Enantioselective Sulfoxidation Catalyzed by a Bisguanidinium Diphosphatobisperoxotungstate Ion Pair

The first enantioselective tungstate‐catalyzed oxidation reaction is presented. High enantioselectivities were achieved for a variety of drug‐like phenyl and heterocyclic sulfides under mild conditions with H₂O₂, a cheap and environmentally friendly oxidant. Synthetic utility was demonstrated through the preparation of (S)‐Lansoprazole, a commercial proton‐pump inhibitor. The active ion‐pair catalyst was identified to be bisguanidinium diphosphatobisperoxotungstate using Raman spectroscopy and computational studies.     

Effect of tellurium promoter on vanadium phosphate catalyst for partial oxidation of n-butane

Te-promoted (1%) vanadium phosphate catalyst (VPDTe) was prepared via VOPO4·2H2O by calcining its precursor VOHPO4·0.5H2O in a flow of n-butane/air.VPDTe catalyst has resulted a higher existence of V5+ phase with V5+/V4+ ratio of 0.23.SEM micrographs show that Te addition altered the arrangement of the platelets from "rose-like" clusters to layer with irregular shape.Te addition has also markedly lowered the reduction activation energies of the vanadium phosphate catalyst as revealed by TPR profile.The amount of active oxygen species associated with V4+ phase of the Te promoted catalyst was significantly higher than those of the unpromoted catalyst.These observations suggest that high mobility and availability of reactive oxygen species contributed to the enhancement of n-butane conversion up to 80% at 673 K,while only 47% over unpromoted catalyst (2400 h-1,1.7% n-butane in air).     

Fluid Flow Analysis of Integrated Porous Bone Scaffold and Cancellous Bone at Different Skeletal Sites: In Silico Study

The dynamic characteristic of bone is its ability to remodel itself through mechanobiological responses. Bone regeneration is triggered by mechanical cues from physiological activities that generate structural strain and cause bone marrow movement. This phenomenon is crucial for bone scaffold when implanted in the cancellous bone as host tissue. Often, the fluid movement of bone scaffold and cancellous bone is studied separately, which does not represent the actual environment once implanted. In the present study, the fluid flow analysis properties of bone scaffold integrated into the cancellous bone at different skeletal sites are investigated. Three types of porous bone scaffolds categorized based on pore size configurations: 1 mm, 0.8 mm and hybrid (0.8 mm interlaced with 0.5 mm) were used. Three different skeletal sites of femoral bone were selected: neck, lateral condyle and medial condyle. Computational fluid dynamics was utilized to analyze the fluid flow properties of bone scaffold integrated cancellous bone. The results of this study reveal that the localization and maximum value of shear stress in an independent bone scaffold are significantly different compared to the bone scaffold integrated with cancellous bone by about 160% to 448% percentage difference. Low shear stress and high permeability were found across models that have higher Tb.Sp (trabecular separation). Specimen C and femoral lateral condyle showed the highest permeability in their respective category.

     

Efficient eco-friendly syntheses of dithiocarbazates and thiosemicarbazones

ABSTRACT

Eight Schiff bases have been synthesized by conventional and three different eco-friendly methods, whereby two aromatic carbonyl compounds viz. 2-thiophenecarboxaldehyde and salicylaldehyde were reacted with S-methyl, S-benzyl, and S-n-octyl-dithiocarbazates and thiosemicarbazide. In order to evaluate the efficiency of the synthesis methods, the time to complete the reaction and the yield of the Schiff base synthezised by eco-friendly methods, such as solvent-free grinding, water as a solvent, and lemon juice as catalyst, were compared with those synthesized by the conventional method. The chemical structures of all the synthesized Schiff bases, where two of them are novel and reported for the first time, were fully characterized by a variety of physico-chemical, analytical, and spectroscopic techniques. The molecular and crystal structures of the Schiff bases especially those having 2-thiophene moiety were further elucidated by single crystal X-ray diffraction analyzes.     

Radiation efficiency of unbaffled and perforated plates near a rigid reflecting surface

The accurate prediction of sound radiation from plate-like structures remains a challenging problem. Although the case of a plate set in a rigid baffle can be solved analytically, when the plate radiates sound into free space the problem is more difficult to solve; nevertheless, several approaches have been proposed to determine the sound radiation from an unbaffled plate. The present study extends the consideration to the situation of an unbaffled plate which is located close to a rigid reflecting surface. For this purpose, Laulagnet's model for the radiation efficiency of an unbaffled plate is extended by modifying the Green's function to include an image source due to the reflecting surface. The results show that, depending on the distance between the plate and the rigid surface, the radiation efficiency is considerably reduced at low frequencies. Additional reduction of sound radiation can be achieved by introducing perforation to the plate. However, at higher frequencies, the radiation efficiency is amplified relative to that for the plate in the absence of the rigid surface, both with and without perforation. These results have also been validated experimentally.     

