Excited-State Dynamics of Thienoguanosine,an Isomorphic Highly Fluorescent Analogue of Guanosine

Thienoguanosine (^thG) is an isomorphic analogue of guanosine with promising potentialities as fluorescent DNA label. As a free probe in protic solvents, ^thG exists in two tautomeric forms, identified as the H1, being the only one observed in nonprotic solvents, and H3 keto–amino tautomers. We herein investigate the photophysics of ^thG in solvents of different polarity, from water to dioxane, by combining time-resolved fluorescence with PCM/TD-DFT and CASSCF calculations. Fluorescence lifetimes of 14.5–20.5 and 7–13 ns were observed for the H1 and H3 tautomers, respectively, in the tested solvents. In methanol and ethanol, an additional fluorescent decay lifetime (≈3 ns) at the blue emission side (λ≈430 nm) as well as a 0.5 ns component with negative amplitude at the red edge of the spectrum, typical of an excited-state reaction, were observed. Our computational analysis explains the solvent effects observed on the tautomeric equilibrium. The main radiative and nonradiative deactivation routes have been mapped by PCM/TD-DFT calculations in solution and CASSCF in the gas phase. The most easily accessible conical intersection, involving an out-of plane motion of the sulfur atom in the five-membered ring of ^thG, is separated by a sizeable energy barrier (≥0.4 eV) from the minimum of the spectroscopic state, which explains the large experimental fluorescence quantum yield.     

Naphthalic anhydride derivatives: Structural effects on their initiating abilities in radical and/or cationic photopolymerizations under visible light

Only one naphthalic anhydride derivative has been reported as light sensitive photoinitiator, this prompted us to further explore the possibility to prepare a new family of photoinitiators based on this scaffold. Therefore, eight naphthalic Naphthalic anhydride derivatives (ANH1‐ANH8) have been prepared and combined with an iodonium salt (and optionally N‐vinylcarbazole) or an amine (and optionally 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine) to initiate the cationic polymerization of epoxides and the free radical polymerization of acrylates under different irradiation sources, that is, very soft halogen lamp (～ 12 mW cm^?2), laser diode at 405 nm (～1.5 mW cm^?2) or blue LED centered at 455 nm (80 mW cm^?2). The ANH6 based photoinitiating systems are particularly efficient for the cationic and the radical photopolymerizations, and even better than that of the well‐known camphorquinone based systems. The photochemical mechanisms associated with the chemical structure/photopolymerization efficiency relationships are studied by steady state photolysis, fluorescence, cyclic voltammetry, laser flash photolysis, and electron spin resonance spin‐trapping techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2860–2866     

Structure/reactivity/photoinitiation ability relationships in novel benzo pyrazolo (or imidazo) isoquinolinone derivatives upon visible light LEDs

Isoquinolinone derivatives bearing amino‐ or nitro‐ substituent (IQNs) have been synthesized as photoinitiators and combined with various additives (i.e., iodonium salt, N‐vinylcarbazole, amine or 2,4,6‐tris(trichloromethyl)?1,3,5‐triazine) to initiate ring‐opening cationic polymerizations (CP) or free radical polymerizations under exposure to visible LEDs (e.g., LEDs at 405 nm or 455 nm, or cold white LED) or a halogen lamp. Compared to the well‐known camphorquinone‐based systems, the novel IQNs‐based combinations employed here demonstrate higher efficiencies for the CP of epoxides. The photochemically generated reactive species (i.e., cations and radicals) from the IQNs‐based systems have been investigated by steady state photolysis, cyclic voltammetry, fluorescence, laser flash photolysis, and electron spin resonance spin trapping techniques. The structure/reactivity/photoinitiating ability relationships of IQNs‐based combinations are also discussed; the crucial role of the excited state lifetimes of the photoinitiators to ensure efficient quenching by additives is clearly underlined. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1806–1815     

Thermoset modified with polyethersulfone: Characterization and control of the morphology

