A simple,rapid and sensitive method based on modified multiwalled carbon nanotube for preconcentration and determination of lead ions in aqueous media in natural pHs

In this study, multiwalled carbon nanotube (MWCNT) was modified by the pyridine group using a silane agent and characterized by infrared spectroscopy (IR), thermal analysis (TG/DTA), and elemental analysis (CHN) and scanning electron microscopy (SEM). The application of this sorbent was investigated in determination of lead ions in aqueous samples, using flame atomic absorption spectrometry (FAAS). Through this study, different parameters such as pH and sample flow rate on adsorption process and eluent concentration, volume and flow rate were optimized. The limit of detection (LOD), the relative standard deviation and the recovery of the method were 2 ng mL^?1, 1.3% and 99.7%, respectively. Two standard reference materials (NIST 1571 and NIST 1572) were used to verify accuracy of this method. Finally, the sorbent was successfully applied for extraction and determination of low levels of Pb(II) ions in aqueous samples.     

Preparation of an efficient catalyst through injection of CuI on modified poly (styrene-co-maleic anhydride) and theoretical investigation of the structural and electronic properties of catalyst

A novel polymer supported [poly (styrene-co-maleic imide) (SMI)]Cu(I) nano-particles was prepared via in situ reaction of 4-amino-5-methyl-4H-1,2,4-triazole-3-thione with [poly (styrene-co-maleic anhydride)] (SMA) along with immobilization of CuI. These nano-particles were fully characterized by using scanning electron microscopy (SEM), energy dispersive spectroscopy analysis, Xray (EDAX), inductively coupled plasma (ICP) analysis, ¹H NMR and FT-IR techniques. Moreover, the structural and electronic features of metal–ligand interactions in the complex model of polymer-supported copper nanocatalyst were assessed using density functional theory calculations. The catalytic activity of these supported Cu(I) nonoparticles was examined in one of the classiest name reaction so–called “click reaction” which is coined K. B Sharpless for the regioselective synthesis of 1,2,3-triazole derivatives using a multicomponent reaction (MCR) involving benzyl halides, sodium azide and terminal alkynes in water as a green solvent. This heterogeneous catalyst showed excellent catalytic activity and was separated by simple filtration and was used at least in five consecutive runs without a significant decrease in its activity.     

The oak (Quercus brantii) acorn as a growth promotor for rainbow trout (Oncorhynchus mykiss): growth performance,body composition,liver enzymes activity and blood biochemical parameters

Abstract

Medicinal plants play an important role in aquaculture as feed additives. This study aimed to investigate effects of alcoholic extract of acorn on growth performance, body composition, digestive enzymes activity and blood biochemical parameters of rainbow trout (O. mykiss) as a commercially important fish. Five dietary treatments were supplemented: 100, 200, 400 and 600?mg.kg^?1 of the extract. Fishes were fed twice per day for 8?weeks, and results showed that acorn extract positively affected all investigated parameters in rainbow trout fishes. Digestive enzymes activity and growth performance were increased, while activity of liver enzymes and cortisol were lowed in comparison to control individuals. Body composition of treated animals was also enhanced. Comparison between treated groups together with integrative biomarker response (IBR) values indicated greatest effects in animals fed with 400 and 600?mg.kg^?1 of the extract. Positive effects of the acorn represent promising start point for further studies.     

A microextraction procedure based on a task‐specific ionic liquid for the separation and preconcentration of lead ions from red lipstick and pine leaves

First, the extraction and preconcentration of ultratrace amounts of lead(II) ions was performed using microliter volumes of a task‐specific ionic liquid. The remarkable properties of ionic liquids were added to the advantages of microextraction procedure. The ionic liquid used was trioctylmethylammonium thiosalicylate, which formed a lead thiolate complex due to the chelating effect of the ortho‐positioned carboxylate relative to thiol functionality. So, trioctylmethylammonium thiosalicylate played the roles of both chelating agent and extraction solvent simultaneously. Hence, there is no need to use a ligand. The main parameters affecting the efficiency of the method were investigated and optimized. Under optimized conditions, this approach showed a linear range of 2.0–24.0 ng/mL with a detection limit of 0.0010 ng/mL. The proposed method was applied to the extraction and preconcentration of lead from red lipstick and pine leaves samples prior to electrothermal atomic absorption spectroscopic determination.     

