Comparison of human blood serum DSC profiles in aqueous and PBS buffer solutions

Journal of Thermal Analysis and Calorimetry - The results of studies of physiological fluids by differential scanning calorimetry (DSC) for the purpose of diagnosis and monitoring of diseases are...     

光子晶体结构色织物研究进展

针对结构色织物难以产业化的现状,从光学效应和能够产生结构色的周期性结构两个角度系统介绍了结构色织物生色机理。随后,按照结构色织物表面光子晶体结构特征、所用光子晶体基元种类及结构色制备方法,对结构色织物进行了系统分类归纳,并指出了各自的优缺点。此外,现有结构色织物研究均为基于已有纳米粒子尺寸来表征对应结构色颜色,缺乏根据实际颜色需求选取光子晶体尺寸的研究。我们根据现有文献报道的光子晶体基元尺寸与所得结构色织物颜色种类的对应关系,通过计算得到了根据所需织物颜色种类确定光子晶体基元尺寸的公式。最后总结了结构色织物制备存在的问题,并给出了合理建议。     

The Influencing Mechanism of Acidity on the Oxidation Peak Currents of Uric Acid and Ascorbic Acid at the PACPE by Cyclic Voltammetry

In this paper, a pre‐anodized carbon paste electrode (PACPE) is fabricated by a simple electrochemical pretreatment method, which can be used for the simultaneous determination of uric acid (UA) and ascorbic acid (AA). The influencing mechanism of the acidity on the size of oxidation peak current (i_p,a) of UA and AA is discussed in detail. According to the results, in different pH conditions, the intensity of hydrogen bonding between UA, AA and the surface of PACPE, the degree of reduction reaction at the auxiliary electrode, and the structural configurations of UA and AA with different species in reaction system have evident influence on the size of oxidation peak current. In pH 7.00 phosphate buffer solution, the calibration curves for UA and AA are obtained in the range of 5.0 x 10^‐7–5.0 x 10^‐5 mol/L and 3.0 x 10^‐5–5.0 x 10^‐3 mol/L, respectively. The detection limits for UA and AA are found to be 2.0 x 10^‐8 mol/L and 1.2 x 10^‐6 mol/L, respectively. This proposed method has been successfully applied to determine UA and AA in human urine simultaneously with satisfactory results.     

NaBF4催化合成二吲哚甲烷类化合物

在乙醇水溶液中,以Na BF4为催化剂,通过吲哚与芳香醛间的串联反应合成了二吲哚甲烷衍生物。考察了催化剂种类、反应介质、温度、反应时间等因素对反应的影响,在优化条件下以较高产率得到了一系列目标产物。     

基于RST-QFD-Bayes的新型装甲装备通用质量特性评价指标体系构建研究

针对新型装甲装备通用质量特性评价指标体系难以确定的问题,在明确评价指标体系构建原则的基础上,结合新型装甲装备特点,确定了通用质量特性初始评价指标及指标筛选要求,运用QFD将新型装甲装备通用质量特性需求映射为评价指标筛选要求,采用粗糙集理论(Rough Set Theory,RST)确定了指标筛选重要度,考虑到关联度的不确定性及多个专家估计值的平均值和估计值的波动程度,将贝叶斯理论引入关系矩阵的确定中,用区间数确定了关联度,进行了评价指标筛选,构建了新型装甲装备通用质量特性评价指标体系,为新型装甲装备通用质量特性评价奠定了基础。     

Investigation on Photophysical Properties of D–π–A–π–D‐Type Fluorenone‐Based Linear Conjugated Oligomers by Using Femtosecond Transient Absorption Spectroscopy

The effects of π‐spacer and electron donor groups on the photophysical behaviors of fluorenone‐based linear conjugated oligomers have been systemically investigated. Solvent‐dependent steady‐state measurements exhibit that the fluorene vinylene (FV) spacer and the electron‐donating ability of donor group are able to modulate the spectral features of oligomers and the fluorescence quantum yield could decrease with the increasing of the solvent polarity. Meanwhile, quantum chemical calculation simulates their absorption spectra, and analyzes their electron transition components simultaneously. The transient absorption measurements focus on the photoexcitation dynamics of these oligomers in the toluene solution, which show that an intramolecular charge transfer state exists in the relaxation process of excited states, and its generation process could accelerate with the introduction of FV spacer and the enhancement of donor strength.     

Sol–gel preparation and photocatalytic performance of TiO2/SrAl2O4: Eu2+, Dy3+ toward the oxidation of gaseous benzene

It has been found that the photocatalytic activity of TiO₂ toward the decomposition of gaseous benzene can be greatly enhanced by loading TiO₂ on the surface of SrAl₂O₄: Eu²⁺, Dy³⁺ using sol–gel technology. The prepared photocatalyst was characterized by BET, XRD, and XPS analyses. XRD results reveal that the peaks of titania in either rutile or anatase form are not detected by XRD in the 2θ region from 20° to 50°. The binding energy values of Ti 2p of pure TiO₂ are 458.90 and 464.60 eV, while for TiO₂/SrAl₂O₄: Eu²⁺, Dy³⁺, the binding energy values of Ti 2p are 458.50 and 464.20 eV. The results indicate that the optimum loading of TiO₂ is 1 wt% and TiO₂/SrAl₂O₄: Eu²⁺, Dy³⁺ (1 wt%) demonstrates 1.4 times the photocatalytic activity of that of pure TiO₂, but the underlying mechanism of SrAl₂O₄: Eu²⁺, Dy³⁺ in the photocatalytic reaction remains to be unraveled.     

Mn(OH)_2空气氧化反应实验与产物表征

锰属于ⅦＢ族元素 ,其价电子构型为 3ｄ54ｓ2 ,具有ｄ区元素多种氧化态的特征 ,它的氧化态表现有 + 2、+ 3、+ 4、+ 6、+ 7,锰系化合物的化学性质也是多种多样的。关于Ｍｎ(Ⅱ )的还原性已多见报道[1～ 3 ] ,在酸性介质中Ｍｎ2 + 比较稳定 ,需要强氧化剂才能将其氧化 ,而在碱性介质中Ｍｎ2 + 沉淀为Ｍｎ(ＯＨ)2 ,易被氧化 ,即使与空气接触也能被氧化成棕色的ＭｎＯ(ＯＨ)2 。2Ｍｎ(ＯＨ) 2 +Ｏ2 =2ＭｎＯ(ＯＨ) 2 ( 1 )作出上述结论的依据是Ｍｎ的标准电极电势图[3 ] :由标准电极电势图可见 ,在碱性条件下Ｏ2 有将Ｍｎ(ＯＨ) 2 氧化成ＭｎＯ…     

超声辅助电镀的仿真与实验*

为了提高镀层的表面质量,提出了一种超声辅助电镀的方法。超声的空化与搅拌作用可以影响电镀的电沉积过程。设计了合理的换能器结构,并搭建了超声辅助电镀装置。通过对模型进行压电声学场与电镀场耦合仿真分析,结果表明：在硫酸铜电解液,镀铜时间60s,电压300V条件下,进行超声辅助电镀,镀层厚度分布均匀,镀层中部电流密度分布均匀,边缘最大电流密度是未加超声的2倍左右 。基于仿真结果,进行相同的实验测试,结果表明：超声辅助电镀可以提高镀层的均匀性,减少铜颗粒表面的杂质,提高表面的光洁度。阴极样品距离换能器头部位置在60mm左右,镀层质量良好。