The Effect of Viscosity on the Diffusion and Termination Reaction of Organic Radical Pairs

The effect of viscosity on the diffusion efficiency (F_dif) of an organic radical pair in a solvent cage and the termination mechanism, that is, the selectivity of disproportionation (Disp) and combination (Comb) of the geminated caged radical pair and the diffused radicals encountered, were investigated quantitatively by following the photolysis of dimethyl 2,2′-azobis(2-methylpropionate) (V-601) in the absence and presence of PhSD. F_dif and Disp/Comb selectivity outside the cage [Disp_(dif)/Comb_(dif)] are highly sensitive to the viscosity. In contrast, the Disp/Comb selectivity inside the cage [Disp_(cage)/Comb_(cage)] is rather insensitive. The difference in viscosity dependence between Disp_(cage)/Comb_(cage) and Disp_(dif)/Comb_(dif) is explained by the spin state of the radical pair inside and outside the cage and the spin state dependent configurational changes of the radical pair upon their collision. Given that the configurational change of the radicals associates the displacement and reorganization of solvents around the radicals, the termination outside the cage, which requires larger change than that inside the cage, is highly viscosity dependent. Furthermore, while the bulk viscosity of each solvent shows good correlation with F_dif and Disp/Comb selectivity, microviscosity is the better parameter predicting F_dif and Disp_(dif)/Comb_(dif) selectivity regardless of the solvents.     

通过表面机械加工调控Zr52.5Cu17.9Ni14.6Al10Ti5非晶合金的结构和韧性

作为一种新型结构材料, 非晶态合金的韧性需要进一步提高. 提高非晶态合金韧性的方法有引入枝晶相、调整其成分改变其泊松比影响其剪切带衍生、裂纹扩展等.本文通过表面机械加工的方法来调控非晶态合金的微观结构及韧性. 我们采用真空电弧熔炼、亚稳态薄板离心浇铸系统制备了Zr_52.5Cu_17.9Ni_14.6Al₁₀Ti₅ (原子百分比) (Vit105)非晶合金板,并用表面机械研磨处理方法(surface mechanical attrition treatment, SMAT), 在Vit105板上形成纳米尺度局域类晶体序结构. 基于差示扫描量热分析、纳米压痕实验, 我们发现SMAT处理后的Vit105合金板表面附近弛豫焓更低, 微观结构更加均匀、稳定. 通过显微维氏硬度计测试, 发现SMAT处理后样品的表面附近硬度增大,硬度值分布也更均匀. 通过三点弯断裂实验, 可得到SMAT处理后合金板缺口韧度值从70.7 ± 4.7 MPa·m1/2提高到112.8 ± 3.7 MPa·m1/2. SMAT处理后合金板断裂后, 缺口前端剪切带密度比未处理的更大. Vit105合金板韧性的提高源于SMAT处理对剪切带萌生的促进作用. 该研究表明,表面机械加工可以在非晶态合金中形成局域类晶体有序结构, 影响其结构均匀性, 增大其硬度, 促进剪切带萌生, 提高其韧性. 表面机械加工作为一种新型的改变材料性能的手段, 具有广阔的应用前景.      

Synthesis,Structure, Optical,and Electrochemical Properties of Triple‐ and Quadruple‐Decker Co‐facial Tetrathiafulvalene Arrays

