Time-resolved spectroscopy of silver nanocubes: observation and assignment of coherently excited vibrational modes

The response of single crystal, cubic silver particles to ultrafast laser-induced heating has been examined experimentally and theoretically. The transient absorption traces display clear modulations due to coherently excited vibrational modes. Nanocube samples with edge lengths smaller than 50 nm show a single modulation, whereas samples larger than 50 nm show two vibrational modes. The results are compared to finite element calculations, where the cubes are modeled as having cubic crystal symmetry with the principal axes parallel to the sides of the particle. The action of the laser pulse is treated in two ways, first, as creating a uniform initial strain. In this case the predominant mode excited is the breathing mode. The period of this mode is in reasonable agreement with the vibrational periods measured for the smaller cubes and with the higher frequency modulation observed for the larger cubes. A nonuniform initial strain is also considered, which could arise from nonuniform heating for particles larger than the optical skin depth of the metal. In this case the predominant mode excited is a nontotally symmetric mode. The calculated periods from this analysis are in reasonable agreement with the lower frequency modulations observed for the larger samples. The results from this study show that, to within the accuracy of these measurements, the elastic constants of cubic silver nanoparticles are the same as bulk silver.     

Phenolic compounds,essential oil composition,and antioxidant activity of Angelica purpurascens (Avé-Lall.) Gill

In this study, methanol extracts (MEs) and essential oil (EO) of Angelica purpurascens (Avé-Lall.) Gill obtained from different parts (root, stem, leaf, and seed) were evaluated in terms of antioxidant activity, total phenolics, compositions of phenolic compound, and essential oil with the methods of 2,2-azino-bis(3ethylbenzo-thiazoline-6-sulfonic acid (ABTS•⁺), 2,2-diphenyl-1-picrylhydrazil (DPPH•) radical scavenging activities, and ferric reducing/antioxidant power (FRAP), the Folin–Ciocalteu, liquid chromatography−tandem mass spectrometry (LC−MS/MS), and gas chromatography-mass spectrometry (GC−MS), respectively. The root extract of A. purpurascens exhibited the highest ABTS•⁺, DPPH•, and FRAP activities (IC₅₀: 0.05 ± 0.0001 mg/mL, IC₅₀: 0.06 ± 0.002 mg/mL, 821.04 ± 15.96 µM TEAC (Trolox equivalent antioxidant capacity), respectively). Moreover, EO of A. purpurascens root displayed DPPH• scavenging activity (IC₅₀: 2.95 ± 0.084 mg/mL). The root extract had the highest total phenolic content (438.75 ± 16.39 GAE (gallic acid equivalent), µg/mL)). Twenty compounds were identified by LC−MS/MS. The most abundant phenolics were ferulic acid (244.39 ± 15.64 μg/g extract), benzoic acid (138.18 ± 8.84 μg/g extract), oleuropein (78.04 ± 4.99 μg/g extract), and rutin (31.21 ± 2.00 μg/g extract) in seed, stem, root, and leaf extracts, respectively. According to the GC−MS analysis, the major components were determined as α-bisabolol (22.93%), cubebol (14.39%), α-pinene (11.63%), and α-limonene (9.41%) among 29 compounds. Consequently, the MEs and EO of A. purpurascens can be used as a natural antioxidant source.     

The impact of the natural sciences on archaeology

This article reviews some of the applications of physics to the solution of archaeological problems. The use of magnetic, resistivity and electromagnetic surveying techniques for the location of buried features is described. Various methods of age determination are outlined while the problems associated with radiocarbon dating of organic material and thermoluminescent dating of pottery are discussed in detail. The techniques, including petrological examination, chemical analysis and isotopic analysis, employed in the physical examination of archaeological artefacts are described. Examples of the application of these techniques in establishing the source of the raw materials used in pottery, metal and stone implements and in elucidating the techniques of manufacture of pottery and metal objects are also given.     

Positive integer solutions of the diophantine equation x 2 − L n xy + (−1) n y 2 = ±5 r

In this paper, we consider the equation x ²?L _n x y+(?1) ⁿ y ² = ±5 ^r and determine the values of n for which the equation has positive integer solutions x and y. Moreover, we give all positive integer solutions of the equation x ²?L _n x y+(?1) ⁿ y ² = ±5 ^r when the equation has positive integer solutions.     

