静止轨道星载差分吸收光谱仪CCD成像系统设计

静止轨道卫星差分吸收光谱仪采用摆扫成像方式对大气进行探测,针对其工作时CCD成像系统信噪比大于1 000、高速探测模式下探测周期小于10min、高分辨率模式下探测周期小于1h的要求,进行CCD成像系统设计.选取CCD47-20作为探测器,设计成像电路实现光谱图像信号的采集和上传.分析了帧叠加和像元合并对时间、空间分辨率的影响.结合帧转移CCD的特点设计了每个位置最后一帧读出时摆镜转动的成像方式,并合理设置了帧叠加数和像元合并数,达到优化成像周期的目的.1s曝光时间条件下,该CCD成像系统的高速、高分辨率模式探测周期分别为515s和3 315s,图像信噪比均大于1 000,污染物观测实验中未出现失帧或重复的现象.该CCD成像系统方案满足静止轨道星载差分吸收光谱仪的探测需求,为静止轨道环境监测仪器设计提供参考.     

第一类永动机幻梦的破灭

介绍了13~18世纪物理学史和科技史上曾名噪一时的第一类永动机的设计方案的破灭.第一类永动机幻梦破灭的历史引起了人们的反思与启示,有力地促进了19世纪中叶能量转化和守恒定律的确立.     

Hydrodynamic Properties of Fe3O4 Kerosene-Based Ferrofluids with Narrow Particle Size Distribution

We investigate the hydrodynamic properties of Fe3O4 kerosene-based ferrofluids with narrow particle size distribution. The ferrofluids are synthesized by improving chemical coprecipitation technique. A narrow distribution of 8.6-10.8nm particle sizes is obtained from the magnetization curve with the free-form model based on the Bayesian inference theory. The fitting result is consistent with average particle size obtained from x-ray diffraction. With the increase of applied magnetic field and magnetic particle concentration, apparent viscosity of ferrofluids increases. At concentration 4.04%, the type of flow for the ferrofluid transforms from Newtonian to Bingham plastic fluid as the applied magnetic field increases.     

Properties of nonparametric estimators of autocovariance for stationary random fields

Summary We introduce nonparametric estimators of the autocovariance of a stationary random field. One of our estimators has the property that it is itself an autocovatiance. This feature enables the estimator to be used as the basis of simulation studies such as those which are necessary when constructing bootstrap confidence intervals for unknown parameters. Unlike estimators proposed recently by other authors, our own do not require assumptions such as isotropy or monotonicity. Indeed, like nonparametric function estimators considered more widely in the context of curve estimation, our approach demands only smoothness and tail conditions on the underlying curve or surface (here, the autocovariance), and moment and mixing conditions on the random field. We show that by imposing the condition that the estimator be a covariance function we actually reduce the numerical value of integrated squared error.     

Dislocation unpinning model of acoustic emission from alkali halide crystals

The present paper reports the dislocation unpinning model of acoustic emission (AE) from alkali halide crystals. Equations are derived for the strain dependence of the transient AE pulse rate, peak value of the AE pulse rate and the total number of AE pulse emitted. It is found that the AE pulse rate should be maximum for a particular strain of the crystals. The peak value of the AE pulse rate should depend on the volume and strain rate of the crystals, and also on the pinning time of dislocations. Since the pinning time of dislocations decreases with increasing strain rate, the AE pulse rate should be weakly dependent on the strain rate of the crystals. The total number of AE should increase linearly with deformation and then it should attain a saturation value for the large deformation. By measuring the strain dependence of the AE pulse rate at a fixed strain rate, the time constantτ _s for surface annihilation of dislocations and the pinning timeτ _p of the dislocations can be determined. A good agreement is found between the theoretical and experimental results related to the AE from alkali halide crystals.     

某些查耳酮化合物的发光

本文叙述了两个同质查耳酮系列的合成.一个带有查耳酮中心链(系列Ⅰ),另一个是系列Ⅰ的酯类(系列Ⅱ).研究了每个系列中三种化合物的发光,发现两个系列的所有化合物都能见到发光.系列Ⅰ中的化合物在峰值为360nm处可见到发光,而系Ⅱ列中的化合物未能观测到这一波长的发光.然而,在峰值为470nm处两者均可见到发光.得出的结论是,消除非键电子微扰作用的氢键是系列Ⅰ中的化合物在360nm处出现发光的原因.     

探讨Abel积分零点的一个定理

本文研究了具有中心环域的可积多项式系统,探讨此系统在用多项式进行微扰的情况下,其所对应的Abel积分的零点个数的计算方法,给出了一个较为实用的定理,并举出了若干个应用的例子．     

基于发光二极管探测器的太阳光度计的研究

介绍了一种采用商用发光二极管作为探测器的新型太阳光度计。阐述了系统的结构以及该仪器在监测气溶胶光学厚度领域的应用,并与传统的太阳光度计进行了对比试验。试验表明,两种仪器具有很好的一致性。     

Vinyl‐type polymerization of norbornene by nickel(II) bisbenzimidazole catalysts

Novel nickel(II) bisbenzimidazole complexes were prepared via a three‐step synthetic procedure consisting of aniline/diacid condensation, ligand N‐alkylation, and metal complexation. The complexes were characterized by X‐ray crystallography and found to possess a pseudotetrahedral geometry. Upon activation with methylaluminoxane, these nickel bisbenzimidazoles did not polymerize simple olefins (e.g., ethylene, propylene, and 1‐butene) but were found to carry out the rapid and efficient polymerization of norbornene. The polynorbornene products were characterized by gel permeation chromatography/light scattering, ¹³C NMR, and IR, and their Mark–Houwink and dn/dc parameters were determined. The molecular weights of the polynorbornenes were very high (weight‐average molecular weight = 587,000–797,000 g/mol). ¹³C NMR suggested that the polymerization occurred via vinyl addition (i.e., a 2,3‐linked polymer); no ring‐opened product was observed. Thermogravimetric analysis indicated that the polynorbornenes were stable up to 400 °C under nitrogen. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2095–2106, 2003