Surface characterization and radical decay studies of oxygen plasma‐treated PMMA films

Polymethylmethacrylate (PMMA) films were modified by RF oxygen plasma with various powers applied for different periods, and the effects of these parameters on the surface properties such as hydrophilicity, surface free energy (SFE), chemistry, and topography were investigated by water contact angle, goniometer, X‐ray photoelectron spectroscopy (XPS), and atomic force microscopy, and the types of the created free radicals and their decay were detected by electron spin resonance spectroscopy (ESR). SFE and contact angle results varied depending on the plasma parameters. Oxygen plasma treatment (100 W–30 min) enhanced the hydrophilicity of PMMA surface as shown by decreasing the water contact angle from 70° to 26°. XPS analysis showed the change in the amounts of the present functionalities as well as formation of new groups as free carbonyl and carbonate groups. The roughness of the surface increased considerably from ~2 nm to ~75 nm after 100 W–30 min oxygen plasma treatment. ESR analysis indicated the introduction of peroxy radicals by oxygen plasma treatment, and the intensity of the radicals increased with increasing the applied power. Significant decrease in radical concentration was observed especially for the samples treated with higher powers when the samples were kept under the atmospheric conditions. As a conclusion, RF plasma, causes changes in the chemical and physical properties of the materials depending on the applied parameters, and can be used for the creation of specific groups or radicals to link or immobilize active molecules onto the surface of a material. Copyright © 2012 John Wiley & Sons, Ltd.     

Covalent immobilization of invertase on chemically activated poly(2-hydroxyethyl methacrylate) microbeads

Properties of invertase immobilized on poly(2-hydroxyethyl methacrylate) microbeads activated by epichlorohydrin or cyanuric chloride were studied. After 20 repeated uses for 3 days, the activity of the immobilized enzyme was 92–93%. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1793–1797, October, 2006.     

3D Plotted PCL Scaffolds for Stem Cell Based Bone Tissue Engineering

The ability to control the architecture and strength of a bone tissue engineering scaffold is critical to achieve a harmony between the scaffold and the host tissue. Rapid prototyping (RP) technique is applied to tissue engineering to satisfy this need and to create a scaffold directly from the scanned and digitized image of the defect site. Design and construction of complex structures with different shapes and sizes, at micro and macro scale, with fully interconnected pore structure and appropriate mechanical properties are possible by using RP techniques. In this study, RP was used for the production of poly(ε-caprolactone) (PCL) scaffolds. Scaffolds with four different architectures were produced by using different configurations of the fibers (basic, basic-offset, crossed and crossed-offset) within the architecture of the scaffold. The structure of the prepared scaffolds were examined by scanning electron microscopy (SEM), porosity and its distribution were analyzed by micro-computed tomography (µ-CT), stiffness and modulus values were determined by dynamic mechanical analysis (DMA). It was observed that the scaffolds had very ordered structures with mean porosities about 60%, and having storage modulus values about 1 × 10⁷ Pa. These structures were then seeded with rat bone marrow origin mesenchymal stem cells (MSCs) in order to investigate the effect of scaffold structure on the cell behavior; the proliferation and differentiation of the cells on the scaffolds were studied. It was observed that cell proliferation was higher on offset scaffolds (262000 vs 235000 for basic, 287000 vs 222000 for crossed structure) and stainings for actin filaments of the cells reveal successful attachment and spreading at the surfaces of the fibers. Alkaline phosphatase (ALP) activity results were higher for the samples with lower cell proliferation, as expected. Highest MSC differentiation was observed for crossed scaffolds indicating the influence of scaffold structure on cellular activities.     

Surface Modification of Polyurethanes with Covalent Immobilization of Heparin

Thrombus formation and blood coagulation is a major problem associated with blood contacting products such as catheters, vascular grafts, arteries, artificial hearts and heart valves. An intense research is being conducted towards the synthesis of new hemocompatible materials and modifications of surfaces with biological molecules. In this study, polyurethane (PU) films were synthesized in medical purity from diisocyanate and polyol without using any other ingredients and their surfaces were modified by covalent immobilization of heparin. Two types of heparin, unfractionated (UFH) and low molecular weight heparin (LMWH), were immobilized to investigate their effect on cell adhesion. The surface properties of the modified PUs were examined with ESCA, ATR-FTIR and AFM. ESCA results demonstrated sulfur peaks indicating the presence of heparin and AFM results showed the alteration of surface structure after coating with heparin. Cell adhesion studies were conducted with heparinized whole human blood. The surfaces of the UFH immobilized films resulted in lesser red blood cell adhesion in comparison to LMWH demonstrating strong anti-thrombogenic activity of the latter.     

Influence of Oxygen Plasma Modification on Surface Free Energy of PMMA Films and Cell Attachment

For any biomaterial placed into a biological medium, the surface properties of the material, such as porosity, crystallinity, presence and distribution of electrical charge and functional groups are very critical parameters that determine the acceptance or rejection of the material. Applications, especially tissue engineering require some surface modifications at the molecular level without disturbing the bulk properties of the implants in order to enhance the cell attachment on the material. An appropriate technique is the application of glow discharge plasma which employs no solvents, takes place at ambient temperatures, and alterations take place only at the surface by changing the surface chemistry along with surface free energy (SFE) and efficiency for cell-material interaction. In this study, poly(methyl methacrylate) (PMMA) film surfaces were modified with oxygen plasma. SFE and its dispersive and polar (acidic-basic) components of the modified surfaces were calculated by means of several theoretical approaches including geometric mean, harmonic mean and acid-base equations. The relation between SFE and its dispersive and polar components and cell attachment on surfaces were studied. The highest 3T3 cell attachment was obtained for the surface with the total SFE of 61.77 mJ/m² and polar component of 50.91 mJ/m² according to Geometric mean. The total SFE of this surface was calculated to be 61.06 mJ/m² and the polar component as 40.96 mJ/m² using the Harmonic mean method.     

Acrylic-based high internal phase emulsion polymeric monolith for capillary electrochromatography

The use of high internal phase emulsion polymers (polyHIPEs) for CEC applications has remained relatively unexplored. A few reports exist in the literature for the preparation of similar structures. In this study, polyHIPEs having high porosity, and interconnected open-cell structure, were introduced and evaluated as stationary phase for CEC. The polyHIPE monolithic columns were prepared by the in situ polymerization of isodecylacrylate (IDA) and divinylbenzene (DVB) in the continuous phase of a high internal phase emulsion (HIPE). Due to its well-defined polyHIPE structure with interconnected micron size spherical voids, the columns synthesized with different initiator concentrations were successfully used for the separation of alkylbenzenes. Furthermore, the columns indicated a strong electroosmotic flow (EOF) without any additional EOF generating monomer probably due to the presence of ionizable sulfate groups coming from the water-soluble initiator used in the preparation of polyHIPE matrix. The best chromatographic performance in the separation of alkylbenzenes was achieved by using 70% ACN in the mobile phase with high column efficiency (up to 200 000 plates/m).