Changes in the near-edge X-ray absorption fine structure spectra of long-chain diacetylene derivatives through photopolymerization in Langmuir–Blodgett films

Photopolymerization of cadmium 10,12-pentacosadiynoate (CdDA) in Langmuir–Blodgett (LB) films, with the molecular packing well arranged by moderate preannealing, was investigated with near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. Greenish films of polydiacetylene with an absorption wavelength of 705 nm were obtained through the photopolymerization of preannealed monomer LB films, and this resulted in an extended π-conjugate system based on the well-ordered monomer in a two-dimensional arrangement. The electronic structures of the polydiacetylenes were found to be correlated to the variation of the molecular arrangements in the films from the changes in the NEXAFS spectra through photopolymerization in the LB films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2329–2336, 2004     

Structural developments in synthetic rubbers during uniaxial deformation by in situ synchrotron X‐ray diffraction

The molecular orientation and strain‐induced crystallization of synthetic rubbers—polyisoprene rubber, polybutadiene rubber, and butyl rubber [poly(isobutylene isoprene)]—during uniaxial deformation were studied with in situ synchrotron wide‐angle X‐ray diffraction. The high intensity of the synchrotron X‐rays and the new data analysis method made it possible to estimate the mass fractions of the strain‐induced crystals and amorphous chain segments in both the oriented and unoriented states. Contrary to the conventional concept, the majority of the molecules (50–75%) remained in an unoriented amorphous state at high strains. Each synthetic rubber showed a different behavior of strain‐induced crystallization and molecular orientation during extension and retraction. Our results confirmed the occurence of strain‐induced networks in the synthetic rubbers due to the inhomogeneity of the crosslink distribution. The strain‐induced networks containing microfibrillar crystals and oriented amorphous tie chains were responsible for the ultimate mechanical properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 956–964, 2004     

Terahertz time-domain spectra of aromatic carboxylic acids incorporated in nano-sized pores of mesoporous silicate.

Terahertz time-domain spectroscopy (THz-TDS) is used to study the intra- and intermolecular vibrational modes of aromatic carboxylic acids, for example, o-phthalic acid, benzoic acid, and salicylic acid, which form either intra- or intermolecular hydrogen bond(s) in different ways. Incorporating the target molecules in nano-sized spaces in mesoporous silicate (SBA-16) is found to be effective for the separate detection of intramolecular hydrogen bonding modes and intermolecular modes. The results are supported by an analysis of the differences in the peak shifts, which depend on temperature, caused by the different nature of the THz absorption. Raman spectra revealed that incorporating the molecules in the nano-sized pores of SBA-16 slightly changes the molecular structures. In the future, THz-TDS using nanoporous materials will be used to analyze the intra- and intermolecular vibrational modes of molecules with larger hydrogen bonding networks such as proteins or DNA.     

Quantitative assessment of solid oxide electrochemical doping

Quantitative analysis of metal cation doping by solid oxide electrochemical doping (SOED) has been performed under galvanostatic doping conditions. A M–β″-Al₂O₃ (M=Ag, Na) microelectrode (contact radius: about 10 μm) was used as cation source to attain a homogeneous solid–solid contact between the β″-Al₂O₃ and doping target. In Ag doping into alkali borate glass, the measured dopant amount closely matched the theoretical value. High Faraday efficiencies of above 90% were obtained. This suggests that the dopant amount can be precisely controlled on a micromole scale by the electric charge during electrolysis. On the other hand, current efficiencies of Na doping into Bi₂Sr₂CaCu₂O_y (BSCCO) ceramics depended on the applied constant current. Efficiencies of above 80% were achieved at a constant current of 10 μA (1.6 A cm⁻²). The relatively low efficiencies were explained by the saturation of BSCCO grain boundaries with Na. By contrast, excess Na was detected on the anodic surface of ceramics at a constant current of 100 μA (16 A cm⁻²). In the present study, we demonstrate that SOED enables micromole-scale control over dopant amount.     

