基于非线性放大环镜锁模铥钬共掺光纤激光器的多孤子脉冲现象实验

利用非线性放大环镜作为人工可饱和吸收体,在铥钬共掺光纤激光器中研究了多孤子脉冲现象.在同一泵浦功率不同偏振状态下,实验不仅获得了稳定的单个孤子脉冲,还观察到由单个孤子脉冲演化为2至4个孤子的锁模脉冲现象;在保偏光运行条件下增加泵浦功率,获得了孤子能量量化的演化过程.所得结果主要源于腔内弱的双折射效应等效的滤波器具有限制增益带宽和诱导多脉冲产生的作用.而调节偏振控制器对腔内增益的改变,是不同类型多脉冲现象出现的主要原因.研究结果对2μm波段非线性放大环镜光纤激光器多孤子锁模脉冲动力学特性的研究具有一定参考价值.     

天然石墨负极的改性研究

天然石墨作为锂离子二次电池负极材料得到了广泛关注. 针对天然石墨负极的体积效应和表面活性基团的不利影响, 通过溴化和高温煅烧处理制备石墨插层化合物中间体和适度膨胀的石墨样品以改善其倍率和循环寿命. 样品利用X 射线衍射(XRD)、扫描式电子显微镜(SEM)和比表面积检测(BET)分析其结构特征, 结果表明膨胀石墨样品石墨层剥离晶粒增大. 恒流充放电和循环伏安扫描测试结果表明改性后的石墨样品其倍率性能和循环稳定性均得到明显改善.     

Generation and evolution of multiple operation states in passively mode-locked thulium-doped fiber laser by using a graphene-covered-microfiber

Using graphene-covered-microfiber(GCM) as a saturable absorber, the generation and evolution of multiple operation states are proposed and demonstrated in passively mode-locked thulium-doped fiber laser. The microfiber was fabricated using the flame brushing method to an interaction length of ～ 1.2 cm with a waist diameter of ～ 10 μm. Graphene layers were grown on copper foils by chemical vapor deposition and transferred onto the polydimethylsiloxane(PDMS) to form a PDMS/graphene film, which allowed light-graphene interaction via evanescent field. With the increase of the pump power from 1.25 W to 2.15 W, five different lasing regimes, including continuous-wave, conventional soliton mode-locking, multisoliton mode-locking, a period of transition, and noise-like mode-locking, were achieved in a fiber ring cavity. To the best of our knowledge, it is the first report of the generation and evolution of multiple operation states by covering graphene on the microfiber in the 2-μm region. The results demonstrate that GCM can be a promising method for fabricating all fiber SA, and the switchable operation states can provide more portability in complex application domain.     

海港大管桩力学性能实验测试与反演研究

利用光纤光栅传感技术，在现场对大管桩在外载作用下的变形情况进行了测试. 根据实验测试结果，利用数值法反分析大管桩力学性能参数，同时得到大管桩接缝处的环氧树脂材料对大管桩整体力学性能影响很小. 反演出的合理的力学性能参数为大管桩的正确受力分析以及健康诊断提供了依据.     

2-μm mode-locked nanosecond fiber laser based on MoS_2 saturable absorber

We demonstrated a 2-μm passively mode-locked nanosecond fiber laser based on a MoS_2 saturable absorber(SA).Owing to the effect of nonlinear absorption in the MoS_2 SA, the pulse width decreased from 64.7 to 13.8 ns with increasing pump power from 1.10 to 1.45 W. The use of a narrow-bandwidth fiber Bragg grating resulted in a central wavelength and 3-dB spectral bandwidth of 2010.16 and 0.15 nm, respectively. Experimental results show that MoS_2 is a promising material for a 2-μm mode-locked fiber laser.     

基于石墨烯可饱和吸收体的纳秒锁模掺铥光纤激光器

报道了一种基于石墨烯可饱和吸收体的纳秒锁模掺铥光纤激光器.该激光器采用环形腔结构,利用自制的三层石墨烯薄膜作为可饱和吸收体实现锁模.同时在腔内插入一个窄带光纤光栅,约束腔内起振的纵模数,适当调节抽运功率和偏振控制器的角度,得到了重复频率为3.8 MHz、脉宽在3.8—94.3 ns之间灵活可调的2μm纳秒锁模脉冲输出,整个脉宽调节范围超过90 ns.此外,由于获得的兆赫兹纳秒锁模脉冲时间带宽积在49—1119范围内,即存在强烈的啁啾,因而可作为2μm波段啁啾脉冲放大系统中的种子源使用.