Novel molecularly imprinted polymer using 1-(α-methyl acrylate)-3-methylimidazolium bromide as functional monomer for simultaneous extraction and determination of water-soluble acid dyes in wastewater and soft drink by solid phase extraction and high performance liquid chromatography

Novel water-compatible molecularly imprinted polymers were synthesized in methanol-water systems with Tratarzine as template and 1-(α-methyl acrylate)-3-methylimidazolium bromide (1-MA-3MI-Br) as functional monomer, which has π-π hydrophobic, hydrogen-bonding and electrostatic interactions with template molecule. 1-MA-3MI-Br molecularly imprinted polymers (1-MA-3MI-Br-MIPs) were used as selective sorbents for the solid-phase extraction (SPE) of water-soluble acid dyes from wastewater and soft drink. The good linearity of the method was obtained in a range of 5.0-2000 μg/L with the correlation coefficient of > 0.999. The detection limits were in a range of 0.13-0.51 μg/L for the water-soluble acid dyes in wastewater and 0.095-0.84 μg/L for those in soft drink. The mean recoveries for the acid dyes are from 89.1% to 101.0% in spiked wastewater and 91.0-101.3% in spiked soft drink. Compared with strongly anion exchange solid phase extraction (SAX-SPE), mixture anion exchange solid phase extraction (MAX-SPE), and 1-MA-3MI-Br non-imprinted solid phase extraction (1-MA-3MI-Br-NISPE), almost all of the matrix interferences were removed by 1-MA-3MI-Br-MISPE, exhibiting higher selectivity, recovery and enrichment ability for the acid dyes and better baselines in the results of HPLC analysis.     

High-selectively determination of nitric oxide on nanoporous gold electrode

Journal of Solid State Electrochemistry - Here, a nanoporous gold electrode (NAu) was reported with a unique cone-shape nanohole structure for electrochemical sensing of nitric oxide (NO), which...     

Nonvolatile bipolar resistance switching effects in multiferroic BiFeO3 thin films on LaNiO3-electrodized Si substrates

We report on reversible bipolar resistance switching effects in multiferroic BiFeO₃ thin films without electroforming. The BiFeO₃ thin films with (110) preferential orientation were prepared on LaNiO₃-electrodized Si substrates with a Pt/BiFeO₃/LaNiO₃ device configuration. The resistance ratio of high resistance state (HRS) to low resistance state (LRS) of the devices was as high as three orders of magnitude. The dominant conduction mechanisms of LRS and HRS were dominated by ohmic behavior and trap-controlled space charge limited current, respectively. The resistance switching mechanism of the devices was discussed using a modified Schottky-like barrier model taking into account the movement of oxygen vacancies.     

过渡金属氮化物在锂离子电池中的应用

锂离子电池因其卓越的性能已成为当前使用最广泛的二次电池。过渡金属氮化物因具有低而平的充放电电位平台、可逆性能好与容量大等特点,被广泛应用于锂离子电池负极材料。本文简要综述了过渡金属氮化物在锂离子电池中的应用现状和研究进展。重点介绍了过渡金属氮化物及其复合物的物理和化学制备方法及其在锂离子电池中的应用研究进展,并且指出过渡金属氮化物应用于锂离子电池中目前面临的问题以及相应解决方案。     

A magnetic copper(II)-imprinted polymer for the selective enrichment of trace copper(II) ions in environmental water

We have developed a convenient, selective and reliable method for the rapid enrichment of trace quantities of Cu(II) by using a magnetic Cu(II) ion-imprinted polymer. This is followed by their determination by FAAS. The imprints were prepared by using (a) Cu(II) ions as the template, (b) 3-aminopropyltriethoxysilane as both the functional monomer and the crosslinking agent, and (c) Fe₃O₄ as the magnetic component. Enrichment is carried out in a single step, and adsorbed copper ions can be separated from the sample solution by applying a strong magnet. The effects of pH, elution condition, amount of imprint, and of potentially interfering ions were evaluated. Under the optimal conditions, the detection limit and enrichment factor are 0.3?μg L^?1 and 100, respectively, and the recovery is >95?%. The procedure was successfully applied in the enrichment and detection of trace copper ions in environmental water.

