Chemical diversity and anti-acne inducing bacterial potentials of essential oils from selected Elsholtzia species

Essential oils from the aerial parts of four Elsholtzia species; Elsholtzia stachyodes, Elsholtzia communis, Elsholtzia griffithii and Elsholtzia beddomei were obtained by steam distillation and their chemical components were analysed by gas chromatography-mass spectrometry (GC-MS). Principle Component Analysis was used to identify the chemical variations in the essential oils from these plants, which could be categorised into two groups according to their main chemical components which are acylfuran derivatives and oxygenated monoterpenes. Additionally, the anti-acne inducing bacterial activity against Staphylococcus aureus and Staphylococcus epidermidis were evaluated. The oil from E. stachyodes was the most efficacious against the growth of S. aureus and S. epidermidis having MIC values of 0.78 and 1.56 μL/mL, respectively, and exhibited five times more effective than erythromycin (standard antibiotic).     

Portable microfluidic system for determination of urinary creatinine

A simple, low cost and portable microfluidic system based on a two-point alkaline picrate kinetic reaction has been developed for the determination of urinary creatinine. The creatinine reacts with picric acid under alkaline conditions, forming an orange-red colour, which is monitored on PDMS microchip using a portable miniature fibre optic spectrometer at 510 nm. A linear range was displayed from 0 to 40 mg L⁻¹ creatinine (r² = 0.997) with a detection limit of 3.3 mg L⁻¹ (S/N = 3). On-chip absorbance signals are reproducible, with relative standard deviations (RSDs) of 7.1%, when evaluated with 20 mg L⁻¹ creatinine (n = 10). The standard curves in which the intra-run CVs (4.7-6.8%) and inter-run CVs (7.9%) obtained were performed on three different days and exhibited good reproducibility. The method was highly correlated with the conventional spectrophotometric method when real urine samples were evaluated (r² = 0.948; n = 15).     

Effect of Precipitation Temperature and Number of Iron Atoms per Molecule on the Structure of Hydrated Iron(III) Oxyhydroxide Ferritin Cores Synthesised in vitro

Hyperfine Interactions - Horse spleen apoferritin was reconstituted with varying numbers of iron atoms per protein shell at 25 and 50°C. Samples with mean particle sizes ranging from...     

Bi-exponential proton transverse relaxation rate (R2) image analysis using RF field intensity-weighted spin density projection: potential for R2 measurement of iron-loaded liver

A bi-exponential proton transverse relaxation rate (R(2)) image analysis technique has been developed that enables the discrimination of dual compartment transverse relaxation behavior in systems with rapid transverse relaxation enhancement. The technique is particularly well suited to single spin-echo imaging studies where a limited number of images are available for analysis. The bi-exponential R(2) image analysis is facilitated by estimation of the initial proton spin density signal within the region of interest weighted by the RF field intensities. The RF field intensity-weighted spin density map is computed by solving a boundary value problem presented by a high spin density, long T(2) material encompassing the region for analysis. The accuracy of the bi-exponential R(2) image analysis technique is demonstrated on a simulated dual compartment manganese chloride phantom system with relaxation rates and relative population densities between the two compartments similar to the bi-exponential transverse relaxation behavior expected of iron loaded liver. Results from analysis of the phantoms illustrate the potential of bi-exponential R(2) image analysis with RF field intensity-weighted spin density projection for quantifying transverse relaxation enhancement as it occurs in liver iron overload.     

Synchrotron XANES and ED‐XRF analyses of fine‐paste ware from 13th to 14th century maritime Southeast Asia

The combination of energy dispersive X‐ray fluorescence (ED‐XRF) and synchrotron X‐ray absorption near‐edge structure (XANES) provides the detailed composition of fine‐paste ware (FPW) kendis, dated back to 13th–14th century maritime Southeast Asia. Sources of clay and production sites were classified according to Al₂O₃, SiO₂, α‐Fe₂O₃ and γ‐Fe₂O₃ as well as trace elements. The similarities based on these components provided another evidence of a trade route between Kota Cina in North Sumatra of Indonesia and Kok Moh on Satingphra Peninsula, a well‐known production area in present‐day Thailand. In additions, the uniquely large contribution of α‐Fe₂O₃ in XANES spectra suggests that Nakhon Si Thammarat province of Thailand could also be one of FPW production areas in maritime Southeast Asia. Copyright © 2017 John Wiley & Sons, Ltd.     

