考虑压电材料非线性特性时旋转式超声电机定子的主共振响应

考虑压电材料非线性本构关系，建立了旋转式超声电机定子的非线性动力学模型，利用解析与数值方法研究超声电机定子的主共振响应，以揭示压电材料非线性本构关系对定子振动特性的影响，为深入研究旋转行波超声电机的动力学机理奠定基础．     

An improved quasi-zero stiffness isolator with two pairs of oblique springs to increase isolation frequency band

Nonlinear Dynamics - Quasi-zero stiffness (QZS) isolators can achieve superior performance in vibration isolation; however, this superiority is often effective only for an excitation with the small...     

Preparation, characterization and in vitro anticancer activity of platinum(II) complexes with N-Cyclohexyl-1,3-propanediamine as the carrier

New JM118 (active form of satraplatin) analogues with N-cyclohexyl-1,3-propanediamine (N-chpda) as the carrier, cis-[Pt(N-chpda)X2] (X2=2Cl(-) (1), oxalate (2), malonate (3), 1,1-cyclobutanedicarboxylate (CBDCA) (3), and 3-hydroxy-1,1-cyclobutanedicarboxylate(HO-CBDCA) (4)), have been synthesized and characterized by elemental analysis and spectroscopic data along with X-ray crystal structure for a representative compound cis-[Pt(N-chpda)Cl2]. The complexes have also been evaluated for their in vitro anticancer activity. All these analytical data are in good agreement with the structures of the desired compounds. The Pt(II) is in a square planar environment and is coordinated by a chelating N-chpda ligand and 2Cl(-) in cis position, and there are two crystallographically independent cis-[Pt(N-chpda)Cl2] molecules linked together by intermolecular N-H...Cl hydrogen bonds. Compounds 1 and 2 are very active against human lung cancer cell line (AGZY) and human lymphocytic leukemia cell line (Raji), and are much more active than carboplatin. Platinum(II) complexes with N-cyclohexyl-1,3-propanediamine is an alternative choice for mixed ammine/aminoplatinum anticancer drugs.     

Femtosecond laser micromachined optical waveguides in LiTaO3 crystal

By using femtosecond laser micromachining, optical wave guides in both depressed cladding and dual‐line configurations have been produced in LiTaO₃ crystal. The guiding properties and the thermal stability have been investigated for both geometries, which exhibit different performance. Depressed cladding waveguides support guidance along both extraordinary and ordinary index polarizations, while dual‐line waveguides support only extraordinary index polarization. Thermal annealing has been proved to be an effective method to reduce the propagation losses. For the cladding waveguide, the lowest propagation loss was as low as 0.38 dB/cm after the annealing treatment at 400 °C. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

压电超声电机的非线性动力学研究进展

压电超声电机 (ultrasonic motor, USM) 是一个具有闭环控制的机电耦合强非线性系统,在大功率情况下,会表现出明显的非线性现象．其非线性因素主要表现为: (1) 定子与动子之间的接触非线性; (2) 定子材料非线性; (3) 温度、磨损等因素引起的缓变因素; (4) 驱动电网络中的非线性因素．由于诸多非线性因素的存在,使得 USM 系统具有跳跃、滞后、共振频率漂移、死区和饱和等非线性现象,同时,给 USM 的非线性动力学建模带来了困难．而 USM 闭环控制要求有一个合理的动力学模型,因此,研究 USM 的非线性动力学建模是 USM 研究中的一个重要内容．针对超声电机系统中普遍存在的非线性因素和非线性动力学建模方法进行了归纳,对已有文献中有关超声电机非线性动力学的研究进行了总结,指出了有关该方面的若干研究方向．      

