Nanofluids thermal performance in the horizontal annular passages: a recent comprehensive review

Journal of Thermal Analysis and Calorimetry - Nanofluids are prepared to enrich thermo-physical and convective heat transfer properties by suspending nanometer particles in a base fluid. For...     

A switchable ionic liquid with polarity swing-assisted regeneration properties used for the preconcentration of cadmium in biological samples

In the present study the cadmium (Cd) was determined in serum samples of psoriatic patients. The severity of psoriasis was evaluated according to criteria based on standard clinical diagnosis using Psoriasis Area Severity Index (PASI) score. In present study, an innovative tunable green solvent system based microextraction (TSS-ME) was applied for the enrichment of Cd in acid digested serum samples prior to determination with flame atomic absorption spectrometry. The hydrophobic complex of Cd-ammonium pyrrolidine thiocarbamate was extracted in a tunable solvent system which was prepared from a polybasic amine (N, N, N′, N′-tetramethyl-1, 4-diaminobutane), decanol and water system. The tunable green solvent system (TSS) which has zero ionic strength was converted to homogeneous monophasic polar hydrophilic phase via exposure to CO₂ at different pressure and time duration. Then hydrophobic enriched Cd- ammonium pyrrolidine thiocarbamate was back extracted, using HNO₃ (0.1 to 0.5 mol L⁻¹) then the second round of TSS-ME was applied. The acidic aqueous phase enrich with analyte was separated from tunable solvent. The separated TSS was easily reused for up to 10 time for preconcentration purposes without loss of its enrichment character. The smoker and nonsmoker psoriatic patients at PASI >10, have two to three folds higher Cd levels in serum samples than healthy persons.     

Characteristics investigation on heat transfer growth of sonochemically synthesized ZnO-DW based nanofluids inside square heat exchanger

Journal of Thermal Analysis and Calorimetry - In recent decades, the growth of heat transfer using nanomaterials in the conventional base fluid has caught the attention of researchers...     

Analysis of a “3-(Naphthalen-1-ylimino)indolin-2-one” Compound and Its Antimicrobial Assessment Using Lipid-Based Self-Nanoemulsifying Formulations

In recent years, indole derivatives have acquired conspicuous significance due to their wide spectrum of biological activities—antibacterial, antiviral, and anticonvulsant. This compound is derived from naturally grown plants. Therefore, synthesis of a novel “3-(Naphthalen-1-ylimino)indolin-2-one” compound (2) and its analysis using UPLC systems along with antimicrobial assessment was the aim of the current study. Isatin was used as a parent drug for synthesizing compound (2). Liquid Chromatographic analysis was performed using a C18 BEH column (1.7 μm 2.1 × 50 mm) by UPLC systems. Degradation studies were carried out to see whether acid, base, thermal, and oxidizing agents had any impact on the synthesized molecule in stress conditions (100 °C). A lipid-based self-nanoemulsifying formulation was developed and selectivity, specificity, recovery, accuracy, and precision were measured as part of the UPLC system’s validation process. Antimicrobial studies were conducted using gram-positive and gram-negative bacteria. The standard samples were run with a concentration range of 5.0–100.0 μg/mL using the isocratic mobile phase comprising of methanol/water (70/30 %v/v) at 234 nm; good linearity (R² = 0.9998) was found. The lower limits of detection (LOD) and quantitation (LOQ) of the method were found to be 0.81 μg/mL and 2.5 μg/mL, respectively. The coefficients of variation were found to be less than 2%. The antimicrobial study suggests that compound (2) has a substantial growth effect against gram-negative bacteria. It was successfully synthesized and applied to measure the concentrations in lipid-based dosage form, along with potent antimicrobial activities.     

Multifunctional mesoporous silica nanoparticles in poly(ethylene‐co‐vinyl acetate) for transparent heat retention films

Transparent inorganic‐polymer nanocomposite films are of tremendous current interest inemerging solar coverings including photovoltaic encapsulants and commercial greenhouse plastics, but suffer from significant radiative heat loss. This work provides a new and simple approach for controlling this heat loss by using mesoporous silica/quantum dot nanoparticles in poly(ethylene‐co‐vinyl acetate) (EVA) films. Mesoporous silica shells were grown on CdS‐ZnS quantum dot (QDs) cores using a reverse microemulsion technique, controlling the shell thickness. These mesoporous silica nanoparticles (MSNs) were then melt‐mixed with EVA pellets using a mini twin‐screw extruder and pressed into thin films of concentration variable controlled thickness. The results demonstrate that the experimental MSNs showed improved infrared and thermal wavebands retention in the EVA transparent films compared to commercial silica additives, even at lower concentrations. It was also found MSNs enhanced the quantum yield and photostability of the QDs, providing high visible light transmission and blocking of UV transmission of interest for next generation solar coatings. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 851–859     

Thermal evaluation of a heat pipe working with n-pentane-acetone and n-pentane-methanol binary mixtures

Journal of Thermal Analysis and Calorimetry - In the present study, a set of experiments were accomplished to appraise the thermal performance and heat transfer of n-pentane-acetone and...     