Blood separation on microfluidic paper-based analytical devices

A microfluidic paper-based analytical device (μPAD) for the separation of blood plasma from whole blood is described. The device can separate plasma from whole blood and quantify plasma proteins in a single step. The μPAD was fabricated using the wax dipping method, and the final device was composed of a blood separation membrane combined with patterned Whatman No.1 paper. Blood separation membranes, LF1, MF1, VF1 and VF2 were tested for blood separation on the μPAD. The LF1 membrane was found to be the most suitable for blood separations when fabricating the μPAD by wax dipping. For blood separation, the blood cells (both red and white) were trapped on blood separation membrane allowing pure plasma to flow to the detection zone by capillary force. The LF1-μPAD was shown to be functional with human whole blood of 24-55% hematocrit without dilution, and effectively separated blood cells from plasma within 2 min when blood volumes of between 15-22 μL were added to the device. Microscopy was used to confirm that the device isolated plasma with high purity with no blood cells or cell hemolysis in the detection zone. The efficiency of blood separation on the μPAD was studied by plasma protein detection using the bromocresol green (BCG) colorimetric assay. The results revealed that protein detection on the μPAD was not significantly different from the conventional method (p > 0.05, pair t-test). The colorimetric measurement reproducibility on the μPAD was 2.62% (n = 10) and 5.84% (n = 30) for within-day and between day precision, respectively. Our proposed blood separation on μPAD has the potential for reducing turnaround time, sample volume, sample preparation and detection processes for clinical diagnosis and point-of care testing.     

Synthesis and Characterization of UV-Curable Poly(dimethylsiloxane) Dimethacrylate

This paper presents a new route to the synthesis of UV-curable poly(dimethylsiloxane) dimethacrylate (PDMSDMA). PDMSDMA was essentially prepared by modification of poly(dimethylsiloxane), bis(3-aminopropyl) terminated (PDMS-NH₂) with methacrylic anhydride (MAA). The synthesized products were cured under UV in the presence of camphorquinone (CQ) used as a photoinitiator. The chemical structure of PDMSDMA samples was analyzed by FT-IR and ¹H-NMR spectroscopy. The ¹H-NMR spectrum of PDMSDMA revealed new peaks at 3.20 ppm, corresponding to methylene protons in  CH₂ NH , and 5.25 and 5.65 ppm, corresponding to vinylic protons in  NH CO CCH₃CH₂. The chemical structure of the cured products and the degree of curing were determined by solid state ¹³C CP/MAS NMR and FT-IR (Micro-ATR) spectroscopy. Various parameters, such as concentration of methacrylic anhydride, amount of camphorquinone, and curing time, were studied.     

Synthesis and Characterization of Amino Acid Modified Chitooligosaccharides

Amino acid modified chitooligosaccharides were synthesized by the new synthetic route. The chloroacetyl-chitooliogosaccharide intermediates were prepared under a mild condition via a reaction between chitooligosaccharide (COS) and chloroacetic anhydride. The intermediates were subsequently reacted with a variety of amino acids, e.g., glycine, aspartic acid, alanine, arginine, and serine, under a basic condition, yielding amino acid modified COS products. The degree of chloroacetylation was calculated based on new ¹H NMR absorption peaks at 3.80 and 3.94 ppm, corresponding to  NH CO CH₂ Cl and  O CO CH₂ Cl, respectively. The degrees of chloroacetylation determined were 0.40, 0.44, 0.62, and 0.93 when the mole ratios of chloroacetic anhydride to COS were 0.5, 1, 2, and 4, respectively. The chemical structures of the COS derivatives were also determined using ¹H NMR spectroscopy. The biological properties of the derivatives were evaluated. Cytotoxicity of the derivatives was assessed by a direct contact, using L929 cells. An MTT assay was a method of choice to evaluate the efficacy of the derivatives to enhance the proliferation of L929 cells.     

Highly sensitive determination of cadmium and lead using a low-cost electrochemical flow-through cell based on a carbon paste electrode

A low-cost thin-layer electrochemical flow-through cell based on a carbon paste electrode (CPE), was constructed for the highly sensitive determination of cadmium(II) (Cd(2+)) and lead(II) (Pb(2+)) ions. The sensitivity of the proposed cell for Cd(2+) and Pb(2+) ion detection was improved by using the smallest channel height without the need for any complicated electrode modification. Under the optimum conditions, the detection limits of Cd(2+) and Pb(2+) ions (0.08 and 0.07 μg dm(-3), respectively) were 13.8- and 11.4-fold lower than that of a commercial flow cell (1.1 and 0.8 μg dm(-3), respectively). Moreover, the percentage recoveries of Cd(2+) and Pb(2+) for the in-house designed thin-layer flow cell were higher than those for the commercially available cell in all tested water samples, and within the acceptable range. The proposed flow cell is promising as an inexpensive and alternative one for the highly sensitive monitoring of heavy metal ions.