Crosslinking network of bio‐based bis‐functional epoxides derived from trans‐limonene oxide

The thiol‐ene reaction between trans‐limonene oxide (trans‐LO) and ethane‐1,2‐dithiol in the presence of triethylborane affords a bio‐based bis‐functional epoxide (bis‐trans‐LO). The crosslinking reaction of bis‐trans‐LO with branched polyethyleneimine (BPEI; M_n = 600; BPEI₆₀₀) at a feed ratio of bis‐trans‐LO/BPEI₆₀₀ = 57/43 (wt/wt) yields the corresponding network polymer with T_d10 (10% thermal decomposition temperature) of 304.7 °C in 98% yield. In contrast, negligible amounts of network polymer are obtained by the reaction of bis‐LO (bis‐functional epoxide derived from cis and trans‐LO) and BPEI₆₀₀ regardless of the feed ratio. The mechanical strengths as measured by direct tensile tests of the network polymers derived from bis‐trans‐LO and BPEI_600,1800 (M_n = 600 and 1800) were approximately 16 and 11 times higher than that of bis‐LO and BPEI₁₈₀₀, respectively. The tensile shear strengths of the metal‐to‐metal adhesive bonds induced by bis‐trans‐LO and BPEI_600,1800 were 9.5 and 14.1 MPa, respectively. DMA revealed that the storage modulus of the network polymer derived from bis‐trans‐LO and BPEI₁₈₀₀ in the rubber region was higher than that of the material prepared from bis‐LO and BPEI₁₈₀₀, indicating higher crosslink density of the bis‐trans‐LO/BPEI₁₈₀₀ system. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2466–2473     

Synthesis of Bis(phosphanyl)alkane Monosulfides by the Addition of Diphosphane Monosulfides to Alkenes under Light

Bis-phosphanated compounds are regarded as the most ubiquitous privileged ligand structures in transition-metal catalysis. The development of highly atom economical reactions is of great importance for their syntheses because less atom economical methods often require complicated purification procedures under inert atmospheres to remove excess starting materials and byproducts. Herein, the photoinduced addition reactions of diphosphane monosulfides bearing P^V(S)−P^III single bonds to alkenes is disclosed. These reactions require only equimolar amounts of the diphosphane monosulfide relative to the alkene and facilitate highly selective introduction of two different types of phosphorus-containing groups, such as thiophosphoryl and phosphanyl groups, into a variety of alkenes without any catalyst, base, or additive.     

Organosulfide‐Catalyzed Diboration of Terminal Alkynes under Light

An efficient metal‐free diboration of terminal alkynes is reported. In the presence of a catalytic amount of organosulfides under light, the addition of bis(pinacolato)diboron (B₂pin₂) to terminal alkynes takes place efficiently to produce the corresponding double borylation products in good yields. Mechanistic studies indicate that this metal‐free sulfide‐catalyzed diboration of alkynes likely occurs by generation of a boryl‐centered radical with the aid of light and a sulfide, since such a radical was detected in the reaction mixture by electron spin resonance (ESR) spectroscopy. The present form of catalysis (sulfide/light) is thought to be unprecedented and provides a new means of preparation for organoboranes without heavy metal contamination in the products, which is highly desired in the preparation of drugs and electronic materials.     

meso‐Dibenzoporphycene has a Large Bathochromic Shift and a Porphycene Framework with an Unusual cis Tautomeric Form

meso‐Monobenzoporphycene (mMBPc) and meso‐dibenzoporphycene (mDBPc), in which one or two benzene moieties are fused at ethylene‐bridged positions (meso‐positions) of porphycene, were prepared in an effort to further delocalize the π‐electrons within the porphycene molecule. mMBPc and mDBPc were fully characterized by mass spectrometry, ¹H and ¹³C NMR spectroscopy, and X‐ray crystallography. The longest‐wavelength Q‐bands of mMBPc and mDBPc are red‐shifted by 92 nm and 418 nm, respectively, compared to that of the unsubstituted porphycene (Pc). Electrochemical measurements indicate that the HOMO is destabilized and the LUMO is stabilized by the fused benzene moieties at the meso positions. Furthermore, both XPS and theoretical studies support the presence of a cis tautomeric form in the ground state of mDBPc, despite the fact that essentially all known porphycene derivatives adopt the trans tautomeric form.     

Identification of conjugation positions of urinary glucuronidated vitamin D3 metabolites by LC/ESI–MS/MS after conversion to MS/MS‐fragmentable derivatives

A liquid chromatography/electrospray ionization–tandem mass spectrometry‐based method was developed for the identification of the conjugation positions of the monoglucuronides of 25‐hydroxyvitamin D₃ [25(OH)D₃] and 24,25‐dihydroxyvitamin D₃ [24,25(OH)₂D₃] in human urine. The method employed derivatization with 4‐(4‐dimethylaminophenyl)‐1,2,4‐triazoline‐3,5‐dione to convert the glucuronides into fragmentable derivatives, which provided useful product ions for identifying the conjugation positions during the MS/MS. The derivatization also enhanced the assay sensitivity and specificity for urine sample analysis. The positional isomeric monoglucuronides, 25(OH)D₃‐3‐ and ‐25‐glucuronides, or 24,25(OH)₂D₃‐3‐, ‐24‐ and ‐25‐glucuronides, were completely separated from each other under the optimized LC conditions. Using this method, the conjugation positions were successfully determined to be the C3 and C24 positions for the glucuronidated 25(OH)D₃ and 24,25(OH)₂D₃, respectively. The 3‐glucuronide was not present for 24,25(OH)₂D₃, unlike 25(OH)D₃, thus we found that selective glucuronidation occurs at the C24‐hydroxy group for 24,25(OH)₂D₃.     

Cross‐Coupling of Organolithium with Ethers or Aryl Ammonium Salts by C−O or C−N Bond Cleavage

Various aryl‐, alkenyl‐, and/or alkyllithium species reacted smoothly with aryl and/or benzyl ethers with cleavage of the inert C?O bond to afford cross‐coupled products, catalyzed by commercially available [Ni(cod)₂] (cod=1,5‐cyclooctadiene) catalysts with N‐heterocyclic carbene (NHC) ligands. Furthermore, the coupling reaction between the aryllithium compounds and aryl ammonium salts proceeded under mild conditions with C?N bond cleavage in the presence of a [Pd(PPh₃)₂Cl₂] catalyst. These methods enable selective sequential functionalizations of arenes having both C?N and C?O bonds in one pot.     

Enantioselective copper-catalyzed 1,4-addition of dialkylzincs to enones using a novel N,N,P–Cu(II) complex

Enantioselective copper-catalyzed 1,4-additions of dialkylzincs to enones were carried out in the presence of 1 mol % of Cu(OTf)₂ and 2.5 mol % of an N,N,P-ligand possessing a tert-butyl group at the adjacent position of the nitrogen of pyridine to afford the corresponding 1,4-adducts in up to 98% ee.