PRESSURE-VELOCITY EQUILIBRIUM HYDRODYNAMIC MODELS

This article describes mathematical models for phase separated mixtures of materials that are in pressure and velocity equilibrium but not necessarily temperature equilibrium. General conditions for constitutive models for such mixtures that exhibit a single mixture sound speed are discussed and specific examples are described.     

Effect of Pr-Ca substitution on the transport and magnetic behavior of LaMnO3 perovskite

The effect of simultaneous substitution of a fluctuating cation and a divalent cation in LaMnO₃ perovskite modifies the properties of the material to exhibit large valence colossal magnetoresistance (CMR) effect. A good example of these properties is (La_1−2x Pr _x Ca _x )MnO₃ (LPCMO) type CMR material. In this communication it is reported that, with the increase in x (for x=0.1, 0.15, 0.2), the T _c varies between 100 and 120 K with improvisation in metal-insulator transition. Interestingly, resistance increases with x from few hundred ohms to few kilo ohms with corresponding decrease in the unit cell volume. The results of the studies using X-ray diffraction (XRD), electrical resistivity, magnetoresistance and ac susceptibility measurements on LPCMO samples for understanding the structural, transport and magnetic properties are discussed in detail.     

Two new eudesmane derivatives from Verbesina virginica

<正>Two new eudesmane derivatives were isolated from the leaves and flowers of Verbesina virginica,along with the known 6-O-β-E -p-coumaroyl-4α-hydroxyeudesmane(1).Their structures were determined as 6-O-β-Z-p-coumaroyl-4α-hydroxyeudesmane(2) and 6-O-α-E-p-coumaroyl-1β-4α-dihydroxyeudesmane(3) by spectroscopic methods.     

Internal energy content of n-butylbenzene, bromobenzene, iodobenzene and aniline molecular ions generated by two-photon ionization at 266 nm. A photodissociation study

A technique to investigate photodissociation kinetics on a nanosecond time scale has been devised for molecular ions generated by multiphoton ionization (MPI) using mass-analyzed ion kinetic energy spectrometry. The branching ratio or rate constant has been determined for the photodissociation of the n-butylbenzene, bromobenzene, iodobenzene, and aniline molecular ions generated by MPI at 266 nm. The ion internal energies have been estimated by comparing the measured kinetic data with the previous energy dependence data. The analysis has shown that only those molecular ions generated by two-photon ionization contribute to the photodissociation signals. Around half of the available energy has been found to remain as molecular ion internal energy in the two-photon ionization process. Copyright 1999 John Wiley & Sons, Ltd.     

First-principles theoretical analysis of silyl radical diffusion on silicon surfaces

We report results from a detailed analysis of the fundamental radical precursor diffusion processes on silicon surfaces and discuss their implications for the surface smoothness of hydrogenated amorphous silicon (a-Si:H) thin films. The analysis is based on a synergistic combination of first-principles density functional theory (DFT) calculations of SiH(3) radical migration on the hydrogen-terminated Si(001)-(2 x 1) surface with molecular-dynamics (MD) simulations of SiH(3) radical precursor migration on surfaces of a-Si:H films. Our DFT calculations yield activation energies for SiH(3) migration that range from 0.18 to 0.89 eV depending on the local electronic environment on the Si(001)-(2 x 1):H surface. In particular, when no substantial surface relaxation (Si-Si bond breaking or formation) accompanies the hopping of the SiH(3) radical the activation barriers are highest, whereas hopping between nearest-neighbor overcoordinated surface Si atoms results in the lowest radical diffusion barrier of 0.18 eV; this low barrier is consistent with the activation barrier for SiH(3) migration through overcoordinated sites on the a-Si:H surface. Specifically, the analysis of the MD simulations of SiH(3) radical migration on a-Si:H surfaces yields an effective diffusion barrier of 0.16 eV, allowing for the rapid migration of the SiH(3) radical prior to its incorporation in surface valleys; rapid migration and subsequent incorporation constitute the two-step mechanism responsible for the smoothness of plasma deposited a-Si:H thin films.     

Mechanisms and energetics of hydride dissociation reactions on surfaces of plasma-deposited silicon thin films

We report results from a detailed analysis of the fundamental silicon hydride dissociation processes on silicon surfaces and discuss their implications for the surface chemical composition of plasma-deposited hydrogenated amorphous silicon (a-Si:H) thin films. The analysis is based on a synergistic combination of first-principles density functional theory (DFT) calculations of hydride dissociation on the hydrogen-terminated Si(001)-(2x1) surface and molecular-dynamics (MD) simulations of adsorbed SiH(3) radical precursor dissociation on surfaces of MD-grown a-Si:H films. Our DFT calculations reveal that, in the presence of fivefold coordinated surface Si atoms, surface trihydride species dissociate sequentially to form surface dihydrides and surface monohydrides via thermally activated pathways with reaction barriers of 0.40-0.55 eV. The presence of dangling bonds (DBs) results in lowering the activation barrier for hydride dissociation to 0.15-0.20 eV, but such DB-mediated reactions are infrequent. Our MD simulations on a-Si:H film growth surfaces indicate that surface hydride dissociation reactions are predominantly mediated by fivefold coordinated surface Si atoms, with resulting activation barriers of 0.35-0.50 eV. The results are consistent with experimental measurements of a-Si:H film surface composition using in situ attenuated total reflection Fourier transform infrared spectroscopy, which indicate that the a-Si:H surface is predominantly covered with the higher hydrides at low temperatures, while the surface monohydride, SiH((s)), becomes increasingly more dominant as the temperature is increased.     

Simultaneous determination of dimethoate and its metabolite omethoate in curry leaf using LC-MS/MS and risk assessment

This study presents the method development, validation, and simultaneous determination of dimethoate and its metabolite omethoate in curry leaf. Samples were extracted following modified quick, easy, cheap, effective, rugged, and safe extraction protocol and analyzed using liquid chromatography-tandem mass spectrometry. The limit of quantification in the matrix was 0.005 μg g⁻¹ for dimethoate and omethoate. Extraction using acetonitrile recorded the average recoveries in the range of 82.25 to 112.97% for dimethoate and 85.57 to 107.22% for omethoate at 0.005, 0.025 and 0.050 μg g⁻¹ fortification levels and relative standard deviation less than 5%. Similarly, the relative standard deviation values for intraday (Repeatability) and interday (Reproducibility) tests were less than 15%. Dissipation kinetics of dimethoate 30% emulsifiable concentrate at 200 and 400 g a.i h⁻¹ recorded initial deposits of 5.20 and 10.05 μg g⁻¹ and 0.33 and 0.48 μg g⁻¹ for dimethoate and omethoate, respectively, and half-life of 3.07 and 3.34 days. The estimated hazard index value found more than one at a day after dimethoate application. It is not safe for consumer health to use curry leaves in the initial days after application.