Biopolymer-Polysiloxane Double Network Aerogels

A new series of transparent aerogels of biopolymer-polysiloxane double networks is reported. Biopolymer aerogels have attracted much attention from green and sustainable aspects but suffered from strong hydrophilicity and difficulty to make homogeneous structures in nanoscale; these drawbacks are overcome by compositing with a polysiloxane network. Alginate-polymethylsilsesquioxane aerogel has high optical transparency, water repellency, comparable superinsulation property and improved bending flexibility compared to pure polymethylsilsesquioxane aerogel. The nanoscale homogeneity is realized by separating the crosslinking steps for two networks in a sequential protocol: condensation of siloxane bonds and metal-crosslinking of biopolymer. The crosslinking order, biopolymer-first or siloxane-first, and universality/limitation of biopolymer-crosslinker pairs are discussed to construct fundamental chemistry of double network systems for their further application potentials.     

Intermolecular hydrogen bonding as an aid to the preferential exhibition of the smectic C phase in troponoid liquid crystals

Abstract

2-(4-Alkoxybenzoyloxy)-5-alkylaminotropone and 5-alkoxy-2-(4-alkylaminobenzoyloxy)tropone liquid crystals showed the smectic C phase exclusively. Variable temperature FT-IR spectra indicated that intermolecular hydrogen bonding between the NH and tropone C=O groups assisted the appearance of the mesophase. 4-Alkoxyphenyl 4-alkylaminobenzoates were non-mesogenic.     

Monocyclic rod-type liquid crystals; 2,5-dialkanoyloxytropones and 5-alkanoyloxy-2-alkoxytropones

Two kinds of monocyclic troponoid mesogens, 2,5-dialkanoyloxytropones (4) and 5-alkanoyloxy2-alkoxytropones (5), were prepared. The former showed monotropic smectic A phases and the virtual isotropic liquid-smectic A transitions of the latter were determined by extrapolation of results in a binary phase diagram. Comparing the mesogenic properties between the tropones 4 and the 2-alkanoyloxy-5-alkoxytropones (1), the alkanoyloxy group at C-5 enhances both the melting points and the transition temperatures of the smectic A phases. From the comparison between 5 and 1, the alkanoyloxy group at C-2 lowers the melting points.     

Surface treatment of CaCO3 with a mixture of amino- and mercapto-functional silane coupling agents and tensile properties of the rubber composites

In order to reinforce the composite consisting of isoprene rubber (IR) and calcium carbonate (CaCO₃) particles, the surface treatment of CaCO₃ particles with a mixture of amino- and mercapto-functional silane coupling agents was investigated. The quantity of chemisorbed silanes in treated CaCO₃ measured using thermogravimetry was greater for amino- than for mercapto-silane and for the tri- than for the dialkoxy structure. Second, the molecular mobility of polycondensate of the mixtures with the trialkoxy structure measured using ¹H pulse nuclear magnetic resonance had the least molecular mobility, i.e., formed the highest density network. The greater values of stress at 500% strain, fracture stress, and elongation at break were determined for the treatment with amino- and mercapto-functional silanes having a trialkoxy structure from the stress-strain curves of composite. The mixture treatment with dialkoxy structure and with amino- or mercapto-functional silane only did not improve the mechanical properties sufficiently. Interactions between the amino group and the CaCO₃ surface, covalent bonding between the mercapto group and the IR, and high density network formation of trialkoxy silane were important for improving the mechanical properties of the composite.     

Anionic polymerization of N,N‐dialkyl‐2‐methylenebut‐3‐enamide: Effect of alkyl substituents on polymerization behavior

Anionic polymerizations of three 1,3‐butadiene derivatives containing different N,N‐dialkyl amide functions, N,N‐diisopropylamide (DiPA), piperidineamide (PiA), and cis‐2,6‐dimethylpiperidineamide (DMPA) were performed under various conditions, and their polymerization behavior was compared with that of N,N‐diethylamide analogue (DEA), which was previously reported. When polymerization of DiPA was performed at ?78 °C with potassium counter ion, only trace amounts of oligomers were formed, whereas polymers with a narrow molecular weight distribution were obtained in moderate yield when DiPA was polymerized at 0 °C in the presence of LiCl. Decrease in molecular weight and broadening of molecular weight distribution were observed when polymerization was performed at a higher temperature of 20 °C, presumably because of the effect of ceiling temperature. In the case of DMPA, no polymer was formed at 0 °C and polymers with relatively broad molecular weight distributions (M_w/M_n = 1.2) were obtained at 20 °C. The polymerization rate of PiA was much faster than that of the other monomers, and poly(PiA) was obtained in high yield even at ?78 °C in 24 h. The microstructure of the resulting polymers were exclusively 1,4‐ for poly(DMPA), whereas 20–30% of the 1,2‐structure was contained in poly(DiPA) and poly(PiA). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3714–3721, 2010     

Upgrade of the nuclear resonant scattering beamline, BL09XU in SPring-8

An Upgrade of the nuclear resonant scattering beamline, BL09XU in SPring-8 has been conducted. A liquid nitrogen cooled high-heat load monochromator was installed and a 2nd experimental hutch was constructed. The instruments installed in the hutch allow for a variety of sample conditions. Newly developed high-resolution monochromators with better stability including the back scattering geometry monochromator have opened up the easy access to more isotopes and more precise measurements.     

Structural analysis of certain linear operators representing chemical network systems via the existence and uniqueness theorems of spectral resolution. VI*

The present Part VI of this series of articles provides a mathematical and methodical link between (i) fundamental methodology in the repeat space theory (RST), which is referred to as the approach via the aspect of form and general topology and which has universal unifying power to handle additivity problems of molecules that have many identical moieties, and (ii) frontier electron theory of reactivity indices. Using theoretical tools required to link (i) and (ii), we establish a theorem from which the Generalized Alpha Existence Theorem (a theorem essential in the RST and proved in the previous Part V) directly follows. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem 84: 389–400, 2001