Adsorption Characteristics of Pb(II) and Cr(III) onto C‐4‐Methoxyphenylcalix[4]Resorcinarene in Batch and Fixed Bed Column Systems

A study on the adsorption characteristics of Pb(II) and Cr(III) cations onto C‐4‐methoxyphenylcalix‐[4]resorcinarene (CMPCR) in batch and fixed bed column systems has been conducted. CMPCR was produced by one step synthesis from resorcinol, 4‐methoxybenzaldehyde, and HCl. The synthesis was carried out at 78 °C for 24 hours and afforded the adsorbent in 85.7% as a 3:2 mixture of C_4ν:C_2ν isomer. Most parameters in batch and fixed bed column systems confirm that CMPCR is a good adsorbent for Pb(II) and Cr(III), though Pb(II) adsorption was more favorable than that of Cr(III). The adsorption kinetic of Pb(II) and Cr(III) adsorptions in batch and fixed bed column systems followed a pseudo 2ⁿ order kinetics model. The rate constant of Pb(II) was higher than that of Cr(III) in the batch system, but this result was contrary to the result obtained in a fixed bed column system. Desorption studies to recover the adsorbed Pb(II) and Cr(III) were performed sequentially with distilled water and HCl, and the results showed that the adsorption was dominated by chemisorption.     

Piper betle (L): Recent Review of Antibacterial and Antifungal Properties,Safety Profiles,and Commercial Applications

Piper betle (L) is a popular medicinal plant in Asia. Plant leaves have been used as a traditional medicine to treat various health conditions. It is highly abundant and inexpensive, therefore promoting further research and industrialization development, including in the food and pharmaceutical industries. Articles published from 2010 to 2020 were reviewed in detail to show recent updates on the antibacterial and antifungal properties of betel leaves. This current review showed that betel leaves extract, essential oil, preparations, and isolates could inhibit microbial growth and kill various Gram-negative and Gram-positive bacteria as well as fungal species, including those that are multidrug-resistant and cause serious infectious diseases. P. betle leaves displayed high efficiency on Gram-negative bacteria such as Escherichia coli and Pseudomonas aeruginosa, Gram-positive bacteria such as Staphylococcus aureus, and Candida albicans. The ratio of MBC/MIC indicated bactericidal and bacteriostatic effects of P. betle leaves, while MFC/MIC values showed fungicidal and fungistatic effects. This review also provides a list of phytochemical compounds in betel leaves extracts and essential oils, safety profiles, and value-added products of betel leaves. Some studies also showed that the combination of betel leaves extract and essential oil with antibiotics (streptomycin, chloramphenicol and gentamicin) could provide potentiating antibacterial properties. Moreover, this review delivers a scientific resume for researchers in respected areas and manufacturers who want to develop betel leaves-based products.     

A Review on Optimization Production and Upgrading Biogas Through CO2 Removal Using Various Techniques

Biogas from anaerobic digestion of organic materials is a renewable energy resource that consists mainly of CH₄ and CO₂. Trace components that are often present in biogas are water vapor, hydrogen sulfide, siloxanes, hydrocarbons, ammonia, oxygen, carbon monoxide, and nitrogen. Considering the biogas is a clean and renewable form of energy that could well substitute the conventional source of energy (fossil fuels), the optimization of this type of energy becomes substantial. Various optimization techniques in biogas production process had been developed, including pretreatment, biotechnological approaches, co-digestion as well as the use of serial digester. For some application, the certain purity degree of biogas is needed. The presence of CO₂ and other trace components in biogas could affect engine performance adversely. Reducing CO₂ content will significantly upgrade the quality of biogas and enhancing the calorific value. Upgrading is generally performed in order to meet the standards for use as vehicle fuel or for injection in the natural gas grid. Different methods for biogas upgrading are used. They differ in functioning, the necessary quality conditions of the incoming gas, and the efficiency. Biogas can be purified from CO₂ using pressure swing adsorption, membrane separation, physical or chemical CO₂ absorption. This paper reviews the various techniques, which could be used to optimize the biogas production as well as to upgrade the biogas quality.     

Effective synthesis of some indole nitriles from the related carbaldoximes

Four 7-cyano-indoles and one 2-cyano-indole have been synthesized from the related aldoximes, via the intermediate 2,4-dinitrophenyl oxime ethers.     

Chitin-humic acid hybrid as adsorbent for Cr(III) in effluent of tannery wastewater treatment

Adsorption of Cr(III) from both synthetic and real samples of tannery wastewater treatment's effluent on chitin-humic acid (chitin-HA) hybrid has been carried out. Rate constant and capacity of adsorption of Cr(III) from the synthetic sample were investigated and removal of Cr(III) from the real sample was tested at optimum medium acidity equivalent to pH 3.5. Characterization using Fourier transform infra red (FT-IR) spectroscopy revealed that both COO⁻ and N-acetyl originated from respectively humic acid (HA) and chitin were involved on the adsorption of Cr(III), and hence the Freundlich's multilayer and multi-energy adsorption model was more applicable to treat the adsorption data than the Langmuir's monolayer and mono-energy model. The quantification of adsorption capacity and rate constant using Freundlich isotherm model and first order adsorption reaching equilibrium yielded values of 6.84 × 10⁻⁴ mol g⁻¹ (35.57 mg g⁻¹) and 1.70 × 10⁻² min⁻¹, respectively. Removal test for the real wastewater treatment's effluent showed that the maximum amount of Cr(III) could be removed by 1 g of chitin-HA hybrid was 2.08 × 10⁻⁴ mol or equivalent to 10.82 mg.     

