Precise determination of bromine in PP resin pellet by instrumental neutron activation analysis using internal standardization

Instrumental neutron activation analysis with the internal standardization was applied to the precise determination of Br in polypropylene resin of candidate certified reference material. The known amount of ¹⁹⁷Au was used as an internal standard to compensate for neutron flux inhomogeneity, to improve the γ ray measurement uncertainty and the linearity of the calibration curves. The reliability of the proposed method validated using analytical results of BCR-681. The analytical result of Br in the sample was consistent with that obtained by ID-ICPMS. The relative expanded uncertainty (k = 2) was 1.5 %, and it was equivalent to that of ID-ICPMS.     

Estimation of 47Sc and 177Lu production rates from their natural targets in Kyoto University Research Reactor

Journal of Radioanalytical and Nuclear Chemistry - To assess the capability of Kyoto University Research Reactor to supply the domestic needs of medical isotopes, its neutron flux has been fully...     

Less than 10 defects/cm·μm in molecular beam epitaxy grown GaAs by arsenic cracking

Drastic reduction of irregular defect density in molecular beam epitaxy (MBE) grown GaAs is obtained by using a novel arsenic Knudsen effusion cell with a cracking furnace. A surface defect density of less than 10 cm⁻² is routinely achieved for continuously grown three 3-inch diameter, 1.7 μm thick, metal-semiconductor-field effect transistor (MESFET) structures when the cracking is carried out at about 700°C, which is the critical temperature for the conduction type change, and with the group III Knudsen cell only heated near the orifice of the crucible (top heat cell). These optimized cracking conditions also lead to successful mass production of some microwave devices with not only ultra-low defect density but suitable electrical performances.     

Adsorption of fission products onto soils using a fission multitracer

The adsorption behavior of fission products to various soils was studied using a multitracer. The multitracer was prepared by neutron irradiation of ²³⁵U. Distribution coefficients of fission products were obtained for seventeen kinds of Japanese soils. It was found that zirconium, niobium, and rare earth elements show high distribution coefficients for all soil samples, however, elements like alkali metals show varied values.     

Hydroquinone oxidation catalyzed by pyridine–Cu(II) complexes attached to polyorganosiloxane. II. Elucidation of factors related to catalytic activity

The oxidation of hydroquinone catalyzed by pyridine-Cu(II) complexes attached to polyorganosiloxane was investigated in the mixed solvent of methanol/water (vol. ratio 2/1). The catalytic oxidation followed Michaelis-Menten-like kinetics. The large k₂ term related to a turnover number indicated that the present polymeric catalysts have a remarkable effect on the activation process. The methylene number between the side-chain acid amido and pyridyl groups of the polymeric ligand was shown to be closely related to the appearance of hydrophobic effects in both the substrate-binding and the activation processes as deduced from the Michaelis constant and the thermodynamic and activation parameters. The binding parameters for 4-methoxyphenol with pyridyl-functionalized polyorganosiloxanes supported that the flexible backbone is also effective in the oxidation of hydroquinone. The Cu(II) complexes with pyridyl-functionalized polyorganosiloxane would have the structures distorted from square planar formation, which would promote the reduction of Cu(II) to Cu(I), as concluded from ESR spectroscopy and electrochemical measurement. © 1994 John Wiley & Sons, Inc.     

Coalitional unanimity versus strategy-proofness in coalition formation problems

This paper examines coalition formation problems from the viewpoint of mechanism design. We consider the case where (i) the list of feasible coalitions (those coalitions which are permitted to form) is given in advance; and (ii) each individual’s preference is a ranking over those feasible coalitions which include this individual. We are interested in requiring the mechanism to guarantee each coalition the “right” of forming that coalition at least when every member of the coalition ranks the coalition at the top. We name this property coalitional unanimity. We examine the compatibility between coalitional unanimity and incentive requirements, and prove that if the mechanism is strategy-proof and respects coalitional unanimity, then for each preference profile, there exists at most one strictly core stable partition, and the mechanism chooses such a partition whenever available. Further, the mechanism is coalition strategy-proof and respects coalitional unanimity if, and only if, the strictly core stable partition uniquely exists for every preference profile.     

