Catalytic conversion of lactic acid into propylene glycol over various metals supported on silica

Catalytic hydrogenation of lactic acid to propylene glycol was performed over various metals (Ag, Co, Cu, Ni, Pt, and Ru) supported on silica prepared by an incipient wetness impregnation method. The loading amount of each metal was 5 wt%. Crystallinity of the synthesized catalysts was investigated by X-ray diffraction (XRD), and the BET method was utilized to examine the surface area. Pore volume and pore size of catalysts were determined using BJH analysis of the N₂ adsorption isotherm. Particle sizes of various metals were determined from transmission electron microscopy (TEM) images. The catalytic activity was found to be strongly dependent on the supported metal. Among catalysts tested, Ru/SiO₂ showed the highest propylene glycol yield. The yield of propylene glycol increased with pressure, and the highest yield was achieved at 130 °C.     

Quantitative LC–MS/MS method in urine for the detection of drugs used to reverse the effects of chemical castration

The chemical castration law, which targets child molesters with recidivism, was introduced in Korea in 2011. For this, leuprolide, a gonadotropin-releasing hormone agonist, is used to decrease testosterone production and suppress libido. In order to achieve efficient law enforcement, it is necessary to monitor intentional ingestion of drugs that antagonize the effect of leuprolide. Therefore, an analytical method for the simultaneous detection of mirodenafil, sildenafil, tadalafil, udenafil, vardenafil, icariin, alprostadil, and yohimbine, which are the major impotence treatment drugs, legitimately or otherwise, in Korea, as well as their selected metabolites, in human urine was established and validated using liquid chromatography–tandem mass spectrometry (LC–MS/MS). First, different sample preparation methods, two solid-phase extractions with different cartridges and protein precipitation, were compared and protein precipitation was chosen for the entire study because it showed better matrix effects and recoveries. Thus, the drugs and metabolites in urine were extracted by protein precipitation and then filtered and analyzed by LC–MS/MS with polarity switching electrospray ionization. The validation results of selectivity, matrix effect, recovery, linearity, intra- and inter-assay precision and accuracy were satisfactory. The limits of detection ranged from 0.25 to 10 ng/mL, and the limits of quantification were 2.5 to 50 ng/mL. The drugs and metabolites in urine did not show any degradation under storage for 7 and 15 days at 4 and ?20 °C as well as after three freeze–thaw cycles. The developed method will be very useful for monitoring the illegal use of impotence treatment drugs.     

Automated electrochemical synthesis and photoelectrochemical characterization of Zn1-xCo(x)O thin films for solar hydrogen production

High-throughput electrochemical methods have been developed for the investigation of Zn1-xCo(x)O films for photoelectrochemical hydrogen production from water. A library of 120 samples containing 27 different compositions (0 相似文献   

Dihydroxylation of 2-vinylaziridine: efficient synthesis of D-ribo-phytosphingosine

An efficient and highly stereoselective synthesis of D-ribo-(2S,3S,4R)-phytosphingosine was accomplished in 62% overall yield starting from commercially available (2S)-hydroxymethylaziridine via osmium-catalyzed asymmetric dihydroxylation as a key step.     

Preparation of MoO3/Pt electrodes by electrodeposition for a direct methanol fuel cell

MoO₃/Pt binary catalysts with various Mo/Pt ratios were prepared by an electrodeposition method for use as the anode in a direct methanol fuel cell. Pt was electrodeposited onto indium tin oxide (ITO) substrate, and then MoO₃ was electrodeposited from an Mo-peroxo electrolyte on the top of Pt with different deposition times. The crystallinity of synthesized films was analyzed by X-ray diffraction (XRD), and the oxidation state of both the platinum and molybdenum were determined by X-ray photoelectron spectroscopy (XPS) analyses. Scanning electron microscopy–energy dispersive X-ray spectroscopy (SEM/EDS) was employed to investigate the surface morphology and composition. The catalytic activity and stability for methanol oxidation were measured using cyclic voltammetry and chronoamperometry in a mixture of 0.5 M H₂SO₄ and 0.5 M CH₃OH aqueous solution. Electrocatalytic activity for CO oxidation was also evaluated in a 0.5-M H₂SO₄ solution. The addition of a proper amount of MoO₃ was found to significantly improve both the catalytic activity and stability for methanol oxidation.     

