Nanofluids thermal performance in the horizontal annular passages: a recent comprehensive review

Journal of Thermal Analysis and Calorimetry - Nanofluids are prepared to enrich thermo-physical and convective heat transfer properties by suspending nanometer particles in a base fluid. For...     

Effect of different starch contents on physical,morphological, mechanical,barrier, and biodegradation properties of tapioca starch and poly(butylene adipate-co-terephthalate) blend film

Study on degradation behaviors of biodegradable poly(butylene adipate-co-terephthalate) (PBAT) blended with different compositions of thermoplastic starch (TPS) under soil burial and natural weathering environments is vital in order to predict the product service-life and planning for in situ biodegradation after product disposal. In this article, different compositions of TPS (0%, 20%, 40%, 50%, and 60%) were compounded with PBAT using single screw extruder. The samples were characterized for their tensile properties, fractured surface morphology, water barrier and surface hydrophorbicity properties in order to investigate the effect of starch fractions in PBAT blends. The degradation behavior under natural weathering and soil burial conditions was also determined during the 9 months duration by observing the change of physical appearance, weight loss, surface morphology, chemical structural, and tensile properties. The findings showed that the addition of TPS (20%, 40%, 50%, and 60%) had led to a reduction in tensile strength (41.47%, 60.53%, 63.43%, and 68.53%), and reduction in elongation at break (42.92%, 92.1%, 92.23%, and 93.22%, respectively) and water barrier properties. The findings also showed that there were distinct degradation behavior under both conditions. Upon exposure to natural weathering, photodegradation and Norrish type I & II occurred whereas under the soil burial condition, hydrolytic, and enzymatic degradation take places. Sample with the highest starch contents underwent the highest weight loss and reduction in tensile properties under both environments. The findings in this study are useful in order to investigate the feasibility of PBAT/Tapioca starch blends for biodegradable plastic film for various industrial applications especially in packaging and agricultural mulch.     

Investigation on the Use of Graphene Oxide as Novel Surfactant for Stabilizing Carbon Based Materials

The present work reported on the use of graphene oxide (GO) as effective dispersant to isolate different carbon allotropes. The nature of its chemical structure which consists of hydrophobic and hydrophilic components enables GO to behave as surfactant, paving routes for dissolution of graphitic materials and achieving surfactant free all-carbon solutions. Two additional carboneous materials under the family of fullerene (carbon nanofiber—CNF) and graphite (graphene nanoplatelets—GnP) were introduced within the present study to form a new GO based hybrid complexes on top of the commonly investigated carbon nanotube (CNT) based GO hybrid. Investigation on GO stability with respect to particle size and zeta potential measurements showed that the strength of its dispersibility was highly dependent on its morphological size and less affected by the pH. Rheological study revealed that GO shear–strain relationship is highly sensitive to the particle size. The GO viscosity experienced dramatic changes from Newtonian toward shear thinning behaviors as the particle size increases. Thermal conductivity measurement highlighted as high as 8% increase in magnitude with the addition of CNT, CNF, and GnP carbon constituents, indicating that the enhancement may be attributed to the much efficient thermal transport along the conducting path of pristine carbon allotropes.     

NIR spectroscopic properties of aqueous acids solutions

Acid content is one of the important quality attributes in determining the maturity index of agricultural product, particularly fruits. Despite the fact that much research on the measurement of acidity in fruits through non-destructive spectroscopy analysis at NIR wavelengths between 700 to 1,000 nm has been conducted, the same response towards individual acids is not well known. This paper presents NIR spectroscopy analysis on aqueous citric, tartaric, malic and oxalic solutions through quantitative analysis by selecting a set of wavelengths that can best be used to measure the pH of the solutions. The aquaphotomics study of the acid solutions has generated R2 above 0.9 for the measurement of all acids. The most important wavelengths for pH are located at 918-925 nm and 990-996 nm, while at 975 nm for water.     

