Synthesis,Characterization and Solvatochromism Investigation of Mixed Ligand Chelate Copper(II) Complexes with Acetyleacetonate and Three Diamine Ligands

The syntheses of three mixed ligand chelate copper(II) complexes of the type [Cu(L)(acac)(H₂O)]BPh₄ where acac=acetyleacetonate; L=N,N‐dimethyl,N′‐benzylethane‐1,2‐diamine ( L¹ ), N,N‐dimethyl, N′‐2‐methylbenzylethane‐1,2‐diamine ( L² ) or N,N‐dimethyl,N′‐2‐chlorobenzylethane‐1,2‐diamine ( L³ ) are reported and characterized by elemental analyses, spectroscopic and molar conductance measurements. The X‐ray structure of complex 1 shows that the central copper atom is placed in a distorted square pyramidal geometry made by acac and diamine chelate in the base and a H₂O molecule on the apex. The prepared complexes are fairly soluble in a large number of organic solvents and show positive solvatochromism. Calculations of SMLR (stepwise multiple linear regression) method was utilized to find the best model explaining the observed solvatochromic behavior and showed that among different solvent parameters, donor number (DN) is a dominant factor responsible for the shift in the d‐d absorption band of the complexes to the lower wavenumber with increasing its values. The importance of substituent effect in diamine ligand on the spectral and SMLR measurements is also discussed.     

Alkane Oxidation by an Immobilized Nickel Complex Catalyst: Structural and Reactivity Differences Induced by Surface‐Ligand Density on Mesoporous Silica

Immobilized nickel catalysts SBA*‐ L ‐x/Ni ( L =bis(2‐pyridylmethyl)(1H‐1,2,3‐triazol‐4‐ylmethyl)amine) with various ligand densities ( L content (x)=0.5, 1, 2, 4 mol % Si) have been prepared from azidopropyl‐functionalized mesoporous silicas SBA‐N₃‐x. Related homogeneous ligand LtBu and its Ni^II complexes, [Ni( LtBu )(OAc)₂(H₂O)] ( LtBu /Ni) and [Ni( LtBu )₂]BF₄ (2 LtBu /Ni), have been synthesized. The L /Ni ratio (0.9–1.7:1) in SBA*‐ L ‐x/Ni suggests the formation of an inert [Ni L ₂] site on the surface at higher ligand loadings. SBA*‐ L ‐x/Ni has been applied to the catalytic oxidation of cyclohexane with m‐chloroperbenzoic acid (mCPBA). The catalyst with the lowest loading shows high activity in its initial use as the homogeneous LtBu /Ni catalyst, with some metal leaching. As the ligand loading increases, the activity and Ni leaching are suppressed. The importance of site‐density control for the development of immobilized catalysts has been demonstrated.     

Preparation of magnetic Fe3O4/P (GMA‐DVB)‐PEI/Pd highly efficient catalyst with core‐shell structure

In this paper, a simple route for palladium (Pd) nanoparticles attached to the surface of hollow magnetic Fe₃O₄/P (GMA‐DVB)‐polyethyleneimine (PEI) microspheres was established. Due to the large amount of imidogen groups and tertiary amine groups presenting in the PEI, Pd²⁺ ions could be anchored to the support by complexation with a polyfunctional organic ligand. Thereafter, a magnetic Pd catalyst having a high loading amount and good dispersibility was obtained by reducing Pd²⁺ ions. Afterwards, the prepared catalyst was characterized by TEM, SEM, FTIR, XRD, TGA, VSM, and UV–vis in detail. Ultimately, their catalytic activity was evaluated using the reduction of 4‐nitrophenol (4‐NP). Research showed that the Fe₃O₄/P (GMA‐DVB)‐PEI/Pd catalyst possessed high catalytic performances for the reduction of 4‐NP with a conversion rate of 98.43% within 540 s. Furthermore, the catalyst could be easily recovered and reused at least for nine successive cycles.     

