Naphthalimide‐phthalimide derivative based photoinitiating systems for polymerization reactions under blue lights

Naphthalimide‐phthalimide derivatives (NDPDs) have been synthesized and combined with an iodonium salt, N‐vinylcarbazole, amine or 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine to produce reactive species (i.e., radicals and cations). These generated reactive species are capable of initiating the cationic polymerization of epoxides and/or the radical polymerization of acrylates upon exposure to very soft polychromatic visible lights or blue lights. Compared with the well‐known camphorquinone based systems used as references, the novel NDPD based combinations employed here demonstrate clearly higher efficiencies for the cationic polymerization of epoxides under air as well as the radical polymerization of acrylates. Remarkably, one of the NDPDs (i.e., NDPD2) based systems is characterized by an outstanding reactivity. The structure/reactivity/efficiency relationships of the investigated NDPDs were studied by fluorescence, cyclic voltammetry, laser flash photolysis, electron spin resonance spin trapping, and steady state photolysis techniques. The key parameters for their reactivity are provided. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 665–674     

Excited-State Dynamics of Thienoguanosine,an Isomorphic Highly Fluorescent Analogue of Guanosine

Thienoguanosine (^thG) is an isomorphic analogue of guanosine with promising potentialities as fluorescent DNA label. As a free probe in protic solvents, ^thG exists in two tautomeric forms, identified as the H1, being the only one observed in nonprotic solvents, and H3 keto–amino tautomers. We herein investigate the photophysics of ^thG in solvents of different polarity, from water to dioxane, by combining time-resolved fluorescence with PCM/TD-DFT and CASSCF calculations. Fluorescence lifetimes of 14.5–20.5 and 7–13 ns were observed for the H1 and H3 tautomers, respectively, in the tested solvents. In methanol and ethanol, an additional fluorescent decay lifetime (≈3 ns) at the blue emission side (λ≈430 nm) as well as a 0.5 ns component with negative amplitude at the red edge of the spectrum, typical of an excited-state reaction, were observed. Our computational analysis explains the solvent effects observed on the tautomeric equilibrium. The main radiative and nonradiative deactivation routes have been mapped by PCM/TD-DFT calculations in solution and CASSCF in the gas phase. The most easily accessible conical intersection, involving an out-of plane motion of the sulfur atom in the five-membered ring of ^thG, is separated by a sizeable energy barrier (≥0.4 eV) from the minimum of the spectroscopic state, which explains the large experimental fluorescence quantum yield.     

Structure/reactivity/photoinitiation ability relationships in novel benzo pyrazolo (or imidazo) isoquinolinone derivatives upon visible light LEDs

Isoquinolinone derivatives bearing amino‐ or nitro‐ substituent (IQNs) have been synthesized as photoinitiators and combined with various additives (i.e., iodonium salt, N‐vinylcarbazole, amine or 2,4,6‐tris(trichloromethyl)?1,3,5‐triazine) to initiate ring‐opening cationic polymerizations (CP) or free radical polymerizations under exposure to visible LEDs (e.g., LEDs at 405 nm or 455 nm, or cold white LED) or a halogen lamp. Compared to the well‐known camphorquinone‐based systems, the novel IQNs‐based combinations employed here demonstrate higher efficiencies for the CP of epoxides. The photochemically generated reactive species (i.e., cations and radicals) from the IQNs‐based systems have been investigated by steady state photolysis, cyclic voltammetry, fluorescence, laser flash photolysis, and electron spin resonance spin trapping techniques. The structure/reactivity/photoinitiating ability relationships of IQNs‐based combinations are also discussed; the crucial role of the excited state lifetimes of the photoinitiators to ensure efficient quenching by additives is clearly underlined. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1806–1815     

Thermoset modified with polyethersulfone: Characterization and control of the morphology

