Synthesis,crystal structure and magnetic properties of a new tri‐nuclear iron (II,III) complex,a precursor for the preparation of superparamagnetic Fe3O4 nanoparticles applicable in the removal of Cd2+

This study reports the structural and spectroscopic characterization of a novel metal organic compound formulated as [Fe (bpy)₃] [Fe (dipic)₂]₂.7H₂O ( 1 ) (dipic = pyridine‐2,6‐dicarboxylate and bpy = 2,2^′‐bipyridine). 1 was investigated by elemental analysis, FT‐IR spectroscopy, powder X‐ray diffraction and single crystal X‐ray diffraction (SC‐XRD), which revealed a triclinic structure of expected composition. Thermal degradation of 1 was also investigated. Complex 1 was used as a precursor to prepare superparamagnetic nanoparticles of Fe₃O₄ by thermal analysis. The obtained Fe₃O₄ was characterized by Fourier transformed infrared spectroscopy (FT‐IR), powder X‐ray diffraction (XRD) and scanning electron microscopy (SEM). Fe₃O₄ nanoparticles were used as a nano‐adsorbent to remove Cd²⁺ from water at room temperature. The results showed that this nano‐adsorbent is effective in removing Cd²⁺ from contaminated water sources, and that the maximal effectivity of adsorption occurs at pH = 6. Magnetic measurements of complex 1 and Fe₃O₄ nanoparticles at room temperature revealed paramagnetic and superparamagnetic behavior, respectively.     

Development of Fish Immunity and the Role of β-Glucan in Immune Responses

Administration of β-glucans through various routes, including immersion, dietary inclusion, or injection, have been found to stimulate various facets of immune responses, such as resistance to infections and resistance to environmental stress. β-Glucans used as an immunomodulatory food supplement have been found beneficial in eliciting immunity in commercial aquaculture. Despite extensive research involving more than 3000 published studies, knowledge of the receptors involved in recognition of β-glucans, their downstream signaling, and overall mechanisms of action is still lacking. The aim of this review is to summarize and discuss what is currently known about of the use of β-glucans in fish.     

The statistical significance of selected sense–antisense peptide interactions

Sense and antisense peptides, encoded by sense and corresponding antisense DNA strands, are capable of specific interactions that could be a driving force to mediate protein–protein or protein–peptide binding associations. The complementary residue hypothesis suggests that these interactions are founded upon the sum of pairwise interactions between amino acids encoded by corresponding sense and antisense codons. Despite many successful experimental results obtained with the hypothesis, however, the physicochemical basis for these interactions is poorly understood. We examined the potential of the hypothesis for general identification of protein–protein interaction sites, and the possible role of the hypothesis in determining folding in a broad set of protein structures. In addition, we performed a structural study to investigate the binding of a complementary peptide to IL‐1F2. Our results suggest that complementary residue pairs are no more frequent or conserved than average in protein–protein interfaces, and are statistically under‐represented amongst contacting residue pairs in folded protein structures. Although our structural results matched experimental observations of binding between the peptide and IL‐1F2, complementary residue interactions do not appear to be dominant in the bound structure. Overall, our data do not allow us to conclude that the complementary residue hypothesis accounts for specific sense–antisense peptide interactions. © 2012 Wiley Periodicals, Inc.     

Betacyanins and Betaxanthins in Cultivated Varieties of Beta vulgaris L. Compared to Weed Beets

There are 11 different varieties of Beta vulgaris L. that are used in the food industry, including sugar beets, beetroots, Swiss chard, and fodder beets. The typical red coloration of their tissues is caused by the indole-derived glycosides known as betalains that were analyzed in hypocotyl extracts by UV/Vis spectrophotometry to determine the content of betacyanins (betanin) and of betaxanthins (vulgaxanthin I) as constituents of the total betalain content. Fields of beet crops use to be also infested by wild beets, hybrids related to B. vulgaris subsp. maritima or B. macrocarpa Guss., which significantly decrease the quality and quantity of sugar beet yield; additionally, these plants produce betalains at an early stage. All tested B. vulgaris varieties could be distinguished from weed beets according to betacyanins, betaxanthins or total betalain content. The highest values of betacyanins were found in beetroots ‘Monorubra’ (9.69 mg/100 mL) and ‘Libero’ (8.42 mg/100 mL). Other beet varieties contained less betacyanins: Sugar beet ‘Labonita’ 0.11 mg/100 mL; Swiss chard ‘Lucullus,’ 0.09 mg/100 mL; fodder beet ‘Monro’ 0.15 mg/100 mL. In contrast with weed beets and beetroots, these varieties have a ratio of betacyanins to betaxanthins under 1.0, but the betaxanthin content was higher in beetcrops than in wild beet and can be used as an alternative to non-red varieties. Stability tests of selected varieties showed that storage at 22 °C for 6 h, or at 7 °C for 24 h, did not significantly reduce the betalain content in the samples.     