Coating Cellulosic Material with Ag Nanowires to Fabricate Wearable IR-Reflective Device for Personal Thermal Management: The Role of Coating Method and Loading Level

Textiles coated with silver nanowires (AgNWs) are effective at suppressing radiative heat loss without sacrificing breathability. Many reports present the applicability of AgNWs as IR-reflective wearable textiles, where such studies partially evaluate the parameters for practical usage for large-scale production. In this study, the effect of the two industrial coating methods and the loading value of AgNWs on the performance of AgNWs-coated fabric (AgNWs-CF) is reported. The AgNWs were synthesized by the polyol process and applied onto the surface of cotton fabric using either dip- or spray-coating methods with variable loading levels of AgNWs. X-ray diffraction, scanning electron microscopy (SEM), infrared (IR) reflectance, water vapor permeability (WVP), and electrical resistance properties were characterized. The results report the successful synthesis of AgNWs with a 30 μm length. The results also show that the spray coating method has a better performance for reflecting the IR radiation to the body, which increases with a greater loading level of the AgNWs. The antibacterial results show a good inhibition zone for cotton fabric coated by both methods, where the spray-coated fabric has a better performance overall. The results also show the coated fabric with AgNWs maintains the level of fabric breathability similar to control samples. AgNWs-CFs have potential utility for cold weather protective clothing in which heat dissipation is attenuated, along with applications such as wound dressing materials that provide antibacterial protection.     

Computational Study on the Structural and Electronic Properties of Multi-Nuclear Palladium and Nickel Silyl Complexes via DFT and QTAIM Approaches

In this research, we have concentrated on the survey of ability of density functional methods and also modern semi-empirical approaches to reproduce the crystal structure of a binuclear silyl nickel complex and a trinuclear palladium silyl complex. In the structural analysis of the aforesaid nickel and palladium complexes, we have also interested to investigate the possibility of Si-Si bond formation between SiH₂ and μ-SiH moieties from the structural and electronic viewpoints. Comparison of our calculated structural parameters of aforementioned complexes with the available X-ray crystallographical data reveals that both functionals (B3LYP and M062X) can well reproduce X-ray structure of the complex with a near accuracy while the PM6-D2 semi-empirical calculated values are not in a reliable agreement with the crystallographical data. In the next step, we assessed the nature of interactions between palladium and nickel metal ions with silyl ligands via Quantum Theory of Atoms in Molecule (QTAIM) computations. Furthermore, we have analyzed the possibility of Si-Si bond formation in the aforementioned complexes by means of topological electronic indices. Strictly speaking, QTAIM calculations have been performed to explore the electronic density, its laplacian and electronic energy density at some key bond critical points to interpret the structural features of aforesaid complexes from the electronic point of view.     

Solvent selection in ultrasonic-assisted emulsification microextraction: Comparison between high- and low-density solvents by means of novel type of extraction vessel

There are numerous published reports about dispersive liquid phase microextraction of the wide range of substances, however, till now no broadly accepted systematic and purpose oriented selection of extraction solvent has been proposed. Most works deal with the optimization of available solvents without adequate pre-consideration of properness. In this study, it is tried to compare the performances of low- and high-density solvents at the same conditions by means of novel type of extraction vessel with head and bottom conical shape. Extraction efficiencies of seven basic pharmaceutical compounds using eighteen common organic solvents were studied in this work. It was much easier to work with high-density solvents and they mostly showed better performances. This work shows that although exact predicting the performance of the solvents is multifaceted case but the pre-consideration of initial selection of solvents with attention to the physiochemical properties of the desired analytes is feasible and promising. Finally, the practicality of the method for extraction from urine and plasma samples was investigated.     

Isocyanide-based four-component synthesis of ferrocenyl 1,5-disubstituted tetrazoles

A convenient four-component synthesis of ferrocenyl tetrazoles by the reaction of ferrocenecarboxaldehyde, isocyanides, azidotrimethylsilane and alkyl or aryl amines in CH₂Cl₂ at room temperature is reported.