Vacuum‐driven fluid manipulation by a piezoelectric diaphragm micropump for microfluidic droplet generation with a rapid system response time

Recently, we developed a convenient microfluidic droplet generation device based on vacuum‐driven fluid manipulation with a piezoelectric diaphragm micropump. In the present study built on our previous work, we investigate the influence of settings applied to the piezoelectric pump, such as peak‐to‐peak drive voltage (V_p‐p) and wave frequency, on droplet generation characteristics. Stepwise adjustments to the drive voltage in ±10‐V_p‐p increments over the range of 200?250 V_p‐p during droplet creation revealed that the droplet generation rate could be reproducibly controlled at a specific drive voltage. The droplet generation rate switched within <0.5 s after the input of a new voltage. Although the droplet generation rate depended on the drive voltage, this setting had almost no influence on droplet size. The frequency over the selected range (50?60 Hz) did not markedly influence the droplet generation rate or droplet size. We show that the current fluid manipulation system can be conveniently used for both droplet generation and for rapid droplet reading, which is required in many microfluidic‐based applications.     

Dynamics of water in real space and time

Owing to marked advances in instrumentation in X-ray and neutron scattering the time-dependent pair correlation function, the Van Hove function, can now be determined by inelastic X-ray and neutron scattering measurements. The local dynamics of water in real space and time is visualised by this approach. We discuss how the dynamic properties, such as viscosity and diffusion, can be elucidated through the Van Hove function of water.     

Synthesizing Interpenetrated Triazine-based Covalent Organic Frameworks from CO2

Crystalline triazine-based covalent organic frameworks (COFs) are aromatic nitrogen-rich porous materials. COFs typically show high thermal/chemical stability, and are promising for energy applications, but often require harsh synthesis conditions and suffer from low crystallinity. In this work, we propose an environmentally friendly route for the synthesis of crystalline COFs from CO₂ molecules as a precursor. The mass ratio of CO₂ conversion into COFs formula unit reaches 46.3 %. The synthesis consists of two steps; preparation of 1,4-piperazinedicarboxaldehyde from CO₂ and piperazine, and condensation of the dicarboxaldehyde and melamine to construct the framework. The CO₂-derived COF has a 3-fold interpenetrated structure of 2D layers determined by powder X-ray diffraction, high-resolution transmission electron microscopy, and select-area electron diffraction. The structure shows a high Brunauer–Emmett–Teller surface area of 945 m² g⁻¹ and high stability against strong acid (6 M HCl), base (6 M NaOH), and boiling water over 24 hours. Post-modification of the framework with oxone has been demonstrated to modulate hydrophilicity, and it exhibits proton conductivity of 2.5×10⁻² S cm⁻¹ at 85 °C, 95 % of relative humidity.     

Glycosyl‐Templated Chiral Helix Stapling of Ethynylpyridine Oligomers by Alkene Metathesis between Inter‐Pitch Side Chains

Ethynylpyridine polymers and oligomers consisting of 4‐substituted pyridine rings linked by acetylene bonds at the 2‐ and 6‐positions have been investigated. Ethynylpyridine oligomers covalently linked with a glycosyl chiral template form chiral helical complexes by intramolecular hydrogen bonding, in which the chirality of the template is translated to the helix. With a view to fixation of the chiral architecture, D /L ‐galactosyl‐ and D /L ‐mannosyl‐linked ethynylpyridine oligomers have been developed with 4‐(3‐butenyloxy)pyridine units having alkene side chains. The helical structures are successfully stapled by alkene metathesis of the side chains. Subsequent removal of the chiral templates by acidolysis produces template‐free stapled oligomers. The chiral, template‐free, stapled oligomers show chiral helicity, which is resistant to polar solvents and heating.     

Native Mannose‐Dominant Extraction by Pyridine–Phenol Alternating Oligomers Having an Extremely Efficient Repeating Motif of Hydrogen‐Bonding Acceptors and Donors

Pyridine–phenol alternating oligomers in which pyridine and phenol moieties are alternatingly linked through acetylene bonds at the 2,6‐positions of the aromatic rings were designed and synthesized. The pyridine nitrogen atom and the neighboring phenolic hydroxyl group were oriented so that they do not form an intramolecular hydrogen bond but cooperatively act as hydrogen‐bonding acceptor and donor in a push–pull fashion for the hydroxyl group of saccharides. The longer oligomer strongly bound to lipophilic glycosides in 1,2‐dichloroethane, and association constants approached 10⁸ M ^?1. Moreover, the oligomer extracted native saccharides from a solid phase to apolar organic solvents up to the extent of an equal amount of the oligomer and showed mannose‐dominant extraction among naturally abundant hexoses. The oligomer bound to native saccharides even in 20 % DMSO‐containing 1,2‐dichloroethane and exhibited association constants of greater than 10 M ^?1 for D ‐mannose and D ‐glucose.     

A GENERAL FREQUENCY DEPENDENT DIGITAL OPTIMAL PREVIEW SERVO SYSTEM

ＡＧＥＮＥＲＡＬＦＲＥＱＵＥＮＣＹＤＥＰＥＮＤＥＮＴＤＩＧＩＴＡＬＯＰＴＩＭＡＬＰＲＥＶＩＥＷＳＥＲＶＯＳＹＳＴＥＭＡＧＥＮＥＲＡＬＦＲＥＱＵＥＮＣＹＤＥＰＥＮＤＥＮＴＤＩＧＩＴＡＬＯＰＴＩＭＡＬＰＲＥＶＩＥＷＳＥＲＶＯＳＹＳＴＥＭ￥ＬｉａｏＦｕｃｈ...