Thermoset modified with polyethersulfone: Characterization and control of the morphology

Thermoset (TS) epoxy resins can be toughened with a thermoplastic (TP) for high-performance applications. The final structure morphology has to be controlled to achieve high mechanical properties and high impact resistance. Four polyethersulfone-modified epoxy resins are considered. They consist of different epoxy monomer structure (TGAP, triglycidyl-p-aminophenol and TGDDM, tetraglycidyl diaminodiphenylmethane) and a fixed amount of thermoplastic, and they are cured with two different amounts of curing agent. A reaction-induced phase separation occurs for all formulations generating morphologies, different in shapes and scales. The aim is to control the final morphology and in particular its dominant length scale. This morphology depends on the phase separation process, from the initiation to its final stage. The initiation relies on the relative miscibility of the components and on the stoichiometry between epoxy and curing agent. The kinetics depends on the viscosity of the systems. The different morphologies are characterized by electron microscopy or neutron scattering. Dynamic mechanical analysis allows confirming the presence of a phase separation even when it is not observable by electron microscopy. Vermicular morphologies with few hundreds nanometer width are obtained for the systems containing the TGAP as epoxy monomer. Systems formulated with TGDDM presents morphologies on much smaller scale of order a few tens of nanometers. We interpret the different sizes of the morphologies as a consequence of a larger viscosity for the TGDDM systems as compared to the TGAP ones rather than by a latter initiation of phase separation.     

On the Dual Phosphorescence of Xanthone and Chromone in Glassy Hydrocarbon Hosts

Trace quantities of hydrogen‐bonding impurities in otherwise highly purified and dried glassy hydrocarbon matrices at 77 K can modify the relative triplet state energy levels, and hence the photophysical properties of two aromatic ketones, xanthone and chromone, to the extent that the intrinsic spectroscopic properties are obscured. The intrinsic spectroscopic properties of each are revealed in multicrystalline n‐alkane Shpol'skii matrices, and also can be observed in rigorously purified and dried hydrocarbon glasses at 77 K. The extreme sensitivity to stoichiometric, and even substoichiometric quantities of hydrogen‐bonding impurities arises from the near‐degeneracy of the two lowest‐lying triplet states, and the sensitive nature of the n→π* blueshift phenomena to specific hydrogen‐bonding interactions.     

Phytochemical Investigation and Biological Activities of Lantana rhodesiensis

Lantana rhodesiensis Moldenke is a plant widely used to treat diseases, such as rheumatism, diabetes, and malaria in traditional medicine. To better understand the traditional uses of this plant, a phytochemical study was undertaken, revealing a higher proportion of polyphenols, including flavonoids in L. rhodesiensis leaf extract and moderate proportion in stem and root extracts. The antioxidant activity of the extracts was also determined using three different assays: the radical 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging activity, the FRAP method (Ferric-reducing antioxidant power) and the β-carotene bleaching test. The anti-malarial activity of each extract was also evaluated using asexual erythrocyte stages of Plasmodium falciparum, chloroquine-sensitive strain 3D7. The results showed that the leaf extract exhibited higher antioxidant and anti-malarial activities in comparison with the stem and root extracts, probably due to the presence of higher quantities of polyphenols including flavonoids in the leaves. A positive linear correlation was established between the phenolic compound content (total polyphenols including flavonoids and tannins; and total flavonoids) and the antioxidant activity of all extracts. Furthermore, four flavones were isolated from leaf dichloromethane and ethyl acetate fractions: a new flavone named rhodescine (5,6,3′,5′-tetrahydroxy-7,4′-dimethoxyflavone) (1), 5-hydroxy-6,7,3′,4′,5′-pentamethoxyflavone (2), 5-hydroxy-6,7,3′,4′-tetramethoxyflavone (3), and 5,6,3′-trihydroxy-7,4′-dimethoxyflavone (4). Their structures were elucidated by ¹H, ¹³CNMR, COSY, HSQC, HMBC, and MS-EI spectral methods. Aside from compound 2, all other molecules were described for the first time in this plant species.     