Solid‐State NMR Characterization of Wilkinson’s Catalyst Immobilized in Mesoporous SBA‐3 Silica

The Wilkinson’s catalyst [RhCl(PPh₃)₃] has been immobilized inside the pores of amine functionalized mesoporous silica material SBA‐3 and The structure of the modified silica surface and the immobilized rhodium complex was determined by a combination of different solid‐state NMR methods. The successful modification of the silica surface was confirmed by ²⁹Si CP‐MAS NMR experiments. The presence of the T_n peaks confirms the successful functionalization of the support and shows the way of binding the organic groups to the surface of the mesopores. ³¹P‐³¹P J‐resolved 2D MAS NMR experiments were conducted in order to characterize the binding of the immobilized catalyst to the amine groups of the linkers attached to the silica surface. The pure catalyst exhibits a considerable ³¹P‐³¹P J‐coupling, well resolvable in 2D MAS NMR experiments. This J‐coupling was utilized to determine the binding mode of the catalyst to the linkers on the silica surface and the number of triphenylphosphine ligands that are replaced by coordination bonds to the amine groups. From the absence of any resolvable ³¹P‐³¹P J‐coupling in off‐magic‐angle‐spinning experiments, as well as slow‐spinning MAS experiments, it is concluded, that two triphenylphosphine ligands are replaced and that the catalyst is bonded to the silica surface through two linker molecules.     

α‐Diamine Nickel Catalysts with Nonplanar Chelate Rings for Ethylene Polymerization

A series of novel α‐diamine nickel complexes, (ArNH‐C(Me)‐(Me)C‐NHAr)NiBr₂, 1 : Ar=2,6‐diisopropylphenyl, 2 : Ar=2,6‐dimethylphenyl, 3 : Ar=phenyl), have been synthesized and characterized. X‐ray crystallographic analysis showed that the coordination geometry of the α‐diamine nickel complexes is markedly different from conventional α‐diimine nickel complexes, and that the chelate ring (N‐C‐C‐N‐Ni) of the α‐diamine nickel complex is significantly distorted. The α‐diamine nickel catalysts also display different steric effects on ethylene polymerization in comparison to the α‐diimine nickel catalyst. Increasing the steric hindrance of the α‐diamine ligand by substitution of the o‐methyl groups with o‐isopropyl groups leads to decreased polymerization activity and molecular weight; however, catalyst thermal stability is significantly enhanced. Living polymerizations of ethylene can be successfully achieved using 1 /Et₂AlCl at 35 °C or 2 /Et₂AlCl at 0 °C. The bulky α‐diamine nickel catalyst 1 with isopropyl substituents can additionally be used to control the branching topology of the obtained polyethylene at the same level of branching density by tuning the reaction temperature and ethylene pressure.     

Triazole‐based ligands functionalized silica: Effects of ligand denticity and donors on catalytic oxidation activity of Pd nanoparticles

Triazole‐based ligands, tris (triazolyl)methanol (Htbtm), bis (triazolyl)‐phenylmethanol (Hbtm), and phenyl (pyridin‐2‐yl)(triazolyl)methanol (Hpytm), with differences in ligand denticity (i.e., bidentate and tridentate) and type of N donors (i.e., triazole and pyridine) were functionalized onto a silica support to produce the corresponding SiO₂‐ L ( L  = tbtm, btm, pytm). Subsequent reactions with Pd (CH₃COO)₂ in CH₂Cl₂ yielded Pd/SiO₂‐ L . ICP‐MS reveals that Pd loadings are higher with increased N loadings, resulting in the following trend: Pd/SiO₂‐tbtm (0.83 mmol Pd g^?1) > Pd/SiO₂‐btm (0.65 mmol Pd g^?1) ~ Pd/SiO₂‐pytm (0.63 mmol Pd g^?1). Meanwhile, TEM images of the used Pd/SiO₂‐ L catalysts after the first catalytic cycle show that the mean size of Pd NPs is highest with Pd/SiO₂‐pytm (8.5 ± 1.5 nm), followed by Pd/SiO₂‐tbtm (6.4 ± 1.6 nm) and Pd/SiO₂‐btm (4.8 ± 1.3 nm). Based on TONs, catalytic studies toward aerobic oxidation of benzyl alcohol to benzaldehyde at 60 °C in EtOH showed that Pd/SiO₂‐pytm possessed the most active surface Pd(0) atoms, most likely as a result of more labile properties of the pyridine–triazole ligand compared to tris‐ and bis (triazolyl) analogs. ICP‐MS and TEM analysis of Pd/SiO₂‐btm indicate minimal Pd leaching and similar average Pd NPs sizes after 1^st and 5^th catalytic runs, respectively, confirming that SiO₂‐btm is an efficient Pd NPs stabilizer. The Pd/SiO₂‐btm catalyst was also active toward aerobic oxidation of various benzyl alcohol derivatives in EtOH and could be reused for at least 7 reaction cycles without a significant activity loss.     

