Dual Palladium(II)/Tertiary Amine Catalysis for Asymmetric Regioselective Rearrangements of Allylic Carbamates

The streamlined catalytic access to enantiopure allylic amines as valuable precursors towards chiral β‐ and γ‐aminoalcohols as well as α‐ and β‐aminoacids is desirable for industrial purposes. In this article an enantioselective method is described that transforms achiral allylic alcohols and N‐tosylisocyanate in a single step into highly enantioenriched N‐tosyl protected allylic amines via an allylic carbamate intermediate. The latter is likely to undergo a cyclisation‐induced [3,3]‐rearrangement catalysed by a planar chiral pentaphenylferrocene palladacycle in cooperation with a tertiary amine base. The otherwise often indispensable activation of palladacycle catalysts by a silver salt is not required in the present case and there is also no need for an inert gas atmosphere. To further improve the synthetic value, the rearrangement was used to form dimethylaminosulfonyl‐protected allylic amines, which can be deprotected under non‐reductive conditions.     

Selective Benzylic CH-Borylations by Tandem Cobalt Catalysis

Metal-catalyzed C?H activations are environmentally and economically attractive synthetic strategies for the construction of functional molecules as they obviate the need for pre-functionalized substrates and minimize waste generation. Great challenges reside in the control of selectivities, the utilization of unbiased hydrocarbons, and the operation of atom-economical dehydrocoupling mechanisms. An especially mild borylation of benzylic CH bonds was developed with the ligand-free pre-catalyst Co[N(SiMe₃)₂]₂ and the bench-stable and inexpensive borylation reagent B₂pin₂ that produces H₂ as the only by-product. A full set of kinetic, spectroscopic, and preparative mechanistic studies are indicative of a tandem catalysis mechanism of CH-borylation and dehydrocoupling via molecular Co^I catalysts.     

Photoprotection by Workwear: Ultraviolet Protection Factors for Artificial Radiation from Welding Arcs

Photoprotection by clothing is one of the most effective protective measures against solar ultraviolet radiation (UVR), and the related concept of UV protection factors (UPF) for fabrics has proven itself for decades. Although immense work has been carried out regarding factors influencing textile sun protection, the idea of UPFs for artificial UVR, if necessary with different action spectra, is payed little attention. In this work, a modified UPF equation is proposed utilizing welding arcs and the ICNIRP action spectrum. These welding UPFs (wUPF) were calculated for some workwear as a function of welding power, technique and welded material. No wUPF welding power dependence existed. By means of normalized standard emission spectra, that were further clustered with regard to welding technique, it was found that the wUPF depends exclusively on the fabric’s transmittance and the ICNIRP weighting function yielding a reduced wUPF formula. Finally, a comparison of solar and welding UPFs, based on either their full or reduced equations, is discussed.     

On the use of AES data analysis to determine local enrichments of conversion coating elements at intermetallic particles on rolled Al

In this paper, the behaviour of the industrial applied Ti/Zr conversion coating (CC) pretreatment on rolled automotive aluminium samples (AA5182) is analysed. Due to its nanometre lateral and depth resolution, Auger electron spectroscopy (AES) is used to analyse the CC distribution at surface cathodic intermetallic particles. As a result of its high surface sensitivity, the AES technique is very susceptible to differences in the top contamination layer thickness. It is demonstrated that AES point measurements performed on aluminium model samples coated with 1.5 and 3 nm of Ti (oxide) layer cannot differentiate the two-layer thicknesses if a difference in the top contamination thickness is not taken into account. A data analysis methodology is introduced, based on the ratio of normalized peak areas (enrichment ratios), to eliminate the effect of the contamination layer thickness. The experimental validation of the methodology is performed on the model samples, demonstrating errors of 2% on the enrichment ratios on similar samples with different contamination layer thicknesses, while the conventional spectra quantification results in errors of 49%. The methodology is also theoretically substantiated within certain constraints. By the use of the AES methodology, an enriched Ti and Zr deposition is confirmed at the cathodic intermetallic particles at the surface of the industrial no-rinse CC sprayed automotive aluminium sheet samples.     

Capillary electrophoresis and ultra-high-performance liquid chromatography methods in clinical monitoring of creatinine in human urine: A comparative study

Creatinine is an important diagnostic marker and is also used as a standardization tool for the quantitative evaluation of exogenous/endogenous substances in urine. This study aimed at evaluating and comparing three analytical approaches, based on hyphenations of different separation [two-dimensional capillary isotachophoresis (CITP–CITP), capillary zone electrophoresis (CZE), ultra-high-performance liquid chromatography (UHPLC)] and detection [conductivity (CD), ultraviolet (UV), tandem mass spectrometry (MS/MS)] techniques, for their ability to provide reliable clinical data along with their suitability for the routine clinical use (cost, simplicity, sample throughput). The developed UHPLC–MS/MS, CITP–CITP–CD, and CZE–UV methods were characterized by favorable performance parameters, such as linearity (r ˃ 0.99), precision (relative standard deviation, 0.22–2.97% for the creatinine position in analytical profiles), and recovery (87.1–115.1%). Clinical data, obtained from the analysis of 24 human urine samples by a reference enzymatic method, were comparable with those obtained by the tested methods (Passing–Bablok regression and Bland–Altman analysis), approving their usefulness for the routine clinical use. In this context, the UHPLC–MS/MS method provides benefits of enhanced orthogonality/accuracy and high sample throughput (threefold shorter total analysis times than the CE methods), whereas advantages of the CE methods for routine labs are simplicity and low cost of both the instrumentation and measurements.     

A Thioxanthone Sensitizer with a Chiral Phosphoric Acid Binding Site: Properties and Applications in Visible Light-Mediated Cycloadditions

A chiral phosphoric acid with a 2,2’-binaphthol core was prepared that displays two thioxanthone moieties at the 3,3’-position as light-harvesting antennas. Despite its relatively low triplet energy, the phosphoric acid was found to be an efficient catalyst for the enantioselective intermolecular [2+2] photocycloaddition of β-carboxyl-substituted cyclic enones (e.r. up to 93:7). Binding of the carboxylic acid to the sensitizer is suggested by NMR studies and by DFT calculations to occur by means of two hydrogen bonds. The binding event not only enables an enantioface differentiation but also modulates the triplet energy of the substrates.