Surface modification with well-defined biocompatible triblock copolymers Improvement of biointerfacial phenomena on a poly(dimethylsiloxane) surface

To improve interfacial phenomena of poly(dimethylsiloxane) (PDMS) as biomaterials, well-defined triblock copolymers were prepared as coating materials by reversible addition-fragmentation chain transfer (RAFT) controlled polymerization. Hydroxy-terminated poly(vinylmethylsiloxane-co-dimethylsiloxane) (HO–PV_lD_mMS–OH) was synthesized by ring-opening polymerization. The copolymerization ratio of vinylmethylsiloxane to dimethylsiloxane was 1/9. The molecular weight of HO–PV_lD_mMS–OH ranged from (1.43 to 4.44) × 10⁴, and their molecular weight distribution (M_w/M_n) as determined by size-exclusion chromatography equipped with multiangle laser light scattering (SEC-MALS) was 1.16. 4-Cyanopentanoic acid dithiobenzoate was reacted with HO–PV_lD_mMS–OH to obtain macromolecular chain transfer agents (macro-CTA). 2-Methacryloyloxyethyl phosphorylcholine (MPC) was polymerized with macro-CTAs. The gel-permeation chromatography (GPC) chart of synthesized polymers was a single peak and M_w/M_n was relatively narrow (1.3–1.6). Then the poly(MPC) (PMPC)–PV_lD_mMS–PMPC triblock copolymers were synthesized. The molecular weight of PMPC in a triblock copolymer was easily controllable by changing the polymerization time or the composition of the macro-CTA to a monomer in the feed. The synthesized block copolymers were slightly soluble in water and extremely soluble in ethanol and 2-propanol.

Surface modification was performed via hydrosilylation. The block copolymer was coated on the PDMS film whose surface was pretreated with poly(hydromethylsiloxane). The surface wettability and lubrication of the PDMS film were effectively improved by immobilization with the block copolymers. In addition, the number of adherent platelets from human platelet-rich plasma (PRP) was dramatically reduced by surface modification. Particularly, the triblock copolymer having a high composition ratio of MPC units to silicone units was effective in improving the surface properties of PDMS.

By selective decomposition of the Si–H bond at the surface of the PDMS substrate by irradiation with UV light, the coating region of the triblock copolymer was easily controlled, resulting in the fabrication of micropatterns. On the surface, albumin adsorption was well manipulated.     

Adsorption of fission products on a metal surface in nitric acid solutions: Radiochemical study using a multitracer

Adsorption behavior of fission products in nitric acid solution on various alloys and metals was studied by using a multitracer produced by neutron irradiation of UO₂. The adsorption behavior of the fission products ⁹⁹Mo, ¹³¹I, ¹³²Te, ¹⁴⁰La, and ¹⁴³Ce, and ²³⁹Np was simultaneously studied. Some chemical decontamination tests were also examined. Clear adsorption of ⁹⁹Mo, ¹³¹I, and ¹³²Te was observed, whereas adsorption of ¹⁴⁰La, ¹⁴³Ce, and ²³⁹Np was not. The adsorption characteristics were discussed by considering anion-exchange reaction and surface complexation.     

Inhibitory effects of tetragalloylglucose on the complex II of mitochondrial respiratory chain of Ascaris muscle

The effects of tetragalloylglucose (1,2,3,6-tetra-O-galloyl-beta-D-glucose) on purified complex II (succinate-ubiquinone oxidoreductase) of the mitochondrial electron transport system of Ascaris muscle were studied. Both succinate-ubiquinone-1 (Q1) oxidoreductase, and succinate dehydrogenase measured with 3-(4,5-dimethylthiazol-2-yl)- 2,5-diphenyltetrazolium bromide (MTT) in the presence of phenazine methosulfate (PMS) were inhibited by tetragalloylglucose. The inhibitions of both reductase activities of complex II were of competitive type, and the inhibitor constant (Ki) for Ascaris complex II (148 nM) was lower than that for rat liver complex II (1.5 microM). Thus, Ascaris complex II is much more sensitive to this inhibitor than the mammalian counterpart.