A “Mitsubishi emblem” tetrauclear aluminum complex containing two unsymmetric N2O2‐ligands and a symmetric NO3‐ligand as initiator for polymerization of rac‐lactide

A novel hydroxy‐, methoxy‐, and phenoxy‐bridge “Mitsubishi emblem” tetranuclear aluminum complex ( 1 ) is synthesized from an unsymmetric amine‐pyridine‐bis(phenol) N₂O₂‐ligand (H₂L¹) and a symmetric amine‐tris(phenol) NO₃‐ligand (H₂L²). Two same configuration chiral nitrogen atoms are formed in the tetranuclear Al complex upon coordination of the unsymmetric tertiary amine ligand to central Al. Complex 1 initiates controlled ring‐opening polymerization (ROP) of rac‐lactide and afford polylactide (PLA) with narrow molecular weight distributions (M_w/M_n = 1.05–1.19). The analysis of ¹H NMR spectra of the oligomer indicates that the methoxy group is the initiating group and the ring‐opening polymerization of lactide follows a coordination‐insertion mechanism. The Homonuclear decoupled ¹H NMR spectroscopy suggests the isotactic‐rich chains is preferentially formed in PLA. The study on kinetics of the ROP of lactide reveals the homopropagation rate is higher than the cross‐propagation rate, which is in agreement with the observed isotactic selectivity in the ROP of rac‐lactide. The stereochemistry of the polymerization was also supported by activation parameters. The introduction of unsymmetric ligand H₂L¹ has an effect on stereoslectivity of polymerization. This result may be of interest for the design of multinuclear metal complex catalysts containing functionalized ligands. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2084–2091     

Amelioration of H4[W12SiO40] by nanomagnetic heterogenization: For the synthesis of 1H–pyrazolo[1,2‐b]phthalazinedione derivatives

We conveniently coated silicotungstic acid (STA, H₄[W₁₂SiO₄₀]) on amino‐functionalized Si–magnetite nanoparticles, as surface functionalization of magnetic nanoparticles is an excellent way for green and efficient catalysis. The nanoparticles were structurally characterized using various techniques. The catalytic activity and recyclability of the STA–amine–Si–magnetite nanoparticles were probed through synthesis of 1H–pyrazolo[1,2‐b]phthalazinedione derivatives. The reaction proceeds smoothly to provide products in excellent yields and short reaction times. The catalyst could be readily recovered using a simple external magnet and reused several times without any significant loss in activity. Herein, we report a comparison of the activity of H₄[W₁₂SiO₄₀] as a homogeneous and heterogeneous catalyst, the latter being found to be more efficient. The findings offer effective methods for environmentally friendly synthesis of pyrazolo[1,2‐b]phthalazinedione derivatives.     

Alkyne Metathesis with Silica‐Supported and Molecular Catalysts at Parts‐per‐Million Loadings

Improvement of the activity, stability, and chemoselectivity of alkyne‐metathesis catalysts is necessary before this promising methodology can become a routine method to construct C≡C triple bonds. Herein, we show that grafting of the known molecular catalyst [MesC≡Mo(OtBu_F6)₃] ( 1 , Mes=2,4,6‐trimethylphenyl, OtBu_F6=hexafluoro‐tert‐butoxy) onto partially dehydroxylated silica gave a well‐defined silica‐supported active alkyne‐metathesis catalyst [(≡SiO)Mo(≡CMes)(OtBu_F6)₂] ( 1 /SiO_2‐700). Both 1 and 1 /SiO_2‐700 showed very high activity, selectivity, and stability in the self‐metathesis of a variety of carefully purified alkynes, even at parts‐per‐million catalyst loadings. Remarkably, the lower turnover frequencies observed for 1 /SiO_2‐700 by comparison to 1 do not prevent the achievement of high turnover numbers. We attribute the lower reactivity of 1 /SiO_2‐700 to the rigidity of the surface Mo species owing to the strong interaction of the metal site with the silica surface.     

