Screening of urban aerosol particulate composites for selected metal distribution and their dependence on meteorological parameters

Local atmospheric aerosol particulate samples, collected as composites on daily 6-12 hour basis, at Quaid-i-Azam University campus, Islamabad, Pakistan, using high volume sampling technique, were analysed for Pb, Na, K, Fe, Mn, Cd, Cr, Ni, Zn and Co by FAAS method. The monitoring period ran from October, 2001 through March, 2002, with a total of 105 samples collected on cellulose filters, treated in part with the HNO3-based wet digestion method for metal quantification, and for particle size distribution separately. The metal content of the aerosols was examined in relation to dependence on meteorological parameters, such as temperature, relative humidity, wind speed, sun shine and pan evaporation. Statistical correlation analysis was conducted for multiple metal pairs in aerosols, and the data were examined in relation to meteorological parameters and relevant aerosol particle size fractions. The study revealed no viable strong correlation between the meteorological parameters and metal levels; in general, however, a significant positive correlation was found for temperature. A strong positive correlation was observed for PM<25 and PM2.5-10. For coarse particles (PM10-100 and PM>100), however, a negative correlation was observed. The levels of Na, K, Fe and Zn were found in the range of 1-5 microg/m3 while those for the rest of the metals in the sub microg/m3 range. Principal component analysis and cluster analysis were performed on dataset for source identification and appointment. Largest contribution (33%) was shown by the industrial emissions followed by traffic/road dust (16.7%).     

Exploring the Potential of Metallodrugs as Chemotherapeutics for Triple Negative Breast Cancer

This review focuses on studies of coordination and organometallic compounds as potential chemotherapeutics against triple negative breast cancer (TNBC) which has one of the poorest prognoses and worst survival rates from all breast cancer types. At present, chemotherapy is still the standard of care for TNBC since only one type of targeted therapy has been recently developed. References for metal-based compounds studied in TNBC cell lines will be listed, and those of metal-specific reviews, but a detailed overview will also be provided on compounds studied in vivo (mostly in mice models) and those compounds for which some preliminary mechanistic data was obtained (in TNBC cell lines and tumors) and/or for which bioactive ligands have been used. The main goal of this review is to highlight the most promising metal-based compounds with potential as chemotherapeutic agents in TNBC.     

Microbiological Transformation of L-Tyrosine to L-Dopa from Methanol Pretreated Biomass of a Novel Coriolus versicolor under Submerged Culture

The present study is concerned with the microbiological transformation of L-tyrosine to L-dopa by a newly isolated turkey tail mushroom Coriolus versicolor DOB-4. As tyrosinase (catechol oxidase, EC 1.10.3.1) is an extracellular enzyme, therefore biomass was used as an enzyme source in the reaction mixture. Biomass particles were pretreated with methanol and oven dried at 105 °C for 2 h. The optimal L-dopa production was achieved when 1.5 mg/ml L-tyrosine was used as the basal substrate. Thin layer chromatography and high-performance liquid chromatography analysis depicted that citric acid supports higher substrate conversion and product formation rates. A noticeable enhancement was observed when process parameters viz. L-tyrosine concentration (1.5 mg/ml), citric acid (1.5 mg/ml), time of incubation (50 min), and reaction temperature (60 °C) were optimized using Plackett–Burman design. The maximum production of L-dopa was found to be 0.872 mg/ml with L-tyrosine consumption of 1.002 mg/ml. The model terms were found highly significant (HS, p?≤?0.05), suggesting the potential commercial utility of the culture (df?=?3, LSD?=?0.342).     

A Facile Method to Prepare Double‐Layer Isoporous Hollow Fiber Membrane by In Situ Hydrogen Bond Formation in the Spinning Line

A double‐layer hollow fiber is fabricated where an isoporous surface of polystyrene‐block‐poly(4‐vinylpyridine) is fixed on a support layer by co‐extrusion. Due to the sulfonation of the support layer material, delamination of the two layers is suppressed without increasing the number of subsequent processing steps for isoporous composite membrane formation. Electron microscope‐energy‐dispersive X‐ray spectroscopy images unveil the existence of a high sulfur concentration in the interfacial region by which in‐process H‐bond formation between the layers is evidenced. For the very first time, our study reports a facile method to fabricate a sturdy isoporous double‐layer hollow fiber.

     

Preparation of gelatin/poly(vinyl alcohol) film modified by methyl methacrylate and gamma irradiation

The properties of gelatin–polyvinyl alcohol (G–PVA) blend films were improved by methyl methacrylate (MMA) and γ irradiation for a practical viewpoint. The films were prepared by the casting method, modified by glycerol and MMA monomer, and their mechanical properties were also studied. The gelatin-based films were successfully prepared using γ irradiation (3.1 kGy) and gelatin: PVA = 97:3 (w/w) as optimized. Tensile properties of the films were studied and thermal properties of the films were characterized by thermogravimetric analysis and dynamic mechanical analysis pointed out that MMA treated both gelatin films, and G–PVA blend films showed less thermal degradation than untreated films. In addition, structural and morphological features of the gelatin-based films were examined by Fourier transform infrared and scanning electron microscopy, respectively. The ultimate results of the present study showed remarkable enhancement in tensile properties (> 40%) and a reduction in elongation at break of the films, thanks to the MMA addition and γ irradiation.     