Covalently functionalized pentaethylene glycol-thermally treated graphene towards enhanced thermophysical and heat transfer characteristics

Journal of Thermal Analysis and Calorimetry - The current study outlined the use of synthesized, covalently functionalized pentaethylene glycol-thermally treated graphene (PEG-TGr). Miscible PEG...     

Evaluation of a novel nanocrystalline hydroxyapatite powder and a solid hydroxyapatite/Chitosan-Gelatin bioceramic for scaffold preparation used as a bone substitute material

Artificially fabricated hydroxyapatite (HAP) shows excellent biocompatibility with various kinds of cells and tissues which makes it an ideal candidate for a bone substitute material. In this study, hydroxyapatite nanoparticles have been prepared by using the wet chemical precipitation method using calcium nitrate tetra-hydrate [Ca(NO₃)₂.4H₂O] and di-ammonium hydrogen phosphate [(NH₄)₂ HPO₄] as precursors. The composite scaffolds have been prepared by a freeze-drying method with hydroxyapatite, chitosan, and gelatin which form a 3D network of interconnected pores. Glutaraldehyde solution has been used in the scaffolds to crosslink the amino groups (|NH₂) of gelatin with the aldehyde groups (|CHO) of chitosan. The X-ray diffraction (XRD) performed on different scaffolds indicates that the incorporation of a certain amount of hydroxyapatite has no influence on the chitosan/gelatin network and at the same time, the organic matrix does not affect the crystallinity of hydroxyapatite. Transmission electron microscope (TEM) images show the needle-like crystal structure of hydroxyapatite nanoparticle. Scanning Electron Microscope (SEM) analysis shows an interconnected porous network in the scaffold where HAP nanoparticles are found to be dispersed in the biopolymer matrix. Fourier transforms infrared spectroscopy (FTIR) confirms the presence of hydroxyl group (OH^-) , phosphate group (PO^3-₄) , carbonate group (CO^2-₃) , imine group (C=N), etc. TGA reveals the thermal stability of the scaffolds. The cytotoxicity of the scaffolds is examined qualitatively by VERO (animal cell) cell and quantitatively by MTTassay. The MTT-assay suggests keeping the weight percentage of glutaraldehyde solution lower than 0.2%. The result found from this study demonstrated that a proper bone replacing scaffold can be made up by controlling the amount of hydroxyapatite, gelatin, and chitosan which will be biocompatible, biodegradable, and biofriendly for any living organism.     

Cloud point and solid phase extraction of vanadium in surface and bottled mineral water samples using 8-hydroxyquinoline as a complexing reagent

Cloud point extraction (CPE) and solid phase extraction (SPE) methods were developed for the determination of ??g l^?1 of vanadium ions in surface, tap and bottled mineral water samples, based on the rapid reaction of vanadium(V) with 8- hydroxyquinoline (8-quinolinol) at pH 3?C5. Both the sensitive extraction methods were successfully employed for the preconcentration of V in real samples. For CPE, V complexed with 8-quinolinol and then was entrapped in non-ionic surfactant Triton X-114, while for SPE, V was adsorbed on XAD -2 impregnated with 8-quinolinol. The experimental conditions for SPE (pH, eluent, and contact time between the liquid sample and the resin) and CPE (pH of sample solution, concentration of 8- quinolinol and Triton X-114, equilibration temperature and time period for shaking) were investigated in detail. The validity of SPE/CPE of V was checked by certified reference material of water (SRM-1643e). The extracted surfactant-rich phase (200 ??l) was mixed with 200 ??l of HNO₃ in ethanol and this final volume was injected into electrothermal atomic absorption spectrometry with different modifiers. Under these conditions, the preconcentration of 25 ml sample solution allowed the raising of an enrichment factor of 100 and 10 folds for CPE and SPE, respectively. The concentration of V in surface water (river and lake), tap water and bottled mineral water samples was found to be in the range of 1.30?C19.9, 1.05?C5.25 and 0.67?C1.21 ??g l^?1, respectively.