A TEM and XRD study of the SbNbSe3 misfit layer structures

Two new misfit layer structures have been synthesized within the Sb-Nb-Se system. Powder X-ray diffraction and electron microscopy techniques (electron diffraction, HREM, XEDS) have been used to determine the nature of their structure. According to TEM and XEDS data (for more than 15 crystals studied) both phases are monolayer type, i.e. (SbSe)1+delta (NbSe2). Electron microscopy reveals a composite modulated structure that consists of the periodical intergrowth of a pseudotetragonal SbSe layer, denominated as Q, and a pseudohexagonal layer NbSe2, denominated as H. Both layers fit along b, stack along c and do not fit along a (misfit) giving rise to an incommensurate modulation along this direction. The two phases differ in the symmetry of the Q layers being in one case orthorhombic (for delta = 0.17) and monoclinic in the other (for delta = 0.19). After the characterization of the sample by electron microscopy the unit cells of the basic layers could be refined for both phases by powder X-ray diffraction: aQ = 5.824(2) A, bQ = 5.962(5) A, cQ = 23.927(6) A, alpha = 90 degrees, beta = 90 degrees and gamma = 90 degrees and aH = 3.415(5) A, bH = 5.962(6) A,, cH = 11.962(1) A, alpha = 90 degrees, beta = 90 degrees and gamma = 90 degrees for the orthorhombic phase; aQ = 5.844(2) A, bQ = 5.981(1) A, cQ = 23.919(5) A, alpha = 90 degrees, beta = 90 degrees and gamma = 96.00(3)degrees and aH = 3.439(1) A, bH = 5.994(2) A, cH = 11.956(3) A, alpha = 90 degrees, beta = 90 degrees and gamma = 90 degrees for the monoclinic phase. The phase with the monoclinic Q-sublattice often appears as twinned crystals. The more abundant crystals are disordered intergrowths of both monolayer phases.     

Maneuvering the surface plasmon resonance of silver nanostructures through shape-controlled synthesis

Silver nanostructures are containers for surface plasmons - the collective oscillation of conduction electrons in phase with incident light. By controlling the shape of the container, one can control the ways in which electrons oscillate, and in turn how the nanostructure scatters light, absorbs light, and enhances local electric fields. With a series of discrete dipole approximation (DDA) calculations, each of a distinctive morphology, we illustrate how shape control can tune the optical properties of silver nanostructures. Calculated predictions are validated by experimental measurements performed on nanocubes with controllable corner truncation, right bipyramids, and pentagonal nanowires. Control of nanostructure shape allows optimization of plasmon resonance for molecular detection and spectroscopy.     

Efficient delivery of Cre-recombinase to neurons in vivo and stable transduction of neurons using adeno-associated and lentiviral vectors

Background

As development proceeds the human embryo attains an ever more complex three dimensional (3D) structure. Analyzing the gene expression patterns that underlie these changes and interpreting their significance depends on identifying the anatomical structures to which they map and following these patterns in developing 3D structures over time. The difficulty of this task greatly increases as more gene expression patterns are added, particularly in organs with complex 3D structures such as the brain. Optical Projection Tomography (OPT) is a new technology which has been developed for rapidly generating digital 3D models of intact specimens. We have assessed the resolution of unstained neuronal structures within a Carnegie Stage (CS)17 OPT model and tested its use as a framework onto which anatomical structures can be defined and gene expression data mapped.

Results

Resolution of the OPT models was assessed by comparison of digital sections with physical sections stained, either with haematoxylin and eosin (H&E) or by immunocytochemistry for GAP43 or PAX6, to identify specific anatomical features. Despite the 3D models being of unstained tissue, peripheral nervous system structures from the trigeminal ganglion (~300 μm by ~150 μm) to the rootlets of cranial nerve XII (~20 μm in diameter) were clearly identifiable, as were structures in the developing neural tube such as the zona limitans intrathalamica (core is ~30 μm thick). Fourteen anatomical domains have been identified and visualised within the CS17 model. Two 3D gene expression domains, known to be defined by Pax6 expression in the mouse, were clearly visible when PAX6 data from 2D sections were mapped to the CS17 model. The feasibility of applying the OPT technology to all stages from CS12 to CS23, which encompasses the major period of organogenesis for the human developing central nervous system, was successfully demonstrated.

Conclusion

In the CS17 model considerable detail is visible within the developing nervous system at a minimum resolution of ~20 μm and 3D anatomical and gene expression domains can be defined and visualised successfully. The OPT models and accompanying technologies for manipulating them provide a powerful approach to visualising and analysing gene expression and morphology during early human brain development.     

Transition Metal Ion-binding Properties of a 14-Membered N2O2S2- Macrobicyclic Ligand

The selective liquid–liquid extraction of various transition metal cations from the aqueous phase to the organic phase was carried out using a 14-membered N₂O₂S₂-macrobicycle. Metal picrates such as Pb²⁺, Co²⁺, Zn²⁺, Ni²⁺,Cu²⁺ and Cd²⁺ were used in this extraction studies. It was found that the ligand showed moderate selectivity towards Pb²⁺ only among the other metals. The extraction constant (log K _ex) was determined to be 13.8 for Pb²⁺ complex.