Development of a Chitosan/Nickel Phthalocyanine Composite Based Conductometric Micro-sensor for Methanol Detection

Thin-film composite of chitosan/nickel phthalocyanine (NiPc) was electrochemically deposited on the fingers of interdigitated gold electrodes, applying chronoamperometric polymerization technique. The presence of crystallized NiPc in the chitosan was confirmed by EDX and FTIR analysis. Acetone, ethanol, and methanol gas-sensing properties of the films prepared at optimum conditions were studied at atmospheric temperature, through differential measurements at an optimized frequency of 10 kHz, using a lock-in amplifier. The conductometric sensor presents the highest sensitivity of 60.2 μS.cm⁻¹(v/v) for methanol and 700 ppm as the limit of detection. For validation, the methanol content of a commercial rubbing alcohol was determined.     

Unsupervised Pattern Recognition Chemometrics for Distinguishing Different Egyptian Olive Varieties Using a New Integrated Densitometric Reversed-Phase High-Performance Thin-Layer Chromatography—Image Analysis Technique

JPC – Journal of Planar Chromatography – Modern TLC - The merits of chemometrics in categorizing different Egyptian olive chemovarieties based on their compositional integrity were...     

Modules over cluster-tilted algebras that do not lie on local slices

We characterize the indecomposable transjective modules over an arbitrary cluster-tilted algebra that do not lie on a local slice, and we provide a sharp upper bound for the number of (isoclasses of) these modules.     

Synthesis,spectral, DFT calculations and biological studies of solvatochromic copper(II)-ONS hydrazone derived from 2-aminochromone-3-carboxaldehyde

New ONS hydrazone ligand, 2-[(2-aminochromon-3-yl)methylidene]-N-phenylhydrazinecarbothioamide, HL , was synthesized and reacted with different salts of Cu (II) ion (OAc⁻, NO₃⁻, SO₄²⁻ and Cl⁻) in absence and presence of secondary ligands (L′); 8-hydroxyquinoline, 1,10-phenanthroline or SCN⁻; to form binary and ternary Cu(II)-chelates. The ligand and its Cu(II)-complexes were fully characterized by analytical, spectral, thermal, conductivity and magnetic susceptibility measurements. The metal chelates showed octahedral, square planar and /or distorted tetraherdal arrangements. Coats–Redfern equations used to calculate the kinetic parameters of the thermal decomposition stages (E_a, A, ΔH, ΔS and ΔG). The compounds exhibit luminescence property; promising interesting potential applications as photoactive materials. Lippert–Mataga, Bakhshiev, Kawski–Chamma–Viallet and microscopic solvent polarity parameter and E_T^N correlation methods were applied on the solvatochromic shifts of emission spectra to evaluate the ground (μ_g) and excited (μ_e) states dipole moments. Excited state dipole moment is larger than the ground state which may be attributed to π-π* transition. The coordinating anions play an important role on the position and intensity of emission band. The ligand and its metal complexes showed antimicrobial activity towards Gram–positive bacteria, Gram–negative bacteria, yeast and fungus. The molecular structural parameters of HL and its Cu(II)- complexes have been calculated on the basis of DFT engaged in the Gaussian 09 program at the B3LYP/6-31G(d,p) level; the theoretical data are correlated with the experimental data.     

Surface modification of polycarbonate urethane by grafting polyethylene glycol and bivalirudin drug for improving hemocompatibility

As the clinical demand for blood-contacting materials increases, higher requirements are placed on their physicochemical properties, durability and hemocompatibility in vivo. In this work, a multiple functionalized material was developed through a facile modification process. Herein, polycarbonate urethane (PCU) surface was co-modified with polyethylene glycol (PEG) and bivalirudin (BVLD). PCU provides excellent physical and mechanical properties, PEG and BVLD, especially BVLD, enable the surface with outstanding anticoagulant capacity. Specifically, PCU surface was first treated with hexamethylene diisocyanate to introduce active isocyanate groups onto the surface, followed by hydroxy-PEG grafting to improve the hydrophilicity. Finally, BVLD was immobilized on the surface via Michael addition reaction to improve antithrombotic properties. Attenuated total reflection Fourier transforms infrared spectroscopy and UV spectrophotometers were used to confirm the modified surfaces. The hydrophilicity was characterized by static water contact angle measurement, the morphology of the modified surfaces was observed by scanning electron microscopy. Blood compatibility of the modified surfaces was characterized by the hemolysis rate, platelet adhesion assay and cell culture test. The results showed that the BVLD immobilized surface has excellent anticoagulant properties, good fibrin-bound thrombin inhibition, and good resistance against non-specific adhesion of proteins. Hence, the co-modification with PEG and BVLD was proved an encouraging strategy for improving hemocompatibility.     

Metal-Free Arylation of Benzothiophenes at C4 by Activation as their Benzothiophene S-Oxides

Benzothiophenes, activated by oxidation to the corresponding S-oxides, undergo C−H/C−H-type coupling with phenols to give C4 arylation products. While an electron-withdrawing group at C3 of the benzothiophene is important, the process operates without a directing group and a metal catalyst, thus rendering it compatible with sensitive functionalities—e.g. halides and formyl groups. Quantum chemical calculations suggest a formal stepwise mechanism involving heterolytic cleavage of an aryloxysulfur species to give a π-complex of the corresponding benzothiophene and a phenoxonium cation. Subsequent addition of the phenoxonium cation to the C4 position of the benzothiophene is favored over the addition to C3; Fukui functions predict that the major regioisomer is formed at the more electron-rich position between C3 and C4. Varied selective manipulation of the benzothiophene products showcase the synthetic utility of the metal-free arylation process.     

Oxymatrine Loaded Cross-Linked PVA Nanofibrous Scaffold: Design and Characterization and Anticancer Properties

This study focuses on the fabrication, characterization and anticancer properties of biocompatible and biodegradable composite nanofibers consisting of poly(vinyl alcohol) (PVA), oxymatrine (OM), and citric acid (CA) using a facile and high-yield centrifugal spinning process known as Forcespinning. The effects of varying concentrations of OM and CA on fiber diameter and molecular cross-linking are investigated. The morphological and thermo-physical properties, as well as water absorption of the developed nanofiber-based mats are characterized using microscopical analysis, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. In vitro anticancer studies are conducted with HCT116 colorectal cancer cells. Results show a high yield of long fibers embedded with beads. Fiber average diameters range between 462 and 528 nm depending on OM concentration. The thermal analysis results show that the fibers are stable at room temperature. The anticancer study reveals that PVA nanofiber membrane with high concentrations of OM can suppress the proliferation of HCT116 colorectal cancer cells. The study provides a comprehensive investigation of OM embedded into nanosized PVA fibers and the prospective application of these membranes as a drug delivery system.