Electrodeposition of mesoporous ruthenium oxide using an aqueous mixture of CTAB and SDS as a templating agent

Mesoporous RuO₂ films were electrochemically fabricated on ITO-coated glass substrate from aqueous ruthenium chloride (RuCl₃·nH₂O) solution. To achieve highly stable mesoporous structure, an aqueous mixture of cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulfate (SDS) was used as a templating agent.The mesoporous structure was confirmed by small angle X-ray diffraction (SAXRD) and transmission electron microscopy (TEM). The addition of small amount (10wt%) of CTAB significantly improved the stability of porous structure. The crystallinity of synthesized RuO₂ thin film was confirmed by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Specific capacitance of the synthesized films was evaluated by measuring cyclic voltammetry (CV) and charge-discharge curves in 0.5 M H₂SO₄. Compared with non-porous electrode, mesoporous RuO₂ showed higher supercapacitor performance.     

Factors Affecting the Branching Ratio of Photodissociation: Thiophenol Studied through Quantum Wavepacket Dynamics

The photodissociation dynamics of thiophenol (PhSH) excited to the 1¹ππ* state was investigated by time‐dependent quantum wavepacket propagation within two‐dimensional (2D) space consisting of the S?H bond and ?SH torsion. We systematically studied the dependence of the branching ratio ${\left( {{{{\rm{\tilde A}}} \mathord{\left/ {\vphantom {{{\rm{\tilde A}}} {{\rm{\tilde X}}}}} \right. \kern-\nulldelimiterspace} {{\rm{\tilde X}}}}} \right)}$ between the two electronic states of the phenylthiyl radical (PhS^.) on several factors of the 2D potential energy surfaces (PESs). The effect of a reduced initial barrier to the first ππ*/πσ* conical intersection (CI) was found to be marginal, whereas the effects of a reduced torsional barrier of ?SH on the excited ππ* state and the mitigated slope of the πσ* PES between the first (ππ*/πσ*) and the second (πσ*/S₀) CIs were noticeable. The effect of the slope on the branching ratio has never been previously noticed. It was shown that the branching ratio can be sufficiently above unity without pre‐excitation of the torsion mode of ?SH, which has been assumed so far.     

Combinatorial electrochemical synthesis and characterization of tungsten-based mixed-metal oxides

Automated systems for electrochemical synthesis and high-throughput screening of photoelectrochemical materials were developed and used to prepare tungsten-based mixed-metal oxides, W(n)O(m)M(x) [M = Ni, Co, Cu, Zn, Pt, Ru, Rh, Pd, and Ag], specifically for hydrogen production by photoelectrolysis of water. Two-dimensional arrays (libraries) of diverse metal oxides were synthesized by automated cathodic electrodeposition of the oxides on Ti foil substrates. Electrolytes for the mixed oxides were prepared from various metal salts added to a solution containing tungsten stabilized as a peroxo complex. Electrodeposition of the peroxo-stabilized cations gave rise to three distinguishable oxide groups: (1) mixed-metal oxides [Ni], (2) metal-doped tungsten oxides [Pt, Ru, Rh, Pd, Ag], and (3) metal-metal oxide composites [Co, Cu, Zn]. The oxides typically showed n-type semiconducting behavior. Automated measurement of photocurrent using a scanning photoelectrochemical cell showed the W-Ni mixed oxide had the largest relative zero bias photocurrent, particularly at a low Ni concentration (5-10 atomic percent Ni). Pt and Ru were also found to increase the photoactivity of bulk tungsten oxide at relatively low concentrations; however, at concentrations above 5 atomic percent, crystallization of WO(3) was inhibited and photoactivity was diminished. Addition of Co, Cu, and Zn to WO(3) was not found to improve the photoelectrochemical activity.     

An efficient synthesis of chiral terminal 1,2-diamines using an enantiomerically pure [1-(1′R)-methylbenzyl]aziridine-2-yl]methanol

Enantiomerically pure terminal 1,2-diamines, which can serve as precursors for the synthesis of many biologically important compounds, were synthesized efficiently from a commercially available chiral [1-(1′R)-methylbenzyl]aziridine-2-yl]methanol. Various enantiomerically pure 2-vinylaziridines were prepared by Wittig reactions from aziridine-2-carboxaldehyde and the corresponding phosphonium salts. The C(2)-N bond of the vinyl substituted aziridine ring was regioselectively cleaved by azidotrimethylsilane (TMSN₃). The azido group and the double bond were reduced successively to give the target compounds in high yields.