Vacuum‐driven fluid manipulation by a piezoelectric diaphragm micropump for microfluidic droplet generation with a rapid system response time

Recently, we developed a convenient microfluidic droplet generation device based on vacuum‐driven fluid manipulation with a piezoelectric diaphragm micropump. In the present study built on our previous work, we investigate the influence of settings applied to the piezoelectric pump, such as peak‐to‐peak drive voltage (V_p‐p) and wave frequency, on droplet generation characteristics. Stepwise adjustments to the drive voltage in ±10‐V_p‐p increments over the range of 200?250 V_p‐p during droplet creation revealed that the droplet generation rate could be reproducibly controlled at a specific drive voltage. The droplet generation rate switched within <0.5 s after the input of a new voltage. Although the droplet generation rate depended on the drive voltage, this setting had almost no influence on droplet size. The frequency over the selected range (50?60 Hz) did not markedly influence the droplet generation rate or droplet size. We show that the current fluid manipulation system can be conveniently used for both droplet generation and for rapid droplet reading, which is required in many microfluidic‐based applications.     

Shimalactone Biosynthesis Involves Spontaneous Double Bicyclo-Ring Formation with 8π-6π Electrocyclization

Shimalactones A and B are neuritogenic polyketides possessing characteristic oxabicyclo[2.2.1]heptane and bicyclo[4.2.0]octadiene ring systems that are produced by the marine fungus Emericella variecolor GF10. We identified a candidate biosynthetic gene cluster and conducted heterologous expression analysis. Expression of ShmA polyketide synthase in Aspergillus oryzae resulted in the production of preshimalactone. Aspergillus oryzae and Saccharomyces cerevisiae transformants expressing ShmA and ShmB produced shimalactones A and B, thus suggesting that the double bicyclo-ring formation reactions proceed non-enzymatically from preshimalactone epoxide. DFT calculations strongly support the idea that oxabicyclo-ring formation and 8π-6π electrocyclization proceed spontaneously after opening of the preshimalactone epoxide ring through protonation. We confirmed the formation of preshimalactone epoxide in vitro, followed by its non-enzymatic conversion to shimalactones in the dark.     

Asymptotic behavior toward nonlinear waves for radially symmetric solutions of the multi-dimensional Burgers equation

The present paper is concerned with the asymptotic behaviors of radially symmetric solutions for the multi-dimensional Burgers equation on the exterior domain in ${\mathbb{R}}^n,n\ge 3$, where the boundary and far field conditions are prescribed. We show that in some case where the corresponding 1-D Riemann problem for the non-viscous part admits a shock wave, the solution tends toward a linear superposition of stationary and rarefaction waves as time goes to infinity, and also show the decay rate estimates. Furthermore, we improve the results on the asymptotic stability of the stationary waves which are treated in the previous papers [2], [3]. Finally, for the case of $n=3$, we give the complete classification of the asymptotic behaviors, which includes even a linear superposition of stationary and viscous shock waves.     

Recyclable carbon fiber‐reinforced plastics (CFRP) containing degradable acetal linkages: Synthesis,properties, and chemical recycling

Two epoxy resins containing degradable acetal linkages were synthesized by the reaction of cresol novolak‐type phenolic resin (CN) with vinyl ethers containing a glycidyl group [cyclohexane dimethanol vinyl glycidyl ether (CHDMVG) and 4‐vinyloxybutyl glycidyl ether (VBGE). Carbon fiber‐reinforced plastics (CFRPs) were prepared by heating laminated prepreg sheets with CN‐CHDMVG resin (derived from CN and CHDMVG) and CN‐VBGE resin (derived from CN and VBGE), in which carbon fibers are impregnated with epoxy resins containing curing agents [dicyandiamide (DICY)] and curing accelerator [3‐(3,4‐dichlorophenyl)‐1,1‐dimethylurea (DCMU)]. CN‐CHDMVG‐based CFRPs and CN‐VBGE‐based CFRPs exhibited almost the same tensile strength as the conventional bisphenol‐A‐based CFRPs. CN‐CHDMVG‐based CFRPs and CN‐VBGE‐based CFRPs underwent smooth breakdown with the treatment of hydrochloric acid in tetrahydrofuran at room temperature for 24 h to regenerate strands of carbon fibers. The surface conditions of the recovered carbon fibers had little changes during degradation and recovery processes on the basis of scanning electron microscopy (SEM) and X‐ray photoelectron spectroscopy (XPS). The recovered carbon fibers exhibited almost the same tensile strength as virgin carbon fibers and hence would be reused for the production of CFRPs. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1052–1059     

D3h‐Symmetric Porphyrin‐Based Rigid Macrocyclic Ligands for Multicofacial Multinuclear Complexes in a One‐Nanometer‐Sized Cavity