Polymer‐Supported Enantioselective Bifunctional Catalysts for Nitro‐Michael Addition of Ketones and Aldehydes

Introduction of an L ‐amino acid as a spacer and a urea‐forming moiety in a polymer‐supported bifunctional urea–primary amine catalyst, based on (1R, 2R)‐(+)‐1,2‐diphenylethylenediamine, significantly improves the catalyst’s activity and stereoselectivity in the asymmetric addition of ketones and aldehydes to nitroolefins. Yields and enantioselectivities, unprecedented for immobilized catalysts, were obtained with such challenging donors as acetone, cyclopentanone, and α,α‐disubstituted aldehydes, which usually perform inadequately in this reaction (particularly when a secondary‐amine‐based catalyst is used). Remarkably, though in the examined catalysts the D ‐amino acids as spacers were significantly inferior to the L isomers, for the chosen configuration of the diamine (match–mismatch pairs) the size of the side chain of the amino acid hardly influenced the enantioselectivity of the catalyst. These results, combined with the reactivity profile of the catalysts with substrates bearing two electron‐withdrawing groups and the behavior of the catalysts’ analogues based on tertiary (rather than primary) amine, suggest an enamine‐involving addition mechanism and a particular ordered C? C bond‐forming transition state as being responsible for the catalytic reactions with high enantioselectivity.     

Kinetics and mechanism of tertiary amine‐catalyzed cleavage of N′‐morpholino‐N‐(2′‐methoxyphenyl)phthalamide: Kinetic evidence for the presence of a reactive intermediate on the reaction path

Pseudo‐first‐order rate constants (k_obs) for tertiary amine (DABCO and Me₃N) buffer‐catalyzed cyclization of N′‐morpholino‐N‐(2′‐methoxyphenyl)phthalamide ( 1 ) to N‐(2′‐methoxyphenyl)phthalimide ( 2 ) reveal saturation (nonlinear) plots of k_obs versus [Buf]_T (total tertiary amine buffer concentration) at a constant pH. Such plots at different pH have been attributed to the presence of a reactive intermediate (T^?) formed by tertiary amine buffer‐catalyzed intramolecular nucleophilic addition of the secondary amide nitrogen to the carbonyl carbon of the tertiary amide group of 1 . © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 263–272, 2010     

Organic Thin Film Transistors Based on 2,3‐Dimethylpentacene and 2,3‐Dimethyltetracene

2,3‐Dimethylpentacene (DMP) and 2,3‐dimethyltetracene (DMT) were synthesized, characterized and employed as the channel material in the fabrication of thin‐film transistors. The two methyl groups increase the chemical stability of the compounds versus the pristine acene analogues. The crystals maintain herringbone‐like molecular packing, whereas the weak dipole associated with the unsymmetrical molecule induces an anti‐parallel alignment among the neighbors. This structural motif favors layered film growth on SiO₂/Si surface. Thin film transistors prepared on SiO₂/Si and n‐nonyltrichlorosilane‐modified SiO₂/Si at different substrate temperatures were compared. DMP‐based transistors prepared on rubbed n‐nonyltrichlorosilane‐modified SiO₂/Si substrate gave the highest field‐effect mobility of 0.46 cm²/Vs, whereas DMT‐based transistor gave a mobility of 0.028 cm²/Vs.     

Synthesis,Structure, and Highly Efficient Copper‐Catalyzed Aziridination with a Tetraaza‐Bispidine Ligand

The distorted trigonal‐bipyramidal Cu^II complex [Cu(L¹)(NCCH₃)]²⁺ of the novel tetradentate bispidine‐derived ligand L¹ with four tertiary amine donors (L¹=1,5‐diphenyl‐3‐methyl‐7‐(1,4,6‐trimethyl‐1,4‐diazacycloheptane‐6‐yl)diazabicyclo[3.3.1]nonane‐9‐one) is a very efficient catalyst for the aziridination of olefins in the presence of a nitrene source. In agreement with the experimental data (in situ spectroscopy, product distribution, and its dependence on the geometry of the substrate and of the nitrene source), a theoretical analysis based on DFT calculations indicates that the active catalyst has the Cu center in its +II oxidation state, that electron transfer is not involved, and that the conversion of the olefin to an aziridine is a stepwise process involving a radical intermediate. The striking change of efficiency and reaction mechanism between classical copper–bispidine complexes and the novel L¹‐based catalyst is primarily attributed to the structural variation, enforced by the ligand architecture.     

