Comparative study on the thermal behavior of structural concretes of sodium-cooled fast reactor

Journal of Thermal Analysis and Calorimetry - Thermal behaviors of two different siliceous concretes used in a sodium-cooled fast reactor were comparatively investigated in a temperature range from...     

Modulating the ground state,stability and charge transport in OFETs of biradicaloid hexahydro-diindenopyrene derivatives and a proposed method to estimate the biradical character

Biradicaloid compounds with an open-shell ground state have been the subject of intense research in the past decade. Although diindenoacenes are one of the most developed families, only a few examples have been reported as active layers in organic field-effect transistors (OFETs) with a charge mobility of around 10⁻³ cm² V⁻¹ s⁻¹ due to a steric disadvantage of the mesityl group to kinetically stabilize compounds. Herein, we disclose our efforts to improve the charge transport of the diindenoacene family based on hexahydro-diindenopyrene (HDIP) derivatives with different annelation modes for which the most reactive position has been functionalized with (triisopropylsilyl)ethynyl (TIPS) groups. All the HDIP derivatives show remarkably higher stability than that of TIPS-pentacene, enduring for 2 days to more than 30 days, which depends on the oxidation potential, the contribution of the singlet biradical form in the ground state and the annelation mode. The annelation mode affects not only the band gap and the biradical character (y₀) but also the value of the singlet–triplet energy gap (ΔE_S–T) that does not follow the reverse trend of y₀. A method based on comparison between experimental and theoretical bond lengths has been disclosed to estimate y₀ and shows that y₀ computed at the projected unrestricted Hartree–Fock (PUHF) level is the most relevant among those reported by all other methods. Thanks to their high stability, thin-film OFETs were successfully fabricated. Well balanced ambipolar transport was obtained in the order of 10⁻³ cm² V⁻¹ s⁻¹ in the bottom-gate/top-contact configuration, and unipolar transport in the top-gate/bottom-contact configuration was obtained in the order of 10⁻¹ cm² V⁻¹ s⁻¹ which is the highest value obtained for biradical compounds with a diindenoacene skeleton.

Biradicaloid HDIP derivatives show that the ΔE_S–T gap does not follow the reverse trend of the biradical character but depends more on the delocalization of the radical centres at the outer rings.     

Biosynthesis of Indole Diterpene Lolitrems: Radical-Induced Cyclization of an Epoxyalcohol Affording a Characteristic Lolitremane Skeleton

Lolitrems are tremorgenic indole diterpenes that exhibit a unique 5/6 bicyclic system of the indole moiety. Although genetic analysis has indicated that the prenyltransferase LtmE and the cytochrome P450 LtmJ are involved in the construction of this unique structure, the detailed mechanism remains to be elucidated. Herein, we report the reconstitution of the biosynthetic pathway for lolitrems employing a recently established genome-editing technique for the expression host Aspergillus oryzae. Heterologous expression and bioconversion of the various intermediates revealed that LtmJ catalyzes multistep oxidation to furnish the lolitrem core. We also isolated the key reaction intermediate with an epoxyalcohol moiety. This observation allowed us to establish the mechanism of radical-induced cyclization, which was firmly supported by density functional theory calculations and a model experiment with a synthetic analogue.     

Stereo-dynamical ion-pair formation in collisions of highly-charged ions with argon dimers

Multiple ionization process of a rare gas dimer BC collided with a slow highly charged ion A^q+ is investigated with the three-center Coulombic over-barrier model previously developed by the present authors. To reveal stereodynamical effects, we calculate asymmetric ion-pair formation cross sections σ(Q_B,Q_C) as a function of the orientation angle. We introduce a pair of atomic impact parameters b_B and b_C with which we distinguish the near and far sites. Furthermore, we distinguish the forward and backward emitted ions produced as a result of Coulomb explosion. Partial screening effects are also considered.     

A simple high‐performance liquid chromatography for the determination of linezolid in human plasma and saliva

Linezolid is an antimicrobial agent for the treatment of multiresistant Gram‐positive infections. A practical high‐performance liquid chromatography method was developed for the determination of linezolid in human plasma and saliva. Linezolid and an internal standard (o‐ethoxybenzamide) were extracted from plasma and saliva with ethyl acetate and analyzed on a Capcell Pak C₁₈ MG column with UV detection at 254 nm. The calibration curve was linear through the range 0.5–50 µg/mL using a 200 μL sample volume. The intra‐ and interday precisions were all <6.44% for plasma and 5.60% for saliva. The accuracies ranged from 98.8 to 110% for both matrices. The mean recoveries of linezolid were 80.8% for plasma and 79.0% for saliva. This method was used to determine the plasma and saliva concentrations of linezolid in healthy volunteers who were orally administered a 600 mg dose of linezolid. Our liquid–liquid extraction procedure is easy and requires a small volume of plasma or saliva (200 μL). This small volume can be advantageous in clinical pharmacokinetic studies, especially if children participate. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and radical polymerization of methacrylate endowed with bicyclobis(γ‐butyrolactone) moiety through methylene linker

