Approximation of transformation media-based reshaping action by genetic optimization

The aim of this paper is to study the laser-induced backside wet cleaning techniques for glass substrates. Two kinds of laser cleaning techniques are proposed in this study. The first involves applying an Nd:YAG laser to the backside of the substrate which is submerged in water. A metal plate is placed below the glass substrate. Most of the laser energy will be absorbed by the metal plate. The metal then vaporizes the water and generates a turbulent bubble flow. The bubble flow removes the alumina particles from the surface of the glass substrate. The second involves using a CO₂ laser to generate turbulent bubble flow to remove the particles. Both methods were successfully demonstrated for the removal of submicron particles of 0.5 μm in size. The phenomena of bubble generation and diffusion are presented in the paper. Because the laser is applied to the backside of the substrate, the damage due to the laser heat can be significantly reduced. The quality and efficient of the backside processing is better than those of the front side processing. The proposed techniques have great potential to provide an improved solution for glass cleaning.     

Synthesis of Chiral Calix[4]arene Derivative and Evaluation of its Recognition Properties

The article describes the synthesis and extraction properties of a new chiral calix[4]arene Schiff base ligand 5, which has been synthesized from 5,17-diformyl-25,27-bis-(4-nitrobenzyloxy)-26,28-dihidroxycalix[4]arene (4) by treatment with (S)-(-)-1-phenylethylamine. In this synthesis, it was thought to explore the role of chiral, as well as Schiff base sites in the recognition of targeted species ions (such as dichromate anions) as well as neutral/chiral molecules. At low pH, the ligand 5 is more effective for transferring the dichromate anions from an aqueous into a dichloromethane layer; may be due to the protonation of nitrogen atoms.

The extraction properties of ligand 5 towards the some selected α -amino acid methylesters are also reported. However, the ligand 5 did not display any selectivity towards the selected α-amino acid methylesters.     

A Bifunctional B,N-Based Asymmetric Catalytic Nitrostyrene-Michael Addition Acting through a 10-Membered Ring Cyclic Transition State

The B,N-bifunctional catalyst homoboroproline has been applied to a catalytic asymmetric nitroalkene-Michael addition to β-nitrostyrene analogues, showing broad substrate tolerance, high conversions and moderate to good asymmetric induction. The ability of homoboroproline to act as an efficient catalyst based on enamine-formation of the secondary amine, coupled with intramolecular Lewis-acid chelation of the nitro function, in a non-FLP manner, to effect efficient and enantioselective catalysis via a proposed large 10-membered ring transition state is remarkable and reinforced by theoretical calculations.     

Structure–reactivity relationships of alkyl α‐hydroxymethacrylate derivatives

A series of alkyl α‐hydroxymethacrylate derivatives with various secondary functionalities (ether, ester, carbonate, and carbamate) and terminal groups (alkyl, cyano, oxetane, cyclic carbonate, phenyl and morpholine) were synthesized to investigate the effect of intermolecular interactions, H‐bonding, π–π interactions, and dipole moment on monomer reactivity. All of the monomers except one ester and one ether derivative are novel. The polymerization rates, determined by using photo‐DSC, showed the average trend (aromatic carbamate > hydroxyl > ester > carbonate ～ aliphatic carbamate ～ ether), with several exceptions due to the differences in terminal groups. There is a correlation between the chemical shift differences of the double bond carbons, the calculated dipole moments, and the reactivities only for nonhydrogen bonded monomers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Detecting organic vapors using a conductometric sensor prepared from Ardel®D-100 and graphite

The composites of graphite with Ardel^?D-100 which is a trademark of a polyester of bisphenol-A with terephthalic and isophthalic acid were used as a sensing material in a conductometric vapor sensor. The magnitudes of responses are increased in the order of benzene, isobutyl acetate, isoamyl acetate, ethyl benzene and chloro benzene. This suggests that Ardel^?D-100 can be used as a sensing material for chlorobenzene, ethyl benzene and isoamyl acetate. On the other hand, specific retention volumes of the sensed vapors on Ardel^?D-100 coated on graphite were determined by inverse gas chromatography at temperatures between 200 and 260 °C. The distribution coefficient, K _s of the vapors between stationary and mobile phases in the column was obtained. It was revealed for the first time that the logarithm of K _s of the solvents varies almost linearly with their responses based on conductometric resistance of the sensing polymer composite. Subsequently, the study suggests that gas chromatographic retention data can be used in prediction of the conductometric responses of a polymeric sensor to vapors. Correspondence: Ferdane Karaman, Department of Chemistry, Yildiz Technical University, 34220 Istanbul-Esenler, Turkey     

