,10-perylenetetracarboxylic diimide negative electrode. For the first time, our work showed distinctly passivating structures with slow apparent electron transfer rates alike to the SEI found in LIBs. In situ analyses indicated stable passivating structures when PTCDI was stepped to low potentials (≈−1.3 V vs. Ag/AgCl). However, the observed SEI was discontinuous at the surface and H₂ evolution occurred as the electrode reached more extreme potentials. OEMS measurements further confirmed a shift in the evolution of detectable H₂ from −0.9 V to <−1.4 V vs. Ag/AgCl when changing from dilute to concentrated electrolytes. In all, our work shows a combined approach of traditional battery measurements with in situ analyses for improving characterization of other unknown SEI structures.