A series of methacrylates bearing bicyclobis(γ‐butyrolactone) (BBL) moiety were synthesized and radically polymerized to afford the corresponding poly(methacrylate)s bearing BBL moiety in the side chain, with expecting that the high polarity and rigidity of BBL would be inherited by the polymers. The resulting polymers were soluble in polar aprotic solvents such as dimethyl sulfoxide and N,N‐dimethylformamide because of the high polarity of the BBL moiety. The glass transition temperatures (T_g) of the polymers depended on the length of methylene linker that tethered the methacrylate and BBL moieties, making the use of shorter linkers lead to higher T_gs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2462–2468     

Preparation of polymethyl methacrylate with well-controlled stereoregularity by anionic polymerization in an ionic liquid solvent

This study investigates the effect of ionic liquids (ILs) on the anionic polymerization of methyl methacrylate (MMA). Polymethyl methacrylate (PMMA), an isotactic polymer, is prepared by anionic polymerization at a high reaction temperature with an IL that acts as both solvent and additive. The most plausible reaction mechanism is determined using ¹H NMR and Fourier-transform infrared spectroscopy. The electrostatic interaction between MMA and the IL increases the apparent steric hindrance in MMA, resulting in the isotactic PMMA.     

One-Pot Synthesis of Enantioenriched β-Amino Secondary Amides via an Enantioselective [4+2] Cycloaddition Reaction of Vinyl Azides with N-Acyl Imines Catalyzed by a Chiral Brønsted Acid

A catalytic enantioselective synthesis of β-amino secondary amides was achieved using vinyl azides as the enamine-type nucleophile and chiral N-Tf phosphoramide as the chiral Brønsted acid catalyst through a five-step sequential transformation in one pot. The established sequential transformation involves an enantioselective [4+2] cycloaddition reaction of vinyl azides with N-acyl imines as the key stereo-determining step that is efficiently accelerated by a chiral N-Tf phosphoramide catalyst in a highly enantioselective manner in most cases. Further generation of the iminodiazonium ion intermediate through ring opening of the cycloaddition product and subsequent skeletal rearrangement involving Schmidt-type 1,2-aryl group migration followed by recyclization of the resulting nitrilium ion were also initiated by the same acid catalyst. Final acid hydrolysis of the recyclized products in the same pot gave rise to enantioenriched β-amino amides through C−C bond formation at the α-position of the secondary amides.     

Enhancement of Photocatalytic Activity for Hydrogen Production by Surface Modification of Pt-TiO2 Nanoparticles with a Double Layer of Photosensitizers

To investigate the effect of the surface structure of dye-sensitized photocatalyst nanoparticles, we prepared three types of Ru^II-photosensitizer (PS)-double-layered Pt-cocatalyst-loaded TiO₂ nanoparticles with different surface structures, Zr- RuCP⁶ -Zr- RuP⁶ @N wt %Pt-TiO₂, RuCP⁶ -Zr- RuP⁶ @N wt %Pt-TiO₂, and RuCP² -Zr- RuP⁶ @N wt %Pt-TiO₂ (N=0.2, 1, and 5), and evaluated their photocatalytic H₂ evolution activity in the presence of redox-reversible iodide as the electron donor. Although the driving force of the electron injection from I⁻ to the photo-oxidized Ru^III PS is comparable, the activity increased in the following order: RuCP² -Zr- RuP⁶ @1 wt %Pt-TiO₂ < RuCP⁶ -Zr- RuP⁶ @1 wt %Pt-TiO₂ < Zr- RuCP⁶ -Zr- RuP⁶ @1 wt %Pt-TiO₂. The apparent quantum yield of Zr- RuCP⁶ -Zr- RuP⁶ @1 wt %Pt-TiO₂ in the first hour reached 1 %. Zeta-potential measurements suggest that the surface Zr⁴⁺-phosphate groups attracted I⁻ anions to the nanoparticle–solution interface. Our results indicate that the surface modification of dye-sensitized photocatalysts is a promising approach to enhance photocatalytic activity with various redox mediators.