Optimization of methane conversion to liquid fuels over W-Cu/ZSM-5 catalysts by response surface methodology

The conversion of methane to liquid fuels is still in the development process. The modified HZSM-5 by loading with Tungsten （W） enhanced its heat resistant performance, and the high reaction temperature （800℃） did not lead to the loss of W component by sublimation. The loading of ZSM-5 with Tungsten and Copper （Cu） resulted in an increment in the methane conversion, CO2, and C5＋ selectivities. The high methane conversion and C5＋ selectivity, and low H2O selectivity are obtained by using W/3.0Cu/ZSM-5. The optimization of methane conversion over 3.0 W/3.0Cu/ZSM-5 under different temperature and oxygen concentration using response surface methodology （RSM） are studied. The optimum point for methane conversion is 19% when temperature is 753 ℃, and oxygen concentration is 12%. The highest C5＋ selectivity is 27% when temperature is 751 ℃. and oxwen concentration is 11%.     

Flexible microfluidic cloth-based analytical devices using a low-cost wax patterning technique

This paper describes the fabrication of microfluidic cloth-based analytical devices (μCADs) using a simple wax patterning method on cotton cloth for performing colorimetric bioassays. Commercial cotton cloth fabric is proposed as a new inexpensive, lightweight, and flexible platform for fabricating two- (2D) and three-dimensional (3D) microfluidic systems. We demonstrated that the wicking property of the cotton microfluidic channel can be improved by scouring in soda ash (Na(2)CO(3)) solution which will remove the natural surface wax and expose the underlying texture of the cellulose fiber. After this treatment, we fabricated narrow hydrophilic channels with hydrophobic barriers made from patterned wax to define the 2D microfluidic devices. The designed pattern is carved on wax-impregnated paper, and subsequently transferred to attached cotton cloth by heat treatment. To further obtain 3D microfluidic devices having multiple layers of pattern, a single layer of wax patterned cloth can be folded along a predefined folding line and subsequently pressed using mechanical force. All the fabrication steps are simple and low cost since no special equipment is required. Diagnostic application of cloth-based devices is shown by the development of simple devices that wick and distribute microvolumes of simulated body fluids along the hydrophilic channels into reaction zones to react with analytical reagents. Colorimetric detection of bovine serum albumin (BSA) in artificial urine is carried out by direct visual observation of bromophenol blue (BPB) colour change in the reaction zones. Finally, we show the flexibility of the novel microfluidic platform by conducting a similar reaction in a bent pinned μCAD.     

Stop location design in public transportation networks: covering and accessibility objectives

We consider the location of new stops along the edges of an existing public transportation network. Examples of StopLoc include the location of bus stops along some given bus routes or of railway stations along the tracks in a railway system. In order to evaluate the decision assume that potential customers in given demand facilities are known. Two objectives are proposed. In the first one, we minimize the number of stations such that any of the demand facilities can reach a closest station within a given distance of r. In the second objective, we fix the number of new stations and minimize the sum of the distances between demand facilities and stations. The resulting two problems CovStopLoc and AccessStopLoc are solved by a reduction to a classical set covering and a restricted location problem, respectively. We implement the general ideas in two different environments, the plane, where demand facilities are represented by coordinates, and in networks, where they are nodes of a graph.     

Dealuminated ZSM—5 Zeolite Catalyst for Ethylene Oligomerization to Liquid Fuels

Ethylene oligomerization using ZSM-5 zeolite was investigated to study the role of Broensted acid sites in the formation of higher hydrocarbons,The oligomeriztion of olefins,dependent on the acidity of ZSM-5 zeolite ,is an important step in the conversion of natural gas to liquied fuels,The framework Si/Al ratio reflects the number of potential acid sites and the acid strength of the ZSM-5 catalyst,ZSM-5 with the mole ratio SiO2/Al2O3 equal to 30 was dealuminated for different periods of time according to the acidic ion-exchange method to produce ZSM-5 with various Si/Al ratios,The FT-IR analysis revealed that the integrated framework aluminum band,non-framework aluminum band,and silanol groups areas of the ZSM-5 zeolites decreased after being dealuminated,The performanc of the dealuminated zeolite was tested for ethylene oligomerization.The results demonstrated that the dealumination of ZSM-5 led to higher ethylene conversion,but the gasoline selectivity was reduced compared to the performance of a ZSM-5 zeolite ,The characterization results revealed the amount of aluminum in the zeolitic framework,the crystallinity of the ZSM-5 zeolite,and the Si/Al ration affected the formation of Broensted acid sites,The number of the Broensted acid sites on the catalyst active sites is important in the olefin conversion to liquied hydrocarbons.