发动机机油滤清器虑层强度分析及优化

针对机油滤清器工作工况下进出口压差、机油滤层强度及导流桩高度等问题, 通过试验测试与仿真相结合, 对滤清器初步设计进行了评估及优化, 以确保滤清器在工作工况下进出口压降及滤层强度能满足要求. 首先进行滤层性能试验, 得到滤层的惯性阻力系数和黏性阻力系数; 再通过滤层多孔介质CFD分析, 对滤清器进出口压降进行分析计算. 结果表明: 在-18℃、25℃和70℃的工况下, 进出口压降都小于10kPa, 满足相关要求. 针对滤层的最大主应力超过其抗拉强度的问题, 通过CAE仿真分析, 优化滤层与导流桩间隙, 将滤层最大主应力由110.1MPa降至36.99MPa, 小于其抗拉强度42.8MPa.     

Observers Design for a Class of Nonlinear Stochastic Discrete-Time Systems

International Journal of Theoretical Physics - This paper mainly studied the observer design of Lipschitz stochastic discrete system. For the first time, generalized Lipschitz conditions are...     

射频等离子制备石墨烯负载Co3O4催化剂及其析氧性能研究

氢能的引入能有效提升配电网的供电可靠性,而电解水制氢是实现低碳转型的关键技术,开发高效的电解水催化剂势在必行。过渡金属氧化物储量大、催化活性高,是具有广阔应用前景的析氧反应催化剂。本文通过射频等离子体处理制备石墨烯上负载Co₃O₄析氧催化剂,XRD、Raman和XPS测试结果显示,二维结构石墨烯的引入加速表面电子迁移,增大了反应面积。等离子体处理促进了纳米粒子在石墨烯上的负载,利用等离子体刻蚀作用在催化剂表面制造出大量碳结构缺陷和氧空位结构,改善了活性位点分布,有效调控Co₃O₄电子结构,提高析氧催化活性。电化学测试表明,本文中合成的Co₃O₄@rGO在电流密度为50 mA·cm^-2时的过电位为410 mV,动力学反应速率较快,表现出优于商业IrO₂的析氧催化活性。     

A microfluidics-dispensing-printing strategy for Janus photonic crystal microspheres towards smart patterned displays

From the implementation point of view, the printable magnetic Janus colloidal photonic crystals (CPCs) microspheres are highly desirable. Herein, we developed a dispensing-printing strategy for magnetic Janus CPCs display via a microfluidics-automatic printing system. Monodisperse core/shell colloidal particles and magnetic Fe₃O₄ nanoparticles precursor serve as inks. Based on the equilibrium of three-phase interfacial tensions, Janus structure is successfully formed, followed by UV irradiation and self-assembly of colloid particle to generate magnetic Janus CPCs microspheres. Notably, this method shows distinct superiority with highly uniform Janus CPCs structure, where the TMPTA/Fe₃O₄ hemisphere is in the bottom side while CPCs hemisphere is in the top side. Thus, by using Janus CPCs microspheres with two different structural colors as pixel points, a pattern with red flower and green leaf is achieved. Moreover, 1D linear Janus CPCs pattern encapsulated by hydrogel is also fabricated. Both the color and the shape can be changed under the traction of magnets, showing great potentials in flexible smart displays. We believe this work not only offers a new feasible pathway to construct magnetic Janus CPCs patterns by a dispensing-printable fashion, but also provides new opportunities for flexible and smart displays.     

Polymeric Carbon Nitride-based Single Atom Photocatalysts for CO2 Reduction to C1 Products

Photocatalytic CO₂ reduction to C₁ fuels is considered to be an important way for alleviating increasingly serious energy crisis and environmental pollution. Due to the environment-friendly, simple preparation, easy formation of highly-stable metal-nitrogen(M-N_x) coordination bonds, and suitable band structure, polymeric carbon nitride-based single-atom catalysts(C₃N₄-based SACs) are expected to become a potential for CO₂ reduction under visible-light irradiation. In this review, we summarize the recent advancement on C₃N₄-based SACs for photocatalytic CO₂ reduction to C₁ products, including the reaction mechanism for photocatalytic CO₂ reduction to C₁ products, the structure and synthesis methods of C₃N₄-based SACs and their applications toward photocatalytic CO₂ reduction reaction(CO₂RR) for C₁ production. The current challenges and future opportunities of C₃N₄-based SACs for photoreduction of CO₂ are also discussed.     

New existence of multi-spike solutions for the fractional Schrödinger equations

Science China Mathematics - We consider the following fractional Schrödinger equation: (0.1) $${\left( { - \Delta } \right)^s}u + V\left( y \right)u = {u^p},\,\,\,\,\,\,u >...     

Strong π-π stacking interactions led to the mis-assignment of dimer emissions to the monomers of 1-acetylpyrene

Both experimental and computational studies showed owing to strong π-π stacking interactions, 1-acetylpyrene mainly exists in dimers and molecular aggregates even at low concentrations, which led to the mis-assignment of its monomer emission peaks.     

Visible-light-mediated external-reductant-free reductive cross coupling of benzylammonium salts with (hetero)aryl nitriles

Herein we report a novel visible-light-mediated external reductant-free reductive cross coupling for the construction of C sp~2–C sp~3 bonds. A variety of benzylammonium salts underwent selective coupling with(hetero)aryl nitriles to deliver important diarylmethanes under mild reaction conditions. Importantly, photocatalysts can be omitted for many cases, which might involve the electron donor acceptor(EDA) complex. Mechanistic studies indicated benzylic radicals might be involved as the key intermediates. Moreover, the in situ generated NMe_3 via cleavage of C–N bond in ammonium salts acts as the electron donor,thus avoiding the use of external-reductant.     

Enhanced 1T′-Phase Stabilization and Chemical Reactivity in a MoTe2 Monolayer through Contact with a 2D Ca2N Electride

Among the widely studied 2D transition metal dichalcogenides (TMDs), MoTe₂ has attracted special interest for phase-change applications due to its small 2H-1T′ energy difference, yet a large scale phase transition without structural disruption remains a significant challenge. Recently, an interesting long-range phase engineering of MoTe₂ has been realized experimentally by Ca₂N electride. However, the interface formed between them has not been well understood, and moreover, it remains elusive how the presence of Ca₂N would affect the basal plane reactivity of MoTe₂. To address this, we performed density functional theory (DFT) calculations to investigate the potential of tuning the phase stability and chemical reactivity of a MoTe₂ monolayer via interacting with Ca₂N to form a van der Walls heterostructure. We found that the contact nature at the 2H-MoTe₂/Ca₂N interface is Schottky-barrier-free, allowing for the spontaneous electron transfer from Ca₂N to 2H-MoTe₂ to make it strongly n-type doped. Moreover, Ca₂N doping significantly lowers the energy of 1T′-MoTe₂ and dynamically triggers the 2H-to-1T′ transformation. The Ca₂N-induced phase modulation can also be applied to tune the phase energetics of MoS₂ and MoSe₂. Furthermore, using H adsorption as the testing ground, we also find that the H binding on the basal plane of MoTe₂ is enhanced after forming heterostructure with Ca₂N, potentially providing basis for surface modification and other related catalytic applications.