Arrays of Ru nanoclusters with narrow size distribution templated by monolayer graphene on Ru

Ru nanoclusters self-assemble over macroscopic sample areas during vapor deposition of Ru on monolayer graphene (MLG) on Ru(0001). The Ru nanoclusters form arrays with a mean lateral cluster diameter of ~ 20 Å, cluster heights of 1 or 2 ML, and a size distribution that remains nearly constant with increasing coverage. Combined scanning tunneling microscopy and density functional theory (DFT) show that the clusters are templated by the MLG/Ru(0001) moiré unit cell and identify the preferred binding site of the clusters as the low fcc region of the moiré. Cross-sectional transmission electron microscopy (TEM) and high-resolution TEM contrast simulations experimentally demonstrate that the interaction of the Ru clusters with the underlying MLG/Ru(0001) leads to a local lifting of the graphene layer of the template. DFT calculations confirm this mechanism of interaction of the Ru clusters with the strongly coupled MLG/Ru(0001). Weakening of the graphene-support coupling via oxygen intercalation is shown to have a major effect on the assembly of Ru nanocluster arrays. With a preferred binding site lacking on decoupled graphene, the Ru nanoclusters grow significantly larger, and clusters with 1 to 4 ML height can coexist.     

One-pot microwave-assisted substitution of a glucuronan trisaccharide

Substitution of a glucuronic acid trisaccharide was easily performed in one step under microwave irradiation, affording a product resulting from simultaneous glycosylation, esterification and a butyl ether formation.     

Experimental investigation and analytical description of a vibro-impact NES coupled to a single-degree-of-freedom linear oscillator harmonically forced

In this paper, the dynamics of a system composed of a harmonically forced single-degree-of-freedom linear oscillator coupled to a vibro-impact nonlinear energy sink (VI-NES) is experimentally investigated. The mass ratio between the VI-NES and the primary system is about \(1\%\). Depending on the external force’s amplitude and frequency, either a strongly modulated response (SMR) or a constant amplitude response (CAR) is observed. In both cases, an irreversible transfer of energy occurs from the linear oscillator toward the VI-NES: process known in the literature as passive targeted energy transfer. Furthermore, the problem is analytically studied by using the method of multiple scales. The obtained slow invariant manifold shows the existence of a stable and of an unstable branch of solutions, as well as of an energy threshold (a saddle-node bifurcation) for the solutions to appear. Subsequently, the fixed points of the problem are calculated. When a stable fixed point is reached, the system is naturally drawn to it and a CAR is established, whereas when no stable point is attained, the system exhibits a SMR regime. Finally, a good correlation between the experimental and the analytical results is presented.     

Validating DEA as a ranking tool: An application of DEA to assess performance in higher education

There is a general interest in ranking schemes applied to complex entities described by multiple attributes. Published rankings for universities are in great demand but are also highly controversial. We compare two classification and ranking schemes involving universities; one from a published report, ‘Top American Research Universities’ by the University of Florida's TheCenter and the other using DEA. Both approaches use the same data and model. We compare the two methods and discover important equivalences. We conclude that the critical aspect in classification and ranking is the model. This suggests that DEA is a suitable tool for these types of studies.     

Cycloisomerization of (arene)chromium complexes with enyne by gold(I) catalyst for axially chiral biaryls

Planar chiral arene chromium complexes with enyne bond gave stereoselectively axial biaryl chromium complexes by gold(I) catalyzed cycloisomerization in good yields. Arene chromium complexes with enyne bonds were treated with triphenylphosphine gold bis(trifluoromethanesulfonyl)imidate in methylene chloride to give anti-biaryl monochromium complexes without formation of stereoisomers.     

Gyroscopic behaviour of stressed rotating shafts

An analysis is presented of the secondary effects due to deformation as a result of the shearing force, to the kinetic energy of rotation, and to the gyroscopic coupling, on the linearized equation of a straight shaft turning at a constant angular velocity and which is subjected to an axial torque and a compressive force. The local equations of motion of a section of shaft are derived and the magnitudes of the coupling terms are studied, non-dimensional variables being used. Results obtained by different authors in certain particular cases are rediscovered, and, in particular, the case of a shaft on short bearings is studied. Some comparisons of the theoretical results with those from experiments are given.