Caractéristique directionnelle calculée et mesurée d'une sonde électrochimiqueCalculated and measured directional characteristic of an electrochemical probe

The present paper demonstrates how the directional characteristics of an actual three-segment electrodiffusional sensor can be calculated from the probe image. It was shown that utilization of ‘ideal’ directional characteristics lead to an important (up to 15^°) error in flow angle determination. The directional characteristics calculated from the probe image improve significantly (up to 50%) the accuracy of the flow angle measurements. To cite this article: F. Barbeu et al., C. R. Mecanique 330 (2002) 433–436.     

Meta nitration of thiacalixarenes

Nitration of thiacalix[4]arene, immobilized in the 1,3-alternate conformation, leads regioselectively to meta-substituted products. Depending on the reaction conditions, mono- and dinitro-derivatives can be isolated in acceptable yields. This unique substitution pattern is inaccessible in classical calixarene chemistry, and yields inherently chiral compounds, which makes thiacalixarenes very attractive as building blocks or molecular scaffolds.     

Regioselective ipso-nitration of calix[4]arenes

A novel protection/deprotection method leading to the regioselective ipso-substitution of calix[4]arenes is described. The introduction of nosyl (p-nitrobenzenesulfonyl) groups into the lower rim of partly alkylated tert-butylcalix[4]arenes leads subsequently to the exclusive ipso-nitration of the alkylated phenol rings, while the protecting groups can be easily removed in the next step. This method gives dialkoxy- or trialkoxy-substituted calix[4]arenes with nitro groups on the alkylated rings and tert-butyl groups on the remaining ones. The above substitution pattern is complementary to the isomers so far known in the chemistry of calix[4]arenes and could be used in the design of novel type of calixarene-based receptors.     

Luminescence Properties of New Fused Benzothiophene Derivatives and Their Conductive Oligomers Structural and Solvent Effects

The structural and solvent effects on the electronic absorption and fluorescence spectra, and fluorescence quantum yields, of four new fused benzothiophene derivatives, including benzothieno[3,2b]-thiophene (BTT), benzothieno[3,2-b]benzothiophene (BTBT), 6-methoxy[1]benzothieno[3,2b]-thiophene (MeOBTT), and benzothieno[3,2-b]indole (BTI) were investigated at 295 K. The luminescence properties of the corresponding conductive oligomers, poly(BTT) and poly (MeOBTT), electrosynthesized in acetonitrile, were also studied. Satisfactory McRae, Suppan, and Kawski-Chamma-Viallet solvatochromic correlations were established for the four monomers in most solvents. A weak negative solvatochromic behavior was found for these compounds, indicating that their dipole moments are slightly lower in the excited singlet state than in the ground state. Kamlet-Abboud-Taft multiparametric correlations were also obtained for absorption and fluorescence wave numbers and quantum yields, demonstrating the existence of specific solute-solvent interactions. In the case of the oligomers, important red-shifts of the fluorescence emission maxima ( 90–110 nm) relative to the corresponding monomers were observed, which shows the extent of conjugated segments in the oligomer chains.     

Free energy simulations of uncatalyzed DNA replication fidelity: structure and stability of T.G and dTTP.G terminal DNA mismatches flanked by a single dangling nucleotide

A reference system for DNA replication fidelity was studied by free energy perturbation (FEP) and linear interaction energy (LIE) methods. The studied system included a hydrated duplex DNA with the 5'-CG dangling end of the templating strand, and dCTP4-.Mg2+ or dTTP4-.Mg2+ inserted opposite the dangling G to form a correct (i.e., Watson-Crick) or incorrect (i.e., wobble) base pair, respectively. The average distance between the 3'-terminal oxygen of the primer strand and the alpha-phosphorus of dNTP was found to be 0.2 A shorter for the correct base pair than for the incorrect base pair. Binding of the incorrect dNTP was found to be disfavored by 0.4 kcal/mol relative to the correct dNTP. We estimated that improved binding and more near-attack configurations sampled by the correct base pair should translate in aqueous solution and in the absence of DNA polymerase into a six times faster rate for the incorporation of the correct dNTP into DNA. The accuracy of the calculated binding free energy difference was verified by examining the relative free energy for melting duplex DNA containing GC and GT terminal base pairs flanked by a 5' dangling C. The calculated LIE and FEP free energies of 1.7 and 1.1 kcal/mol, respectively, compared favorably with the experimental estimate of 1.4 kcal/mol obtained using the nearest neighbor parameters. To decompose the calculated free energies into additive electrostatic and van der Waals contributions and to provide a set of rigorous theoretical data for the parametrization of the LIE method, we suggested a variant of the FEP approach, for which we coined a binding-relevant free energy (BRFE) acronym. BRFE approach is characterized by its unique perturbation pathway and by its exclusion of the intramolecular energy of a rigid part of the ligand from the total potential energy.