π–π Dimerization of a mono(pyridyl–imine) platinum(II) chelate

The cation of the title complex salt, chlorido{2,2‐dimethyl‐N‐[(E)‐1‐(pyridin‐2‐yl)ethylidene]propane‐1,3‐diamine}platinum(II) tetrafluoridoborate, [PtCl(C₁₂H₁₉N₃)]BF₄, exhibits a nominally square‐planar Pt^II ion coordinated to a chloride ion [Pt—Cl = 2.3046 (9) Å] and three unique N‐atom types, viz. pyridine, imine and amine, of the tridentate Schiff base ligand formed by the 1:1 condensation of 1‐(pyridin‐2‐yl)ethanone and 2,2‐dimethylpropane‐1,3‐diamine. The cations are π‐stacked in inversion‐related pairs (dimers), with a mean plane separation of 3.426 Å, an intradimer Pt...Pt separation of 5.0785 (6) Å and a lateral shift of 3.676 Å. The centroid (Cg) of the pyridine ring is positioned approximately over the Pt^II ion of the neighbouring cation (Pt...Cg = 3.503 Å).     

Preparation of Nanostructural ZrO2/SiO2 and Study on Catalytic Activity of its Superacid Catalyst

A novel material ZrO₂/SiO₂ was synthesized on SiO₂ support by means of electrostatic self‐assembly technique and sol‐gel method. After treating this material with 0.7 mol·L^?1 H₂SO₄, a nanostructural solid superacid catalyst SO₄^2?‐ZrO₂/SiO₂ was prepared. The material was characterized by Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), Brunauer Emmett Teller method (BET) and Hammett indicator method. The catalytic activity of the catalyst was carried out for the esterification between acetic acid and butanol. Results show that the catalytic activity of this catalyst was much higher than that of powdered superacid catalyst SO₄^2?/ZrO₂. Due to the SiO₂ spherical support, the solid superacid catalyst could be separated and recovered easily. The nanostructural ZrO₂/SiO₂ will be a promising material for the chemical industry in the future.     

Cyclohexane dehydrogenation on a copper-platinum catalyst

The reaction of the dehydrogenation of cyclohexane on a copper-platinum catalyst supported by silica gel (1 wt % Pt + 0.15 wt % Cu)/SiO₂ was studied. The state of the catalyst surface was investigated using X-ray photoelectron spectroscopy. It was established that under both flow and static conditions, the activity of the copper-platinum catalyst is higher than the activity of a catalyst containing 1 wt % Pt/SiO₂. The rise in activity as a result of the introduction of copper, due to a decrease in the activation energy, is explained by an increase in the fraction of carbon in the composition of active centers localized on particles of neutral (Pt _m ⁰) and positively charged (Pt _n ^+δ) platinum, and by the formation of centers with increased activity as a result of the adsorption of Cu^+δ on particles of Pt _m ⁰. It was demonstrated that treating the copper-platinum catalyst with the plasma of a glow discharge in argon and oxygen increases its activity, while treatment in high-frequency H₂ plasma reduces it. The indicated changes in the activity are associated with the alteration of the activation energies and the number of active centers, revealed by X-ray photoelectron spectroscopy, that depend on changes in the catalyst surface composition.     

Complexation of rhodium(II) tetracarboxylates with aliphatic diamines in solution: 1H and 13C NMR and DFT investigations

The complexation of rhodium(II) tetraacetate, tetrakistrifluoroaceate and tetrakisoctanoate with a set of diamines (ethane‐1,diamine, propane‐1,3‐diamine and nonane‐1,9‐diamine) and their N,N′‐dimethyl and N,N,N′,N′‐tetramethyl derivatives in chloroform solution has been investigated by ¹H and ¹³C NMR spectroscopy and density functional theory (DFT) modelling. A combination of two bifunctional reagents, diamines and rhodium(II) tetracarboxylates, yielded insoluble coordination polymers as main products of complexation and various adducts in the solution, being in equilibrium with insoluble material. All diamines initially formed the 2 : 1 (blue), (1 : 1)_n oligomeric (red) and 1 : 2 (red) axial adducts in solution, depending on the reagents' molar ratio. Adducts of primary and secondary diamines decomposed in the presence of ligand excess, the former via unstable equatorial complexes. The complexation of secondary diamines slowed down the inversion at nitrogen atoms in NH(CH₃) functional groups and resulted in the formation of nitrogenous stereogenic centres, detectable by NMR. Axial adducts of tertiary diamines appeared to be relatively stable. The presence of long aliphatic chains in molecules (adducts of nonane‐1,9‐diamines or rhodium(II) tetrakisoctanoate) increased adduct solubility. Hypothetical structures of the equatorial adduct of rhodium(II) tetraacetate with ethane‐1,2‐diamine and their NMR parameters were explored by means of DFT calculations. Copyright © 2013 John Wiley & Sons, Ltd.     

