Imposing accurate wall boundary conditions in corrective‐matrix‐based moving particle semi‐implicit method for free surface flow

Corrective matrix that is derived to restore consistency of discretization schemes can significantly enhance accuracy for the inside particles in the Moving Particle Semi‐implicit method. In this situation, the error due to free surface and wall boundaries becomes dominant. Based on the recent study on Neumann boundary condition (Matsunaga et al, CMAME, 2020), the corrective matrix schemes in MPS are generalized to straightforwardly and accurately impose Neumann boundary condition. However, the new schemes can still easily trigger instability at free surface because of the biased error caused by the incomplete/biased neighbor support. Therefore, the existing stable schemes based on virtual particles and conservative gradient models are applied to free surface and nearby particles to produce a stable transitional layer at free surface. The new corrective matrix schemes are only applied to the particles under the stable transitional layer for improving the wall boundary conditions. Three numerical examples of free surface flows demonstrate that the proposed method can help to reduce the pressure/velocity fluctuations and hence enhance accuracy further.     

Interaction between the end groups and the main chain of conjugated polymers by time-resolved EPR and fluorescence spectroscopy

ABSTRACT

Interaction between a zinc porphyrin (ZnPor) as the end-group and poly(9,9-di-n-octylfluorene-2,7-vinylene) (PFV) as the main chain in a porphyrin end-modified fluorescent conjugated polymer, ZnPFV, was studied by time-resolved electron paramagnetic resonance (EPR) and fluorescence spectroscopy. While fluorescence from the PFV part of ZnPFV showed a spectral profile almost identical to that of a PFV oligomer without end-modification, the emission spectrum of the ZnPor part exhibited a much broader profile compared to that of the reference zinc porphyrin monomer. Based on the analysis of lifetimes and quantum yields, it was found that radiative rate constant of the ZnPor part was enhanced by nearly three times. The observed unusual enhancement in the radiative rate constant was rationalised in terms of a partial π-conjugation between the end group and the main chain, as a result of co-planarisation in fluid solution. On the other hand, the time-resolved EPR spectrum of ZnPFV at 100?K basically showed a similar spectral pattern to that of the reference zinc porphyrin, but with significant differences in zero-field spitting parameters and initial population ratios. The π-system of the excited triplet state is deduced to deviate from D_4h symmetry in the end zinc porphyrin groups. The obtained results show that interaction of the porphyrin end group with the main chain of the polymer significantly influences the excited singlet state properties of the porphyrin, while its triplet state properties were affected to a lesser extent.     

Synthesis of Anthracene Derivatives with Azaacene-Containing Iptycene Wings and the Utilization as a Dopant for Solution-Processed Organic Light-Emitting Diodes

Substituted acene derivatives are regarded as promising materials for organic electronic devices such as organic light-emitting diodes (OLEDs). In particular, anthracene derivatives are known to exhibit good fluorescence property, with the air stability and solubility in common organic solvents expected to give advantages for solution-processed device fabrication. In this study, a series of bistriisopropylsilyl(TIPS)ethynyl anthracene derivatives with azaacene-containing iptycene wings have been synthesized by using condensation reactions. Effects of size of azaacenes on optical properties and packing structures were investigated. UV/Vis absorption and fluorescence spectra indicate that the π-elongation of iptycene units has small effects on the overall π-system, which is also supported by electrochemical measurements. Secondly, single-crystal X-ray analysis implies that the molecules likely have interactions with the iptycene units of adjacent molecules, while the iptycene wings and TIPSethynyl groups can prevent the central anthracene unit from undesirable non-radiative energy loss. Finally, the most emissive derivative was used as a dopant for solution-processed OLEDs, showing obvious electroluminescence with a luminance of over 920 cd m⁻².     

Electrospun tin-carbon nanocomposite as anode material for all solid state lithium-ion batteries

Journal of Solid State Electrochemistry - All-solid-state batteries represent the next generation of electrochemical energy storage systems. A tin-carbon nanocomposite material is prepared by the...     

Conformational Changes and Redox Properties of Bimetallic Single Helicates of Hexapyrrole-α,ω-dicarbaldehydes

The hexapyrrole-α,ω-dicarbaldehydes 1 a and 1 b were metallated with Cu^II, Ni^II, and Pd^II to give bimetallic complexes where a pair of 3 N+O four-coordinate metal planes are helically distorted and the central 2,2′-bipyrrole subunit adopts a cis or trans conformation. X-ray crystallographic analysis of the bisCu complex revealed a closed form with a cis-2,2′-bipyrrole subunit and an open form with a trans-2,2′-bipyrrole subunit. The bisPd complexes took a closed form both in the solid state and in solution. They are regarded as single helicates of two turns and the energy barrier for the interchange between an M helix and a P helix was remarkably influenced by the bulky 3,3′-substituent of the central 2,2′-bipyrrole subunit. Although the bisNi complexes adopt a closed form in the solid state, they exist as a homohelical open C₂-symmetric form or a heterohelical open C_i-symmetric form in solution. A theoretical study suggested that the closed form of 1 a Pd was stabilized by the Pd–Pd interaction. Compound 1 a Pd was reversibly oxidized by one electron at 0.14 V versus ferrocene/ferrocenium (Fc/Fc⁺) and this oxidized species showed Vis/NIR absorption bands at λ=767 and 1408 nm.     

Simultaneous determination of erlotinib and its isomeric major metabolites in human plasma using isocratic liquid chromatography–tandem mass spectrometry and its clinical application

This study developed a method for the simultaneous determination of erlotinib and its isomeric major metabolites, OSI‐413 and OSI‐420, in human plasma using an isocratic liquid chromatography–tandem mass spectrometry. Plasma specimens deproteinized with acetonitrile were separated using a 3‐µm particle size octadecylsilyl column. The m/z values of the precursor and product ions for the analytes were as follows: erlotinib, 394.2/278.2; and OSI‐413 and OSI‐420, 380.2/278.2. The total run time was 21 min and no peaks interfering with the analytes and internal standard (d₆‐erlotinib) in human plasma were observed. The calibration curves of erlotinib, OSI‐413 and OSI‐420 were linear over the concentration ranges of 10–3000, 2–500 and 2–100 ng/mL, respectively. The pretreatment recovery ratios were >86.1%. The intra‐ and inter‐assay precisions and accuracies were <12.7 and 89.0–108.9% for all analytes. This validated method was applied to the determination of plasma samples in lung cancer patients receiving 150 mg of oral erlotinib. The plasma concentration ranges of erlotinib, OSI‐413 and OSI‐420 were 373–2354, 15.7–379 and 2.5–43.6 ng/mL, respectively. In conclusion, the present method can be helpful for evaluating the plasma exposures of erlotinib and its major isomeric metabolites in clinical settings. Copyright © 2014 John Wiley & Sons, Ltd.     

NMR‐based analysis of the chemical composition of Japanese persimmon aqueous extracts

Japanese persimmon (Diospyros kaki L.) is recognized as an outstanding source of biologically active compounds relating to many health benefits. In the present study, NMR spectroscopy provided a comprehensive metabolic overview of Japanese persimmon juice. Detailed signal assignments of Japanese persimmon juice were carried out using various 2D NMR techniques incorporated with broadband water suppression enhanced through T₁ effects (BB‐WET) or WET sequences, and 26 components, including minor components, were identified. In addition, most components were quantitatively evaluated by the integration of signals using conventional ¹H NMR and BB‐WET NMR. This is the first detailed analysis combined with quantitative characterization of chemical components using NMR for Japanese persimmon. Copyright © 2015 John Wiley & Sons, Ltd.