In situ PM‐IRRAS studies of organothiols and organosilane monolayers–ZnO interfaces at high water activities

In situ photoelastic‐modulated Fourier transform infrared reflection absorption spectroscopy has been applied for the investigation of interfacial stability of organothiol and organosilane monolayer films on nanocrystalline zinc oxide thin films. It has been shown that for octadecyltriethoxysilane films, exposure to high water activities results in physisorption of water in the cross‐linked film. This high water activity at the interface leads to a reversible wet de‐adhesion of the interfacial silanol groups from the ZnO surface. However, the organothiol seems to form a denser monolayer and a stable by S–Zn bond that is resistant to the competition with adsorbed water. The reversible attachment for cross‐linked organosilanol films has been demonstrated for the first time by means of an in situ spectroscopic method on model ZnO surfaces. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and Spectroscopic Characterization of Fluorescent Boron Dipyrromethene-Derived Hydrazones

Derivatives of 4,4-difluoro-4-bora-3a,4a,diaza-s-indacene (BODIPY? or BDP) that possess a hydrazine substituent on position 5 are potential "turn-on" fluorophores for labeling aldehydes The unnatural amino acid L-3-formyltyrosine can be incorporated into a protein or peptide; thus, these hydrazines are potentially site specific labels for such polymers. In this work, model compounds were synthesized to assess whether the photochemical properties of the BDP-hydrazone would be suitable for protein labeling. Hydrazones were synthesized from the fluorophore 3-chloro-5-hydrazino-BDP and different aldehydes, and the absorption and emission spectra of the products were compared. The hydrazone of an unsubstituted aromatic aldehyde displays absorption and emission maxima (531 nm and 559 nm, respectively in dioxane) that are red shifted relative to those of a hydrazone from an aliphatic aldehyde (513 nm and 543 nm, respectively, in dioxane) and an increased quantum yield (0.21 vs. 0.11, respectively, in dioxane). The presence of a hydroxyl group ortho- to the aldehyde produces a hydrazone in which the absorption and emission maxima are slightly red shifted (528 nm and 564 nm, respectively in dioxane) from the unsubstituted aromatic hydrazone, but the quantum yields of the two hydrazones are equivalent. Thus, an ortho-hydroxy substituted aromatic aldehyde is a suitable electrophile for "turn on" protein labeling using the hydrazino-BDP. The specificity of this labeling reaction for the unnatural amino acid was demonstrated through fluorescent labeling of just the 3-formyltyrosine-containing α-subunit of α,β-tubulin.     

Urea dimethacrylates functionalized with bisphosphonate/bisphosphonic acid for improved dental materials

Incorporation of bisphosphonate/bisphosphonic acid groups in dental monomer structures should increase interaction of these monomers with dental tissue as these groups have strong affinity for hydroxyapatite. Therefore, new urea dimethacrylates functionalized with bisphosphonate (1a, 1b) and bisphosphonic acid (2a, 2b) groups are synthesized and evaluated for dental applications. Monomers 1a and 1b are synthesized from 2‐isocyanatoethyl methacrylate (IEM) and two bisphosphonated amines (BPA1 and BPA2), prepared as reported elsewhere. Selective dealkylation of the bisphosphonate ester groups of 1a and 1b using trimethylsilyl bromide (TMSBr) gives monomers (2a and 2b) with bisphosphonic acid functionality. X‐ray diffractometer (XRD), Raman spectroscopy, and X‐ray photoelectron spectroscopy (XPS) analyses of monomer‐treated HAP particles show that 2a induces formation of stable monomer‐calcium salts, similar to 10‐methacryloyloxydecyl dihydrogen phosphate (MDP), with higher chemical interaction than 2b. The photopolymerization studies indicate good copolymerizability with commercial dental monomers. In vitro studies on NIH 3T3 mouse embryonic fibroblast cells have clearly shown that the tested monomers (1b and 2b) are not toxic according to the MTT standards. All these properties make these monomers suitable as biocompatible cross‐linkers/adhesives for dental applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3195–3204