σ‐Insertive Mechanism versus Concerted Non‐insertive Mechanism in the Intramolecular Hydroamination of Aminoalkenes Catalyzed by Phenoxyamine Magnesium Complexes: A Synthetic and Computational Study

The phenoxyamine magnesium complexes [{ONN}MgCH₂Ph] ( 4 a : {ONN}=2,4‐tBu₂‐6‐(CH₂NMeCH₂CH₂NMe₂)C₆H₂O^?; 4 b : {ONN}=4‐tBu‐2‐(CH₂NMeCH₂CH₂NMe₂)‐6‐(SiPh₃)C₆H₂O^?) have been prepared and investigated with respect to their catalytic activity in the intramolecular hydroamination of aminoalkenes. The sterically more shielded triphenylsilyl‐substituted complex 4 b exhibits better thermal stability and higher catalytic activity. Kinetic investigations using complex 4 b in the cyclisation of 1‐allylcyclohexyl)methylamine ( 5 b ), respectively, 2,2‐dimethylpent‐4‐en‐1‐amine ( 5 c ), reveal a first‐order rate dependence on substrate and catalyst concentration. A significant primary kinetic isotope effect of 3.9±0.2 in the cyclisation of 5 b suggests significant N?H bond disruption in the rate‐determining transition state. The stoichiometric reaction of 4 b with 5 c revealed that at least two substrate molecules are required per magnesium centre to facilitate cyclisation. The reaction mechanism was further scrutinized computationally by examination of two rivalling mechanistic pathways. One scenario involves a coordinated amine molecule assisting in a concerted non‐insertive N?C ring closure with concurrent amino proton transfer from the amine onto the olefin, effectively combining the insertion and protonolysis step to a single step. The alternative mechanistic scenario involves a reversible olefin insertion step followed by rate‐determining protonolysis. DFT reveals that a proton‐assisted concerted N?C/C?H bond‐forming pathway is energetically prohibitive in comparison to the kinetically less demanding σ‐insertive pathway (ΔΔG^≠=5.6 kcal mol^?1). Thus, the σ‐insertive pathway is likely traversed exclusively. The DFT predicted total barrier of 23.1 kcal mol^?1 (relative to the {ONN}Mg pyrrolide catalyst resting state) for magnesium?alkyl bond aminolysis matches the experimentally determined Eyring parameter (ΔG^≠=24.1(±0.6) kcal mol^?1 (298 K)) gratifyingly well.     

Oxygenation of sulfides catalysed by SBA‐15‐immobilized molybdenum(VI) complex of a bis(phenol) diamine ligand using aqueous hydrogen peroxide as a green oxidant

A highly efficient and reusable molybdenum‐based catalyst has been synthesized by covalent grafting of a bis(phenol) diamine ligand, namely 2‐(((2‐bromoethyl)(2‐((3,5‐di‐tert‐butyl‐2‐hydroxybenzyl)amino)ethyl)amino)methyl)‐4,6‐di‐tert‐butylphenol, onto functionalized ordered mesoporous silica (SBA‐15) followed by complexation with MoO₂(acac)₂. The resulting organic–inorganic hybrid material was found to be a highly effective catalyst for oxygenation of various sulfides to their corresponding sulfoxides or sulfones. The catalyst was characterized using transmission and scanning electron microscopies, X‐ray photoelectron, Fourier transform infrared and atomic absorption spectroscopies, Brunauer–Emmett–Teller surface area analysis and thermogravimetric analysis. Mild reaction conditions, high selectivity and easy recovery and reusability of the catalyst render the presented protocol very useful for addressing industrial needs and environmental concerns.     

System with Potential Dual Modes of Metal–Ligand Cooperation: Highly Catalytically Active Pyridine‐Based PNNH–Ru Pincer Complexes

Metal–ligand cooperation (MLC) plays an important role in catalysis. Systems reported so far are generally based on a single mode of MLC. We report here a system with potential for MLC by both amine–amide and aromatization–dearomatization ligand transformations, based on a new class of phosphino–pyridyl ruthenium pincer complexes, bearing sec‐amine coordination. These pincer complexes are effective catalysts under unprecedented mild conditions for acceptorless dehydrogenative coupling of alcohols to esters at 35 °C and hydrogenation of esters at room temperature and 5 atm H₂. The likely actual catalyst, a novel, crystallographically characterized monoanionic de‐aromatized enamido–Ru^II complex, was obtained by deprotonation of both the N?H and the methylene proton of the N‐arm of the pincer ligand.