多种非线性力作用下不平衡弹性转子的分岔特性

研究了4自由度不平衡弹性转子在非线性油膜力、非线性内阻力和非线性弹性力联合作用下的动力学特性。结果表明，当只有非线性油膜力作用时，转子只存在由于油膜失稳而导致的倍周期分岔。而当非线性油膜力与非线性内阻力共同作用时，在油膜失稳后，转子产生低频振动。转速继续增加，还会诱发内阻失稳，产生概周期运动。在倍周期分岔中，存在分岔激变现象。本文发现的由于油膜涡动而导致的内阻失稳(概周期运动)是一种未见报道的转子失稳模式(组合失稳)，它与油膜失稳(倍周期运动)一起可作为转子故障诊断的典型失稳模式。     

Isobaric (vapour + liquid) equilibria for sulfolane with toluene, ethylbenzene, and isopropylbenzene at 101.33 kPa

Isobaric (vapour + liquid) equilibrium data have been measured for the (toluene + sulfolane), (ethylbenzene + sulfolane), and (isopropylbenzene + sulfolane) binary systems with a modified Rose-Williams still at 101.33 kPa. The experimental data of binary systems were well correlated by the non-random two-liquid (NRTL) and universal quasi-chemical (UNIQUAC) activity coefficient models for the liquid phase. All the experimental results passed the thermodynamic consistency test by the Herington method. Furthermore, the model UNIFAC (Do) group contribution method was used. Sulfolane is treated as a group (TMS), the new group interaction parameters for CH₂–TMS, ACH–TMS and ACCH₂–TMS were regressed from the VLE data of (toluene + sulfolane) and (ethylbenzene + sulfolane) binary systems. Then these group interaction parameters were used to estimate phase equilibrium data of the (isopropylbenzene + sulfolane) binary system. The results showed that the estimated data were in good agreement with the experimental values. The maximum and average absolute deviations of the temperature were 4.50 K and 2.39 K, respectively. The maximum and average absolute deviations for the vapour phase compositions of isopropylbenzene were 0.0237 and 0.0137, respectively.     

A group contribution method to estimate the densities of ionic liquids

Densities of ionic liquids at different temperature and pressure were collected from 84 references. The collection contains 7381 data points derived from 123 pure ionic liquids and 13 kinds of binary ionic liquids mixtures. In terms of the collected database, a group contribution method based on 51 groups was used to predict the densities of ionic liquids. In group partition, the effect of interaction among several substitutes on the same center was considered. The same structure in different substitutes may have different group values. According to the estimation of pure ionic liquids’ densities, the results show that the average relative error is 0.88% and the standard deviation (S) is 0.0181. Using the set of group values three pure ionic liquids densities were predicted, the average relative error is 0.27% and the S is 0.0048. For ionic liquid mixtures, they are thought considered as idea mixtures, so the group contribution method was used to estimate their densities and the average relative error is 1.22% with S is 0.0607. And the method can also be used to estimate the densities of MCl_x type ionic liquids which are produced by mixing an ionic liquid with a Cl^? anion and a kind of metal chloride.     

Effect of mesh phase on wave vibration of spur planetary ring gear

The distinctive wave vibration of a ring gear affected by mesh effect is investigated based on the inherent symmetry of spur planetary gears. Compared to prior analysis, this work mainly examines the forced flexural and extensional vibrations. The superposition principle and the Fourier series are introduced to jointly deal with the wave vibrations. The dynamics of the ring gear shows that the effect of the mesh phase on the wave vibration is mainly embodied by the specific relationships between the tooth number, the planet number, the largest common factor of them, the planets’ circumferential position, and the excited wave numbers in the typical rotational, translational and planet modes. For the equal systems, the three modes can be possibly excited depending on the specific mesh phase. And the dominant vibration orders of them are 0, 1 and 2, respectively. The non-zero lowest order is equal to the largest common factor of the two numbers. But for the diametrical ones, only the first two modes can be excited, and the dominant orders of them are 0 and 1, respectively. And the lowest non-zero wave number is 2 for even tooth number and 1 for odd tooth number. As a typical application, these relationships can be used to predict and suppress some potential wave resonances of the ring gear by optimizing the ring-planet mesh phase. The main results are demonstrated with finite element examples and comparisons with the existing literature.