Development of a Chitosan/Nickel Phthalocyanine Composite Based Conductometric Micro-sensor for Methanol Detection

Thin-film composite of chitosan/nickel phthalocyanine (NiPc) was electrochemically deposited on the fingers of interdigitated gold electrodes, applying chronoamperometric polymerization technique. The presence of crystallized NiPc in the chitosan was confirmed by EDX and FTIR analysis. Acetone, ethanol, and methanol gas-sensing properties of the films prepared at optimum conditions were studied at atmospheric temperature, through differential measurements at an optimized frequency of 10 kHz, using a lock-in amplifier. The conductometric sensor presents the highest sensitivity of 60.2 μS.cm⁻¹(v/v) for methanol and 700 ppm as the limit of detection. For validation, the methanol content of a commercial rubbing alcohol was determined.     

Hierarchical Analysis of Self‐Assembled PEGylated Hexaphenylalanine Photoluminescent Nanostructures

Despite the growing literature about diphenylalanine‐based peptide materials, it still remains a challenge to delineate the theoretical insight into peptide nanostructure formation and the structural features that could permit materials with enhanced properties to be engineered. Herein, we report the synthesis of a novel peptide building block composed of six phenylalanine residues and eight PEG units, PEG₈‐F6. This aromatic peptide self‐assembles in water in stable and well‐ordered nanostructures with optoelectronic properties. A variety of techniques, such as fluorescence, FTIR, CD, DLS, SEM, SAXS, and WAXS allowed us to correlate the photoluminescence properties of the self‐assembled nanostructures with the structural organization of the peptide building block at the micro‐ and nanoscale. Finally, a model of hexaphenylalanine in aqueous solution by molecular dynamics simulations is presented to suggest structural and energetic factors controlling the formation of nanostructures.     

Prediction of branch on branch and topological characteristics of low‐density polyethylene polymerization by a novel stochastic approach

A novel approach using Monte Carlo method applied to simulation of low‐density polyethylene (LDPE) polymerization in tubular reactor showing topological characteristics, and the comprehensive kinetic mechanism has been taken into consideration. The results show the precise details of the structure of a chain in the three levels of the backbone, the main branches, and branches on branch. The chain types include dead polymer, dead polymer with unsaturated end, and live polymer with primary radical, secondary radical, and tertiary radical. In this work, the branches on branch were identified in terms of number, length, and position of the branch. Sixty percent of branches on branch are 1 to 5 carbons long, and the longest branch on branch is about 50 carbons. Thus, this study provides a tool for more accurately mapping the polymer chains architecture, superior to determine the number, and position of long‐ and short‐chain branches in past researches. Finally, this approach will advance the prediction of microstructure‐related properties of polymer one step further.     

Validation of a robust and rapid liquid chromatography tandem mass spectrometric method for the quantitative analysis of navitoclax

The Bcl-2 family small molecule inhibitor navitoclax is being clinically evaluated to treat multiple cancers including lymphoid malignancies and small cell lung cancer. A sensitive and reliable method was developed to quantitate navitoclax in human plasma using liquid chromatography with tandem mass spectrometry with which to perform detailed pharmacokinetic studies. Sample preparation involved protein precipitation using acetonitrile. Separation of navitoclax and the internal standard, navitoclax-d8, was achieved with a Waters Acquity UPLC BEH C₁₈ column using isocratic flow over a 3 min total analytical run time. A SCIEX 4500 triple quadrupole mass spectrometer operated in positive electrospray ionization mode was used for the detection of navitoclax. The assay range was 5–5,000 ng/ml and proved to be accurate (89.5–104.9%) and precise (CV ≤ 11%). Long-term frozen plasma stability for navitoclax at −70°C was at least 43 months. The method was applied for the measurement of total plasma concentration of navitoclax in a patient receiving a 250 mg daily oral dose.     

Water stability of cobalt doped ZIF-8: a quantitative study using optical analyses

Zeolitic imidazolate frameworks (ZIFs), in particular ZIF-8 (made of Zn²⁺ and 2-methyilimidazolate) and cobalt-doped-ZIF-8, are found important for many energy and environmental applications. It was reported that ZIFs show excellent structural stability in water and thus ideal for aqueous applications. However, recent studies also found some evidence that ZIF-8 undergoes hydrolysis in water. Despite the importance of ZIF's stability in many aqueous applications, the extent of ZIFs' degradation in water is still not yet fully understood. In this study, we report a quantitative study of the water stability of 0–100 at% cobalt-doped ZIF-8, using a new combination of analytical tools. The study demonstrated the importance of analyzing both filtered powders and the filtrate liquid systematically, in particular by using UV–Vis spectroscopy and thermogravimetric analysis. The combination of analytical tools allowed the study on the effects of ZIF concentrations in water, cobalt doping levels, and amounts of ligands in water on the water stability of ZIF samples. The effect of cobalt-doping was investigated by using ZIF particles with identical sizes (200–400 nm), in order to eliminate the effects of particle size on hydrolysis. Unlike other synthesis methods, a mechanochemical ball milling method allowed the production of nano-scale ZIF-8 particles with similar sizes, independent of cobalt-doping levels. The proposed combination of analytical tools including UV–Vis spectroscopy can be applied to the study of the water stability of other MOF materials.