Synthesis of Functionalized Tetrahydropyridines by SnCl4-Mediated [4+2] Cycloaddition between Donor–Acceptor Cyclobutanes and Nitriles

Cycloadditions of strained carbocycles promoted by Lewis acids are powerful methods to construct heterocyclic frameworks. In fact, the formal [3+2] cycloadditions of donor–acceptor (DA) cyclopropanes with nitriles has seen particular success in synthesis. In this work, we report on the first [4+2] cycloaddition of nitriles with DA cyclobutanes by Lewis acid activation. Tetrahydropyridine derivatives were obtained in up to 91 % yield from various aryl-activated cyclobutane diesters and aliphatic or aromatic nitriles.     

Crystal Structure of 3-[1-(4-Methylphenyl)-9,10-dihydro-4-azaphenanthren-3-yl]benzo[f]coumarin

Crystallography Reports - The crystal structure of the title compound is determined by single crystal X-ray structure analysis. The structure was solved by direct method and refined to a final...     

Stability-indicating RP-HPLC method development and validation for determination of nine impurities in apixaban tablet dosage forms. Robustness study by quality by design approach

A quality by design (QbD) based high-resolution HPLC method is described for determination of impurities in apixaban (APX) in the tablet dosage form. Employing a simple and stability-indicating HPLC method, nine known impurities were quantified with good peak resolution. Mobile phase A (MP-A) was prepared with buffer and acetonitrile 90:10 v/v, while mobile phase B (MP-B) contained water and acetonitrile 10:90 v/v. The gradient program was 0 min, MP-A 75%, B 25%; 20 min, MP-A 65%, B 35%; 30 min, MP-A 40%, B 60%; 40min, MP-A 40%, B 60%; 42 min, MP-A 75%, B 25%; and 50 min, MP-A 75%, B 25%. The chromatographic separation was achieved using a Zorbax RX C₁₈ 250 × 4.6 mm column, 5 μm (1.0 ml min⁻¹, 280 nm, 50 μl) and a column temperature of 40°C. Several separation studies were carried out using design of experiments to optimize the method. Validation results confirm the applicability of the developed method for quality analysis and stability studies of the regular product on the manufacturing stream.     

Development,stability-indicating assessment,and evaluation of influential method conditions using a full factorial design for the determination of Nintedanib esylate-related impurities

The design of an appropriate analytical method for assessing the quality of pharmaceuticals requires a deep understanding of science, and risk evaluation approaches are appreciated. The current study discusses how a related substance method was developed for Nintedanib esylate. The best possible separation between the critical peak pairs was achieved using an X-Select charged surface hybrid Phenyl Hexyl (150 × 4.6) mm, 3.5 μm column. A mixture of water, acetonitrile, and methanol in mobile phase-A (70:20:10) and mobile phase-B (20:70:10), with 0.1% trifluoroacetic acid and 0.05% formic acid in both eluents. The set flow rate, wavelength, and injection volumes were 1.0 ml/min, 285 nm, and 5 μl, respectively, with gradient elution. The method conditions were validated as per regulatory requirements and United States Pharmacopeia general chapter < 1225 >. The correlation coefficient for all impurities from the linearity experiment was found to be > 0.999. The % relative standard deviation from the precision experiments ranged from 0.4 to 3.6. The mean %recovery from the accuracy study ranged from 92.5 to 106.5. Demonstrated the power of the stability-indicating method through degradation studies; the active drug component is more vulnerable to oxidation than other conditions. Final method conditions were further evaluated using a full-factorial design. The robust method conditions were identified using the graphical optimization from the design space.     

Synthesis of Zinc Oxide Nanoparticles Using Rubus fairholmianus Root Extract and Their Activity against Pathogenic Bacteria

Recently, the biosynthesis of zinc oxide nanoparticles (ZnO NPs) from crude extracts and phytochemicals has attracted much attention. Green synthesis of NPs is cost-effective, eco-friendly, and is a promising alternative for chemical synthesis. This study involves ZnO NPs synthesis using Rubus fairholmianus root extract (RE) as an efficient reducing agent. The UV spectrum of RE-ZnO NPs exhibited a peak at 357 nm due to intrinsic bandgap absorption and an XRD pattern that matches the ZnO crystal structure (JCPDS card no: 36-1451). The average particle size calculated from the Debye–Scherrer equation is 11.34 nm. SEM analysis showed that the RE-ZnO NPs spherical in shape with clusters (1–100 nm). The antibacterial activity of the NPs was tested against Staphylococcus aureus using agar well diffusion, minimum inhibitory concentration, and bacterial growth assay. The R. fairholmianus phytochemicals facilitate the synthesis of stable ZnO NPs and showed antibacterial activity.     