A green synthetic approach toward the synthesis of structurally diverse spirooxindole derivative libraries under catalyst-free conditions

A catalyst-free green methodology for the synthesis of pharmacologically important spirooxindole derivatives has been developed by a three-component domino reaction between isatin, various amino compounds, and 1,3-dicarbonyl or 3-phenylisoxazolone compounds in ethyl l-lactate medium at room temperature. This new efficient synthetic method facilitated the formation of a wide range of biologically significant spirooxindole derivatives (including 17 new spirooxindoles) under very mild conditions. The cytotoxic activity of one of the isoxazole-fused spirooxindoles was evaluated in MDA-MB 468 breast cancer cell line. It was found that cell survivability decreases with increasing concentration of the selected compound in MDA-MB 468 breast cancer cells.     

Spherical indentation analysis of stress relaxation for thin film viscoelastic materials

The mechanical testing of thin layers of soft materials is an important but difficult task. Spherical indentation provides a convenient method to ascertain material properties whilst minimising damage to the material by allowing testing to take place in situ. However, measurement of the viscoelastic properties of these soft materials is hindered by the absence of a convenient yet accurate model which takes into account the thickness of the material and the effects of the underlying substrate. To this end, the spherical indentation of a thin layer of viscoelastic solid material is analysed. It is assumed that the transient mechanical properties of the material can be described by the generalised standard linear solid model. This model is incorporated into the theory and then solved for the special case of a stress relaxation experiment taking into account the finite ramp time experienced in real experiments. An expression for the force as a function of the viscoelastic properties, layer thickness and indentation depth is given. The theory is then fitted to experimental data for the spherical indentation of poly(dimethyl)siloxane mixed with its curing agent to the ratios of 5:1, 10:1 and 20:1 in order to ascertain its transient shear moduli and relaxation time constants. It is shown that the theory correctly accounts for the effect of the underlying substrate and allows for the accurate measurement of the viscoelastic properties of thin layers of soft materials.     

First principles investigation of protactinium-based oxide-perovskites for flexible opto electronic devices

The structural,elastic,mechanical,electronic,and optical properties of KPaO_3 and RbPaO_3 compounds are investigated from first-principles calculations by using the WIEN2 k code in the frame of local density approximation(LDA) and generalized gradient approximation(GGA).The calculated ground state quantities,such as lattice constant(α_0),ground state energy(E),bulk modulus(S),and their pressure derivative(B_p) are in reasonable agreement with the present analytical and previous theoretical results and available experimental data.Based on several elastic and mechanical parameters,the structural stability,hardness,stiffness and the brittle and ductile behaviors are discussed,which reveal that protactiniumbased oxide series of perovskites is mechanically stable and possesses weak resistance to shear deformation compared with resistance to unidirectional compression while flexible and covalent behaviors are dominated in them.The analysis of band profile through Trans-Blaha modified Becke-Johnson(TB-mBJ) potential highlights the underestimation of bandgap with traditional density functional theory(DFT) approximation.Specific contribution of electronic states is investigated by means of total and partial density of states and it can be evaluated that both compounds are(Γ-Γ) direct bandgap semiconductors.All fundamental optical properties are analyzed while attention is paid to absorption and reflection spectra to explore extensive absorptions and reflections of these compounds in high frequency regions.The present method represents an influential approach to calculating the whole set of elastic,mechanical,and opto-electronic parameters,which would conduce to the understanding of various physical phenomena and empower the device engineers to implement these materials in flexible opto-electronic applications.     

Formation of solitons and shocks in toroidal ion temperature gradient mode in the presence of non-Maxwellian electrons

Linear and nonlinear phenomena are investigated in toroidal ion temperature gradient (TITG)-driven pure drift mode. The model includes inhomogeneity in background magnetic field, ion temperature, and density. Finite Larmor radius effect is incorporated to understand the effect of low-frequency wave on ion dynamics. Electrons are assumed to follow nonthermal distribution, that is, kappa and Cairns distributions. Dispersion relation is obtained to analyse the linear behaviour of the TITG mode in the presence of non-Maxwellian electron distribution. In the nonlinear regime, exact solutions (soliton and shocks) are obtained (in dispersive and dissipative medium respectively) by using functional variable method to solve the nonlinear partial differential equation obtained for the system under consideration. Graphical illustrations are used to exhibit the characteristics of linear and nonlinear structures and their dependence on different physical parameters. It is observed that for TITG-driven pure drift mode, rarefactive solitons are formed for both thermal and nonthermal electron distributions. It is also observed that variation of electrons from standard thermal distribution affects the propagation characteristics of linear and nonlinear structures in TITG-driven modes. Results of our investigations will be helpful to understand the low-frequency waves in inhomogeneous plasmas in the presence of nonthermal electron distributions which are frequently observed by satellite missions and are also observed in laboratory plasmas.