The one‐step synthesis of D_3h‐symmetric cyclic porphyrin trimers 1 composed of three 2,2′‐[4,4′‐bis(methoxycarbonyl)]bipyridyl moieties and three porphyrinatozinc moieties was achieved from a nickel‐mediated reductive coupling of meso‐5,15‐bis(6‐chloro‐4‐methoxycarbonylpyrid‐2‐yl)porphyrinatozinc. Although cyclic trimers 1 were obtained as a mixture that included other cyclic and acyclic porphyrin oligomers, an extremely specific separation was observed only for cyclic trimers 1 when using columns of silica gel modified with pyrenylethyl, cyanopropyl, and other groups. Structural analysis of cyclic trimers 1 was carried out by means of NMR spectroscopy and X‐ray crystallography. Treatment of an η³‐allylpalladium complex with a cyclic trimer gave a tris(palladium) complex containing three η³‐allylpalladium groups inside the space, which indicated that the bipyridyl moieties inside the ring could work as bidentate metalloligands.     

Star-Shaped Ruthenium Complexes as Prototypes of Molecular Gears

The design and synthesis of two families of molecular-gear prototypes is reported, with the aim of assembling them into trains of gears on a surface and ultimately achieving controlled intermolecular gearing motion. These piano-stool ruthenium complexes incorporate a hydrotris(indazolyl)borate moiety as tripodal rotation axle and a pentaarylcyclopentadienyl ligand as star-shaped cogwheel, equipped with five teeth ranging from pseudo-1D aryl groups to large planar 2D paddles. A divergent synthetic approach was followed, starting from a pentakis(p-bromophenyl)cyclopentadienyl ruthenium(II) complex as key precursor or from its iodinated counterpart, obtained by copper-catalyzed aromatic Br/I exchange. Subsequent fivefold cross-coupling reactions with various partners allowed high structural diversity to be reached and yielded molecular-gear prototypes with aryl-, carbazole-, BODIPY- and porphyrin-derived teeth of increasing size and length.     

Interaction between the end groups and the main chain of conjugated polymers by time-resolved EPR and fluorescence spectroscopy

ABSTRACT

Interaction between a zinc porphyrin (ZnPor) as the end-group and poly(9,9-di-n-octylfluorene-2,7-vinylene) (PFV) as the main chain in a porphyrin end-modified fluorescent conjugated polymer, ZnPFV, was studied by time-resolved electron paramagnetic resonance (EPR) and fluorescence spectroscopy. While fluorescence from the PFV part of ZnPFV showed a spectral profile almost identical to that of a PFV oligomer without end-modification, the emission spectrum of the ZnPor part exhibited a much broader profile compared to that of the reference zinc porphyrin monomer. Based on the analysis of lifetimes and quantum yields, it was found that radiative rate constant of the ZnPor part was enhanced by nearly three times. The observed unusual enhancement in the radiative rate constant was rationalised in terms of a partial π-conjugation between the end group and the main chain, as a result of co-planarisation in fluid solution. On the other hand, the time-resolved EPR spectrum of ZnPFV at 100?K basically showed a similar spectral pattern to that of the reference zinc porphyrin, but with significant differences in zero-field spitting parameters and initial population ratios. The π-system of the excited triplet state is deduced to deviate from D_4h symmetry in the end zinc porphyrin groups. The obtained results show that interaction of the porphyrin end group with the main chain of the polymer significantly influences the excited singlet state properties of the porphyrin, while its triplet state properties were affected to a lesser extent.     

On Default Priors for Robust Bayesian Estimation with Divergences

This paper presents objective priors for robust Bayesian estimation against outliers based on divergences. The minimum γ-divergence estimator is well-known to work well in estimation against heavy contamination. The robust Bayesian methods by using quasi-posterior distributions based on divergences have been also proposed in recent years. In the objective Bayesian framework, the selection of default prior distributions under such quasi-posterior distributions is an important problem. In this study, we provide some properties of reference and moment matching priors under the quasi-posterior distribution based on the γ-divergence. In particular, we show that the proposed priors are approximately robust under the condition on the contamination distribution without assuming any conditions on the contamination ratio. Some simulation studies are also presented.     

One-Step Synthesis of Cyclobutene-Annulated Fullerenes through a Cascade Reaction

The physicochemical properties of fullerene-based materials typically vary depending on the type and mode of addition of functional groups; therefore, developing fullerene derivatives with novel structures is imperative for further progress in materials science. In this study, we develop an efficient one-step strategy for synthesizing cyclobutene-annulated fullerene derivatives (cyclobutenofullerenes) and characterize their electronic properties. Despite the steric strain, cyclobutenofullerenes can be easily prepared via a one-step reaction of C₆₀ with a secondary propargylic phosphate. Structural analysis of the reaction intermediates suggests that the cascade reaction proceeds through a formal [2+2] cycloaddition of C₆₀ with an allene, caused by the 1,3-migration of the propargylic phosphate, followed by an additional 1,3-migration and the subsequent 1,2-elimination of the phosphodiester moiety.