Thermal properties and fracture toughness of a liquid‐crystalline epoxy resin cured with an aromatic diamine crosslinker having a mesogenic group

A mesogenic‐type curing agent was synthesized to introduce a mesogenic group not only into epoxy resin backbones but also into the crosslink units. In the mesogenic curing agent system, the domain size became larger, and the network arrangement in each domain existed to a greater extent than that in a system cured with the ordinary diamine curing system according to the evidence from polarized optical micrographs and polarized Fourier transform infrared mapping measurements. Moreover, the fracture toughness of the system was considerably improved. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2486–2494, 2006     

Thermoanalytical characterization of carbon/carbon hybrid material, Apple Woodceramics

Woodceramics, a carbon/carbon composite of plant-originated carbon reinforced by glassy carbon from phenolic resin, was prepared from apple pomace at carbonizing temperatures of 1073 K (AWC800) and 1473 K (AWC1200), and characterized by thermoanalytical methods and X-ray diffraction (XRD). Simultaneous differential scanning calorimetry (DSC) and thermogravimetric (TG) showed complicated overlapping reactions similar to those of coal. The initial temperature of pyrolysis was obtained by fitting logistic functions to observed TG data. The results suggested that AWC1200 contained more volatile matter than AWC800. In an inert atmosphere, complicated devolatilization takes place. In an oxidizing atmosphere, thermal change occurs roughly in four steps: desorption of physically adsorbed matter; pyrolysis into aliphatic and aromatic fragments; ignition; combustion of char. The oxidation resistance of AWC1200 was superior to AWC800.     

Remarkably large positive and negative allosteric effects on ion recognition by the formation of a novel helical pseudocryptand

In supramolecular chemistry, a great deal of attention has focused on regulating guest binding via an external stimulus. To utilize the same effector for both highly guest-selective positive and negative allosteric effects, however, stricter and more precise regulation of the host structure is required. A novel allosteric host 1 binds Fe(II) to afford the pseudocryptand, 1.Fe(II), which bears a cavity that is surrounded by three polyether chains in a helical fashion. The binding selectivity of 1 (Na+ > K+ > Rb+ > Cs+) is the opposite of 1.Fe(II) (Cs+ > Rb+ > K+ > Na+). Single-ion transport through a liquid membrane shows ion selectivity similar to the equilibrium constants. To the best of our knowledge, this is the first example of an allosteric recognition system, in which the same effector, that is, Fe(II), exhibits both large positive and negative allosteric effects on equilibrium and dynamic recognition events. The X-ray analysis and 1H NMR examination indicate that the combination of the macrobicyclic effect and the intramolecular interchain interactions (CH-pi interaction and steric hindrance) finely controls the positive and negative allosteric effects, which depend on the size of the guest. The helical framework opens a new general method for constructing more sophisticated, controllable receptors for helical biomolecules, for example, DNA and proteins, and helical molecular devices such as a molecular coil or spring responding to a stimulus.     

Synthesis of a Stimuli‐Responsive P‐Chiral Polymer with Chiral Phosphorus Atoms and Azobenzene Moieties in the Main Chain

A reaction of the P‐chiral compound (S,S)‐1,2‐bis(boranato(tert‐butyl)methylphosphino)ethane with an azobenzene derivative gave stimuli‐responsive polymers with P‐chiral phosphines in the main chain. This is the first example of a stimuli‐responsive P‐chiral polymer. The polymer isomerized from the trans to the cis form upon UV irradiation and reverted to the trans form reversibly. The polymer was able to coordinate to platinum, and the resulting polymer complex exhibited the Cotton effect owing to the chirality of the phosphorus atoms. The structure of the P‐chiral polymer obtained could be changed reversibly by light and thermal stimuli, and the polymer chain was induced to rotate helically when complexed with transition metals through the chiral phosphorus atoms.     

Thermosensitive biodegradable polydepsipeptide

A poly(N-isopropylacrylamide) (PNIPAAm)-like biodegradable thermosensitive polydepsipeptide, poly[Glc-Asn(N-isopropyl)], was synthesized by introducing an isopropyl amide group into poly[Glc-Asn]. Poly[Glc-Asn(N-isopropyl)] was degraded in vitro by cleavage of the ester bonds in the main chain in water at room temperature. The non-toxic nature of the polymer and its degradation products, coupled with a cloud point at 29 degrees C in water, make this polymer attractive for biomedical implant applications.     

Synthesis of acryloyl-type polymer fixing 5-fluorouracil residues through D-glucofuranoses and its antitumor activity

Acryloyl-type polymer fixing 1-β-carbonylethyl-5-fluorouracil residues through D -glucofuranoses via ester bonds was synthesized by means of polymerization of the corresponding monomer and polymer reaction. In order to provide the water-soluble objective polymer, the copolymerization of the acryloyl-type monomer with acrylamide was carried out. The extent of release of 5-FU residues from the copolymer was investigated in the enzyme or nonenzyme system in vitro. Furthermore, the antitumor activities of the water-insoluble homopolymer and water-soluble copolymer obtained were tested in vivo.