Colossal resistive switching behavior and its physical mechanism of Pt/<Emphasis Type="Italic">p</Emphasis>-NiO/<Emphasis Type="Italic">n</Emphasis>-Mg<Subscript>0.6</Subscript>Zn<Subscript>0.4</Subscript>O/Pt thin films

A heterojunction structure of p-NiO/n-Mg_0.6Zn_0.4O with an aim to tuning or improving the resistive switching properties was fabricated on Pt/TiO₂/SiO₂/Si substrates by the sol-gel spin-coating technique. The Pt/NiO/Mg_0.6Zn_0.4O/Pt heterojunction thin-film device shows excellent resistive switching properties, such as a reduced threshold current of 1 μA for device initiation, a small dispersion of reset voltage ranging from 0.54 to 0.62 V, long retention time and a high resistance ratio of high-resistance state to low-resistance state about six orders of magnitude. These results indicate that the resistive switching properties can be greatly improved by constructing the p-NiO/n-Mg_0.6Zn_0.4O heterojunction for nonvolatile memory applications. The physical mechanism responsible for colossal resistive switching properties of the heterojunction was analyzed based on interfacial defect effect and formation and rapture of conductive filaments.     

A longitudinal (1−x)Pb(Mg1/3Nb2/3)O3-xPbTiO3 single-crystal piezoelectric transformer

In present work, a simple longitudinal piezoelectric transformer with the size of 16-mm length, 2-mm width, and 2-mm thickness was designed and fabricated with relaxor ferroelectric single-crystal (1−x)Pb(Mg_1/3Nb_2/3)O₃-xPbTiO₃. Both the input and output parts utilized the ultrahigh longitudinal extensional electromechanical coupling coefficients. Compared to the Rosen-type transformer, this transformer has the advantages of smaller-size, simpler structure, no spurious vibration, and no acoustic mismatch between the input and output parts. The electrical measurement results indicated that under the resonance frequency of 114 kHz, a step-up voltage of about 30 can be obtained under a 10-MΩ load resistance, which agreed well with the calculated results. Besides, the frequency and load dependences of this transformer were also systematically studied and discussed. The results indicated that this transformer has potential applications in the small-size high-voltage amplifier and magnetoelectric/piezoelectric-transformer composite transducers.     

Oxygen-vacancy-rich phenanthroline/TiO2 nanocomposites: An integrated adsorption,detection and photocatalytic material for complex pollutants remediation

To address the challenge of treating complex pollutants containing heavy metals and organic compounds,a phenanthroline/TiO₂ nanocomposite with rich oxygen vacancy defects was synthesized to integrate the functions of pollutant detection, adsorption, and photocatalytic degradation. The results showed that the nanocomposite could adsorb Cr³⁺and the process could be transduced into a colorimetric signal for qualitative and quantitative detection. The adsorbed heavy metal also ...     

Effect of ultrasound on sodium arsenate induction time and crystallization property during solution crystallization processes

The effect of ultrasound vibrations on the cooling crystallization of sodium arsenate in supersaturated solutions was investigated. In particular, the effects of ultrasound vibrations on induction time and crystal size distribution were studied using a laser-based apparatus with relative supersaturation ranging from 1.3 to 1.8. The results show that ultrasound vibrations have a significant effect on reducing induction time and crystal size distribution. The application of ultrasound vibrations to the system resulted in a small change in surface tension; however, the induction time and crystal size significantly decreased. The mean size of sodium arsenate crystals decreased from 398.87 ± 3.27 to 168.68 ± 2.07 μm, as the ultrasound power increases from 26 to 130 W. Ultrasound vibrations significantly reduced the induction time in a highly supersaturated solution compared to that in a low supersaturated solution.     

Electroanalysis of Bisphenol A at a Multiwalled Carbon Nanotubes‐gold Nanoparticles Modified Glassy Carbon Electrode

A sensitive electrochemical method was developed for the determination of bisphenol A (BPA) at a glassy carbon electrode (GCE) modified with a multiwalled carbon nanotubes (MWCNTs)‐gold nanoparticles (GNPs) hybrid film, which was prepared based on the electrostatic interaction between positively charged cetyltrimethylammonium bromide (CTAB) and negatively charged MWCNTs and GNPs. The MWCNT‐GNPs/GCE exhibited an enhanced electroactivity for BPA oxidation versus unmodified GCE and MWCNTs/GCE. The experimental parameters, including the amounts of modified MWCNTs and GNPs, the pH of the supporting electrolyte, scan rate and accumulation time, were examined and optimized. Under the optimal conditions, the differential pulse voltammetric anodic peak current of BPA was linear with the BPA concentration from 2.0×10^?8 to 2×10^?5 mol L^?1, with a limit of detection of 7.5 nmol L^?1. The proposed procedure was applied to determine BPA leached from real plastic samples with satisfactory results.