Low cost anisotropic etching of monocrystalline Si (1 0 0): Optimization using response surface methodology

Reduced surface reflectance and enhanced light trapping is required by any high efficiency solar cell. Anisotropic etching was done on silicon (1 0 0) by using tetramethyl ammonium hydroxide TMAH, (CH₃)₄NOH, solution at 85 °C. Process variables considered were solution concentration and time proposed by response surface methodology (RSM). An effective surface texture was resulted with reflectance less than 8% without antireflection coating. The antireflection mechanism was also co-related with the etch rate of Si. Optimized values predicted by RSM for time and TMAH concentration were 5 min and 3.50% respectively. The technique and optimization of parameters by using response surface methodology (RSM) could be valuable in the texturization process for high-efficiency Si solar cells.     

Radiation Graft Copolymerization of a Mixture of Styrene and n-Butyl Acrylate on Natural Rubber Latex

The radiation graft copolymerization of a mixture of styrene (St) and n-butyl acrylate (NBA) monomers on natural rubber (NR) latex has been studied. An irradiation dose of about 18 kGy was needed to attain a conversion of about 80%. The tensile strength of the grafted NR film increases with increasing irradiation dose. A film tensile strength of about 155 kg/cm² was attained by irradiation of a mixture of St, NBA, and NR latex with a dose of about 14 kGy. At low concentrations of monomer in the latex, the Mooney viscosity of the film increases with increasing irradiation dose. At higher monomer concentration, grafting and homopolymerization proceed more favorably than crosslinking, and thus the Mooney viscosity decreases with increasing dose. Thermal analysis of the film showed that the grafted NR was more heat resistant than ungrafted NR.     

Radiation Emulsion Polymerization of n-Butyl Acrylate,Glycidyl Methacrylate,and Methacrylic Acid

The rate of emulsion polymerization of N-butyl acrylate and glycidyl methacrylate is influenced by the irradiation dose rate and the emulsifier type. With regard to the rate of polymerization and the stability of polymer emulsion, sodium dodecyl benzene sulfonate (SDBS) is found to be a better emulsifier than Tween 20. Irradiation dose, in order to obtain 90% conversion, is about 50 krd using SDBS emulsifier, compared to about 160 krd using Tween 20 emulsifier, both with an irradiation dose rate of about 80 krd/h. Irradiation dose, in order to obtain the same conversion, decreases with a decrease in irradiation dose rate. Thermal analysis showed that the glycidyl methacrylate content greatly influences the thermal stability of the polymer film.     

Experimental study on thermo-physical and rheological properties of stable and green reduced graphene oxide nanofluids: Hydrothermal assisted technique

In this study a dehydration hydrothermal technique has been used to introduce a simple, environmentally friendly and facile method for manufacturing highly dispersed reduced graphene oxide for improving the thermo-physical and rheological properties of heat transfer liquids. The hydrothermal reduction of graphene oxide was verified by various characterizations methods such as UV–visible absorption spectroscopy, Zeta potential, Raman spectroscopy, X-ray photoemission spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and transmission electron microscopy. A thorough investigation was conducted on the thermo-physical properties of reduced graphene oxide at concentrations of 0.02, 0.04, 0.06, and 0.08?wt% under different temperatures. Significant improvements in electrical and thermal conductivity were obtained by adding a small amount of hydrothermal-assisted reduced graphene oxide (h-rGO) in the suspension. The viscosity and density remained relatively unchanged with the increase of concentrations where the pH was maintained within the desirable value, despite the fact that no additive was used during the reduction process. It is noteworthy to highlight that the h-rGO aqueous suspensions have shown Newtonian behavior. Results indicated that the h-rGO could be employed as a promising additive for conventional heat transfer liquids for different thermal applications.     

Numerical ray tracing through a modified cladding fiber optic segment sensors

By using 3-D geometric optics, the effect of a modified cladding on the transmission of light through optical fiber is investigated. Analysis of the light transmission of the optical fiber as function of the modified cladding refraction index and length are presented for various input illumination focused and compared with 3-D ray theory. Applications to chemical sensors are also discussed.The intensity of light signal transmitted through an optical fiber, which its cladding over a finite length is removed, is used as a sensor of refractive of liquids, in which the fiber is immersed. The transmitted light intensity is measured as a function of liquid refractive index for different lengths of the unclad section of the fiber and at each unclad length its sensitivity to change in refractive index of liquid is presented.