Understanding the details of the electronic structure in face‐to‐face arranged tetrathiafulvalenes (TTFs) is very important for the design of supramolecular functional materials and superior conductive organic materials. This article is a comprehensive study of the interactions among columnar stacked TTFs using trimeric (trimer) and tetrameric (tetramer) TTFs linked by alkylenedithio groups (‐S(CH₂)_nS‐, n=1–4) as models of triple‐ and quadruple‐decker TTF arrays. Single‐crystal X‐ray analyses of neutral trimeric TTFs revealed that the three TTF moieties are oriented in a zigzag arrangement. Cyclic voltammetry measurements (CV) reveal that the trimer and tetramer exhibited diverse reversible redox processes with multi‐electron transfers, depending on the length of the ‐S(CH₂)_nS‐ units and substituents. The electronic spectra of the radical cations, prepared by electrochemical oxidation, showed charge resonance (CR) bands in the NIR/IR region (1630–1850 nm), attributed to a mixed valence (MV) state of the triple‐ and quadruple‐decker TTF arrays. In the trimeric systems, the dicationic state (+2; 0.66 cation per TTF unit) was found to be a stable state, whereas the monocationic state (+1) was not observed in the electronic spectra. In the tetrameric system, substituent‐dependent redox processes were observed. Moreover, π‐trimers and π‐tetramers, which show a significant Davydov blueshift in the spectra, are formed in the tricationic (trimer) and tetracationic (tetramer) state. In addition, these attractive interactions are strongly dependent on the length of the linkage unit.     

Evaluating a time-delay of hydrogen production quantitatively in photosynthetic bacteria for stabilizing intermittency

Renewable energy is regarded as a clean energy source but has some problems, one of which is intermittency. To reduce this, the time-delay of hydrogen production by photosynthetic bacteria can be effective. In this study, we qualitatively evaluated the time-delay of hydrogen production by photosynthetic bacteria under various irradiation conditions, and we also quantitatively evaluated it by fitting the experimental data and the hydrogen production model with a genetic algorithm. As a result of model fitting, we found that the relationship between the lengths of the optimized time-delay of hydrogen production by photosynthetic bacteria and the amount of light irradiation is linear. And we also found that the time-delay of hydrogen production by photosynthetic bacteria had an upper limit under low light intensity. We have suggested the existence of an energy store mechanism in photosynthetic bacteria.     

Simultaneous Induction of Axial and Planar Chirality in Arene–Chromium Complexes by Molybdenum‐Catalyzed Enantioselective Ring‐Closing Metathesis

The molybdenum‐catalyzed asymmetric ring‐closing metathesis of the various C_s‐symmetric (π‐arene)chromium substrates provides the corresponding bridged planar‐chiral (π‐arene)chromium complexes in excellent yields with up to >99 % ee. With a bulky and unsymmetrical substituent, such as N‐indolyl or 1‐naphthyl, at the 2‐positions of the η⁶‐1,3‐diisopropenylbenzene ligands, both biaryl‐based axial chirality and π‐arene‐based planar chirality are simultaneously induced in the products. The axial chirality is retained even after the removal of the dicarbonylchromium fragment, and the chiral biaryl/heterobiaryl compounds are obtained with complete retention of the enantiopurity.     

Direct Estimation of the Surface Location of Immobilized Functional Groups for Concerted Catalysis Using a Probe Molecule

The location of active sites during concerted catalysis by a metal complex and tertiary amine on a SiO₂ surface is discussed based on the interaction between the functionalized SiO₂ surface and a probe molecule, p‐formyl phenylboronic acid. The interactions of the probe molecule with the surface functionalities, diamine ligand, and tertiary amine, were analyzed by FT‐IR and solid‐state ¹³C and ¹¹B MAS NMR. For the catalyst exhibiting high 1,4‐addition activity, the diamine ligand and tertiary amine base exist in closer proximity than in the catalyst with low activity.     

Synthesis of Porphyrinquinone and Doubly‐Fused Diporphyrin Quinone Through Oxidation of Diarylporphyrins Using a Hypervalent Iodine Compound

Treatment of a meso‐diarylporphyrin with PhI(OAc)₂ in the presence of BF₃ ? OEt₂ and propionic acid affords the corresponding porphyrinquinone in a high yield (91%). A novel quinone derived from meso‐meso β–β doubly‐fused diporphyrin was obtained as the sole byproduct (16% yield), which exhibits strong panchromatic absorption between 300 and 1000 nm. It has a low HOMO‐LUMO gap owing to expanded and low‐symmetry π‐planes.