Simultaneous quantification of curcuminoids and xanthorrhizol in Curcuma xanthorrhiza by high-performance liquid chromatography

A new method for simultaneous quantification of curcuminoids and xanthorrhizol (XNT) in Curcuma xanthorrhiza was developed and validated using high-performance liquid chromatography with diode-array UV–Vis detector. The chromatographic separation was achieved on a Phenomenex C18 at room temperature with the mobile-phase acetonitrile ?0.001% formic acid in gradient elution system and delivered at a flow rate of 1?mL/min. Detection wavelength 425?nm was used for curcuminoids and 224?nm for XNT. System suitability, linearity, precision, accuracy, limit of detection, limit of quantitation, and stability were evaluated and were found in good agreement with Association of Official Analytical Chemists guidelines for single-laboratory validation. The proposed method was found to be precise, accurate, and reliable and also could be applied for the simultaneous quantitative analysis of curcuminoids and XNT in C. xanthorriza raw material and its herbal medicinal product.     

Processes associated with ionic current rectification at a 2D-titanate nanosheet deposit on a microhole poly(ethylene terephthalate) substrate

Films of titanate nanosheets (approx. 1.8-nm layer thickness and 200-nm size) having a lamellar structure can form electrolyte-filled semi-permeable channels containing tetrabutylammonium cations. By evaporation of a colloidal solution, persistent deposits are readily formed with approx. 10-μm thickness on a 6-μm-thick poly(ethylene-terephthalate) (PET) substrate with a 20-μm diameter microhole. When immersed in aqueous solution, the titanate nanosheets exhibit a p.z.c. of − 37 mV, consistent with the formation of a cation conducting (semi-permeable) deposit. With a sufficiently low ionic strength in the aqueous electrolyte, ionic current rectification is observed (cationic diode behaviour). Currents can be dissected into (i) electrolyte cation transport, (ii) electrolyte anion transport and (iii) water heterolysis causing additional proton transport. For all types of electrolyte cations, a water heterolysis mechanism is observed. For Ca²⁺ and Mg²⁺ions, water heterolysis causes ion current blocking, presumably due to localised hydroxide-induced precipitation processes. Aqueous NBu₄⁺ is shown to ‘invert’ the diode effect (from cationic to anionic diode). Potential for applications in desalination and/or ion sensing are discussed.

     

Advances in Biomimetic Nanoparticles for Targeted Cancer Therapy and Diagnosis

Biomimetic nanoparticles have recently emerged as a novel drug delivery platform to improve drug biocompatibility and specificity at the desired disease site, especially the tumour microenvironment. Conventional nanoparticles often encounter rapid clearance by the immune system and have poor drug-targeting effects. The rapid development of nanotechnology provides an opportunity to integrate different types of biomaterials onto the surface of nanoparticles, which enables them to mimic the natural biological features and functions of the cells. This mimicry strategy favours the escape of biomimetic nanoparticles from clearance by the immune system and reduces potential toxic side effects. Despite the rapid development in this field, not much has progressed to the clinical stage. Thus, there is an urgent need to develop biomimetic-based nanomedicine to produce a highly specific and effective drug delivery system, especially for malignant tumours, which can be used for clinical purposes. Here, the recent developments for various types of biomimetic nanoparticles are discussed, along with their applications for cancer imaging and treatments.     

Fatigue Growth Analysis of a Surface Crack in a Solid Cylinder under Combined Cyclic Axial-Torsion Loading

Experimental Techniques - In this paper, fatigue growth analyses of a surface crack in a solid cylinder under combined cyclic axial-torsion loadings through experimentation and numerical simulation...     

SMARTer for magnetic structure studies

SMARTer, a 36-meter small angle neutron scattering (SANS) spectrometer was installed at the Neutron Scattering Laboratory (NSL), National Nuclear Energy Agency of Indonesia — BATAN in Serpong, Indonesia and has performed the experiment for studying the magnetic structures of Cu(NiFe), CuCo and FeSiBNbCu metal alloys. The experiments were conducted at room temperature and up to 1 T (10 kOe) of external magnetic field. At zero fields, isotropic scattering identified as nuclear scattering is dominant. When a magnetic field is applied in a horizontal direction perpendicular to the neutron beam, the response of the magnetic scattering permits extraction of the field-induced re-arrangement of the magnetic moment. With increasing field the distortion is more pronounced and the magnetic scattering dominates the intensity and affects the peak position. Radial and angular averaging from experimental data are given to show the details of magnetic structures.