单面柱局域共振声子晶体低频带隙特性分析及结构改进研究

基于有限元法对单面柱局域共振声子晶体进行带隙特性分析,研究了结构参数对该类型声子晶体的影响。结果表明:随着散射体高度的增加,单面柱声子晶体的第一完全带隙的起始频率逐渐降低,带宽逐渐增大;随着基板厚度的增大,单面柱声子晶体的起始频率逐渐升高,截止频率先增大后减小。并且在经典单面柱声子晶体的基础上,组合了两种新型的三组元单面柱声子晶体结构:嵌入式单面柱声子晶体(以下简称结构Ⅰ)和粘接式单面柱声子晶体(以下简称结构Ⅱ)。通过对其带隙特性的分析得出:这两种新结构与经典的单面柱声子晶体相比,都具有更低频的带隙,这对于低频减振降噪是非常有利的。本文的结果将对实际的工程应用提供一定的理论指导。     

基于2,5-二溴对苯二甲酸配体的锌/钴配合物合成、晶体结构及性质

将有机物2,5-二溴对苯二甲酸(H₂L₁)和2,2′-联吡啶(L₂)作为双配体,使用溶剂热法和七水合硫酸锌(ZnSO₄·7H₂O)、六水合硝酸钴(Co(NO₃)₂·6H₂O)分别反应,得到配合物[Zn(L₁)(L₂)(H₂O)]_n(1)和配合物[Co(L₁)(L₂)(H₂O)]_n(2)。采用单晶X射线衍射、元素分析、红外光谱、紫外光谱、荧光光谱、热重分析等测试方法对这两种物质进行分析研究。单晶测试结果表明配合物1是单斜晶系,以Zn²⁺配位连接L^2-₁与L₂形成一维链状结构,各条链在分子间氢键和π…π共轭作用下有规律地堆叠形成三维网络结构。配合物2是三斜晶系,Co1离子和Co1ⁱ离子由H₂L₁上的羧酸氧原子O4和O4ⁱ连接,形成双齿螯合的配位结构单元,以Co²⁺配位连接 L^2-₁和L₂形成二维网格结构,各层在O—H…O分子间氢键和范德瓦耳斯力作用下有规律的堆叠形成三维网络结构。配合物1和2均含有芳香杂环、羧基杂环和氮杂环,具有良好的荧光性质和热稳定性,最大发射波长分别为345 nm和333 nm。     

A new direct band gap silicon allotropeο-Si32

Silicon is a preferred material in solar cells,and most of silicon allotropes have an indirect band gap.Therefore,it is important to find new direct band gap silicon.In the present work,a new direct band gap silicon allotrope of o-Si32 is discovered.The elastic constants,elastic anisotropy,phonon spectra,and electronic structure of o-Si32 are obtained using first-principles calculations.The results show that o-Si32 is mechanically and dynamically stable and is a direct semiconductor material with a band gap of 1.261 e V.     

曲面相机阵列多分辨成像方法

针对现有成像系统因数据冗余而无法兼顾大视场、高分辨、高效性的问题,结合人眼视网膜变分辨成像和并列式复眼成像原理,设计一种多分辨率成像的复合仿生成像系统.该成像系统按照球面和平面兼顾的曲面布局方式,利用11个相机镜头构建相机阵列,组成了四个等级分辨率的子眼拍摄模块.通过物距100 m的远景实验和物距10 m的近景实验发现,该系统在实现高分辨成像的同时,获得总视场达150.8°×37.8°.多分辨率成像实验结果表明,该系统获取的图像的分辨率从中心视场到边缘视场逐渐降低,并且相较于中心清晰全视场成像,四级分辨率成像的拼接图像数据量减少了17.2倍的数据冗余.     

Elucidating Molecule–Plasmon Interactions in Nanocavities with 2 nm Spatial Resolution and at the Single‐Molecule Level

The fundamental understanding of the subtle interactions between molecules and plasmons is of great significance for the development of plasmon‐enhanced spectroscopy (PES) techniques with ultrahigh sensitivity. However, this information has been elusive due to the complex mechanisms and difficulty in reliably constructing and precisely controlling interactions in well‐defined plasmonic systems. Herein, the interactions in plasmonic nanocavities of film‐coupled metallic nanocubes (NCs) are investigated. Through engineering the spacer layer, molecule–plasmon interactions were precisely controlled and resolved within 2 nm. Efficient energy exchange interactions between the NCs and the surface within the 1–2 nm range are demonstrated. Additionally, optical dressed molecular excited states with a huge Lamb shift of ≈7 meV at the single‐molecule (SM) level were observed. This work provides a basis for understanding the underlying molecule–plasmon interaction, paving the way for fully manipulating light–matter interactions at the nanoscale.     

NSLS and NSLS-II: The Foundation and the Future of Synchrotron Light Sources

On September 30, 2014, after 32 years of outstanding operations, the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory was shuttered for the last time.     

Ionic Conductivity of β‐Cyclodextrin–Polyethylene‐Oxide/Alkali‐Metal‐Salt Complex

Highly conductive, crystalline, polymer electrolytes, β‐cyclodextrin (β‐CD)–polyethylene oxide (PEO)/LiAsF₆ and β‐CD–PEO/NaAsF₆, were prepared through supramolecular self‐assembly of PEO, β‐CD, and LiAsF₆/NaAsF₆. The assembled β‐CDs form nanochannels in which the PEO/X⁺ (X=Li, Na) complexes are confined. The nanochannels provide a pathway for directional motion of the alkali metal ions and, at the same time, separate the cations and the anions by size exclusion.     

含硫氨基酸与本征及缺陷石墨烯表面的相互作用

半胱氨酸及蛋氨酸是人体的两种含硫氨基酸,在生物活性中发挥着巨大的作用.本研究采用密度泛函理论方法对以上两种氨基酸在本征及缺陷石墨烯表面的吸附机理进行了详细研究.主要考虑了两种吸附体系:半胱氨酸及蛋氨酸平躺在两种石墨烯表面;两种氨基酸垂直地放置于两种石墨烯表面,且含硫的基团靠近表面.研究结果表明,半胱氨酸及蛋氨酸初始构型对它们之间的相互作用有一定的影响.两种氨基酸平躺时有较大的吸附能.此外,吸附能的结果显示两种氨基酸可以更好的与缺陷石墨烯表面紧密结合.同时,蛋氨酸与本征及缺陷石墨烯相互作用均大于半胱氨酸与本征及缺陷石墨烯相互作用.模拟结果有望为含硫氨基酸的石墨烯传感器提供有用的指导.     

A coefficient identification problem for a mathematical model related to ductal carcinoma in situ

We consider a coefficient identification problem for a mathematical model with free boundary related to ductal carcinoma in situ (DCIS). This inverse problem aims to determine the nutrient consumption rate from additional measurement data at a boundary point. We first obtain a global‐in‐time uniqueness of our inverse problem. Then based on the optimization method, we present a regularization algorithm to recover the nutrient consumption rate. Finally, our numerical experiment shows the effectiveness of the proposed numerical method.