Thermoset (TS) epoxy resins can be toughened with a thermoplastic (TP) for high-performance applications. The final structure morphology has to be controlled to achieve high mechanical properties and high impact resistance. Four polyethersulfone-modified epoxy resins are considered. They consist of different epoxy monomer structure (TGAP, triglycidyl-p-aminophenol and TGDDM, tetraglycidyl diaminodiphenylmethane) and a fixed amount of thermoplastic, and they are cured with two different amounts of curing agent. A reaction-induced phase separation occurs for all formulations generating morphologies, different in shapes and scales. The aim is to control the final morphology and in particular its dominant length scale. This morphology depends on the phase separation process, from the initiation to its final stage. The initiation relies on the relative miscibility of the components and on the stoichiometry between epoxy and curing agent. The kinetics depends on the viscosity of the systems. The different morphologies are characterized by electron microscopy or neutron scattering. Dynamic mechanical analysis allows confirming the presence of a phase separation even when it is not observable by electron microscopy. Vermicular morphologies with few hundreds nanometer width are obtained for the systems containing the TGAP as epoxy monomer. Systems formulated with TGDDM presents morphologies on much smaller scale of order a few tens of nanometers. We interpret the different sizes of the morphologies as a consequence of a larger viscosity for the TGDDM systems as compared to the TGAP ones rather than by a latter initiation of phase separation.     

Tetrahydroxydiboron (Bis-boric Acid): a Versatile Reagent for Borylation,Hydrogenation, Catalysis,Radical Reactions and H2 Generation

Diboron compounds with a B−B bond, discovered with B₂Cl₄ a century ago, have been developed only since the turn of this century for catalyzed borylation reactions, mostly with the well-know reagent bis(binacolato)diboron, (B₂pin₂). On the other hand, chemistry of tetrahydroxydiboron (THDB), also named bis-boric acid, is relatively underdeveloped. In this review, the properties of THDB as a borylation, reductant (including transfer hydrogenation), catalyst, source of radicals and generator of H₂ from water upon hydrolysis are summarized.     

Dual‐Modal Magnetic Resonance/Fluorescent Zinc Probes for Pancreatic β‐Cell Mass Imaging

Despite the contribution of changes in pancreatic β‐cell mass to the development of all forms of diabetes mellitus, few robust approaches currently exist to monitor these changes prospectively in vivo. Although magnetic‐resonance imaging (MRI) provides a potentially useful technique, targeting MRI‐active probes to the β cell has proved challenging. Zinc ions are highly concentrated in the secretory granule, but they are relatively less abundant in the exocrine pancreas and in other tissues. We have therefore developed functional dual‐modal probes based on transition‐metal chelates capable of binding zinc. The first of these, Gd ?1 , binds Zn^II directly by means of an amidoquinoline moiety (AQA), thus causing a large ratiometric Stokes shift in the fluorescence from λ_em=410 to 500 nm with an increase in relaxivity from r₁=4.2 up to 4.9 mM ^?1 s^?1. The probe is efficiently accumulated into secretory granules in β‐cell‐derived lines and isolated islets, but more poorly by non‐endocrine cells, and leads to a reduction in T₁ in human islets. In vivo murine studies of Gd ?1 have shown accumulation of the probe in the pancreas with increased signal intensity over 140 minutes.     

Diferrocenophosphaborin: A Planar‐Chiral,Redox‐Active and Anion‐Responsive Ambiphilic Ligand

A new class of Janus‐like ambiphilic ligands is introduced. The rigid diferrocene backbone in heterocycles 4‐SnP and 4‐BP creates an unprecedented chiral environment as demonstrated by multinuclear NMR and single‐crystal X‐ray studies. In addition, the ligands are redox‐responsive and the Lewis acidic borane moiety in 4‐BP can be exploited to further tune the properties: a clear decrease in the CO stretching frequency of a Vaska‐type Rh^I complex 5‐BP is observed upon addition of fluoride ions. Thus, the Lewis acid and Lewis base sites influence each other and their strength can be modulated by redox chemistry and anion binding.     

Highly Diastereoselective Synthesis of Methylenecyclobutanes by Merging Boron‐Homologation and Boron‐Allylation Strategies

A highly diastereoselective synthesis of methylenecyclobutanes possessing a quaternary stereocenter is reported, in which boron homologation of an easily‐generated cyclobutenylmetal species is performed, followed by an allylation reaction. Combining three steps in a one‐pot process further optimized the method, which afforded the expected adducts in excellent yields and stereoselectivity, starting from commercially available 4‐bromobutyne.