Thermoset (TS) epoxy resins can be toughened with a thermoplastic (TP) for high-performance applications. The final structure morphology has to be controlled to achieve high mechanical properties and high impact resistance. Four polyethersulfone-modified epoxy resins are considered. They consist of different epoxy monomer structure (TGAP, triglycidyl-p-aminophenol and TGDDM, tetraglycidyl diaminodiphenylmethane) and a fixed amount of thermoplastic, and they are cured with two different amounts of curing agent. A reaction-induced phase separation occurs for all formulations generating morphologies, different in shapes and scales. The aim is to control the final morphology and in particular its dominant length scale. This morphology depends on the phase separation process, from the initiation to its final stage. The initiation relies on the relative miscibility of the components and on the stoichiometry between epoxy and curing agent. The kinetics depends on the viscosity of the systems. The different morphologies are characterized by electron microscopy or neutron scattering. Dynamic mechanical analysis allows confirming the presence of a phase separation even when it is not observable by electron microscopy. Vermicular morphologies with few hundreds nanometer width are obtained for the systems containing the TGAP as epoxy monomer. Systems formulated with TGDDM presents morphologies on much smaller scale of order a few tens of nanometers. We interpret the different sizes of the morphologies as a consequence of a larger viscosity for the TGDDM systems as compared to the TGAP ones rather than by a latter initiation of phase separation.     

Thermo‐ and pH‐sensitive triblock copolymers with tunable hydrophilic/hydrophobic properties

Polymers consisting of poly(acrylic acid) (PAA) and statistical poly[(acrylic acid)‐co‐(tert‐butylacrylate)] (P(AA‐co‐tBA)), attached to both extremities of Jeffamine® (D series based on a poly(propylene oxide) (PPO) with one amine function at each end) using atom transfer radical polymerization (ATRP) are presented in this article. An original bifunctional amide‐based macroinitiator was first elaborated from Jeffamine®. tBA polymerization was subsequently initiated from this macroinitiator. This polymerization occurs in a well‐controlled manner leading to narrow molecular weights distribution. Amphiphilic copolymers were finally obtained after complete or partial hydrolysis of the PtBA blocks into PAA. The control of the partial hydrolysis of tBA units, conducted in a concentrated HCl/tetrahydrofuran mixture, is demonstrated. The properties of the triblock copolymers were preliminary investigated in aqueous solution by absorbance, DLS measurements and SEC/MALS/DV/DRI analysis as a function of temperature and pH modifications, providing evidences of thermo‐ and pH‐sensitive self‐assembly of the copolymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2606–2616     

Application of SSA thermal fractionation and X‐ray diffraction to elucidate comonomer inclusion or exclusion from the crystalline phases in poly(butylene succinate‐ran‐butylene azelate) random copolymers

Poly(butylene succinate‐ran‐butylene azelate) random copolyesters were thermally fractionated by successive self‐nucleation and annealing (SSA). The samples before and after SSA were analyzed by differential scanning calorimetry (DSC) and X‐ray diffraction (WAXS and SAXS). WAXS results indicate that a small degree of comonomer inclusion is present in the crystalline phases that are formed in the copolymers depending on composition: a PBS‐like unit cell or/and a PBAz‐like unit cell, thus confirming the isodimorphic behavior of the samples. SSA on the other hand demonstrated that the degree of comonomer exclusion during crystallization is far larger than comonomer inclusion, as judged by the increase in fractionation degree with compositions leading to the pseudo‐eutectic point. Furthermore, WAXS, SAXS, and SSA results show that the isodimorphic behavior is not highly dependent on kinetic factors, as the degree of comonomer inclusion or exclusion in the samples was not significantly altered by SSA thermal fractionation, a thermal treatment that promotes annealing and molecular segregation of defects to the amorphous regions of the material. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2346–2358     

Transition‐Metal‐Mediated Cleavage of Fluoro‐Silanes under Mild Conditions

Si?F bond cleavage of fluoro‐silanes was achieved by transition‐metal complexes under mild and neutral conditions. The Iridium‐hydride complex [Ir(H)(CO)(PPh₃)₃] was found to readily break the Si?F bond of the diphosphine‐ difluorosilane {(o‐Ph₂P)C₆H₄}₂Si(F)₂ to afford a silyl complex [{[o‐(iPh₂P)C₆H₄]₂(F)Si}Ir(CO)(PPh₃)] and HF. Density functional theory calculations disclose a reaction mechanism in which a hypervalent silicon species with a dative Ir→Si interaction plays a crucial role. The Ir→Si interaction changes the character of the H on the Ir from hydridic to protic, and makes the F on Si more anionic, leading to the formation of H^δ+???F^δ? interaction. Then the Si?F and Ir?H bonds are readily broken to afford the silyl complex and HF through σ‐bond metathesis. Furthermore, the analogous rhodium complex [Rh(H)(CO)(PPh₃)₃] was found to promote the cleavage of the Si?F bond of the triphosphine‐monofluorosilane {(o‐Ph₂P)C₆H₄}₃Si(F) even at ambient temperature.