Organotin (IV) complexes derived from tridentate Schiff base ligands: Synthesis,spectroscopic analysis,antimicrobial and antioxidant activity

Organotin complexes of Schiff bases (derived from the condensation of hydrazides with salicylaldehyde derivatives) were prepared and their characterization was done using several spectroscopic techniques like FTIR, NMR (¹H, ¹³C, and ¹¹⁹Sn) and mass spectrometry. The spectroscopic data of the ligands and their corresponding complexes revealed that the Schiff bases chelated to the tin metal in a tridentate manner through –ONO atoms (oxygen atom of the hydroxyl group of the salicylaldehydic derivatives, the nitrogen atom of azomethine group, and the oxygen atom of enolic group present in the carboxylic acid hydrazides). Around tin atom pentacoordinated geometry was exhibited. The synthesized ligands and their complexes have been assessed for their biological potency (antibacterial, antifungal and antioxidant using Ciprofloxacin, Fluconazole and Ascorbic acid as reference compounds) and few of the compounds showed optimistic activity. The ligands having electron withdrawing group attached showed greater antimicrobial activity as compared to the other ligands. The complexes showed the better activity than the ligands. The general trend followed by the complexes was diphenyl ?> ?dibutyl ?> ?dimethyl substituted complexes. Compound 11 was the most active against microbes. The antioxidant activity increased with electron donating group. The phenyl substituted complexes showed better activity as compared to the dibutyl and dimethyl substituted complexes. Compound 20 was the best antioxidant.     

Favipiravir (SARS-CoV-2) degradation impurities: Identification and route of degradation mechanism in the finished solid dosage form using LC/LC–MS method

Favipiravir finished dosage was approved for emergency use in many countries to treat SARS-CoV-2 patients. A specific, accurate, linear, robust, simple, and stability-indicating HPLC method was developed and validated for the determination of degradation impurities present in favipiravir film-coated tablets. The separation of all impurities was achieved from the stationary phase (Inert sustain AQ-C18, 250 × 4.6 mm, 5-μm particle) and mobile phase. Mobile phase A contained KH₂PO₄ buffer (pH 2.5 ± 0.05) and acetonitrile in the ratio of 98:2 (v/v), and mobile phase B contained water and acetonitrile in the ratio of 50:50 (v/v). The chromatographic conditions were optimized as follows: flow rate, 0.7 mL/min; UV detection, 210 nm; injection volume, 20 μL; and column temperature, 33°C. The proposed method was validated per the current International Conference on Harmonization Q2 (R1) guidelines. The recovery study and linearity ranges were established from the limit of quantification to 150% optimal concentrations. The method validation results were found to be between 98.6 and 106.2% for recovery and r² = 0.9995–0.9999 for linearity of all identified impurities. The method precision results were achieved below 5% of relative standard deviation. Forced degradation studies were performed in chemical and physical stress conditions. The compound was sensitive to chemical stress conditions. During the study, the analyte degraded and converted to unknown degradation impurities, and its molecular mass was found using the LC–MS technique and established degradation pathways supported by reaction of mechanism. The developed method was found to be suitable for routine analysis of research and development and quality control.     

An elastic wave scattering problem relating to the rapid movement of a fracture in a plate: Part II — Numerical results

In Part I of this two part paper, we developed analytical expressions for the crack face displacements due to an applied point traction as well as a moving point source of dilatation. In this sequel to Part I, we present numerical results for the crack face displacements in the form of displacement-time records at fixed locations on the crack face. For the stationary point traction problem, the results are more or less in keeping with the predictions made in Part I, with the Rayleigh pulse giving a large contribution for an applied step load.In the case of the moving point microfracture with a step time dependence, in addition to the diffracted compressional, shear and Rayleigh arrivals there is observed the evolution of a new pulse whose amplitude and position on the time record shifts changes if the calculations are done for a different crack speed. Results are also presented for a microfracture with an oscillatory time dependence. Once again, the first arrival of the surface pulse appears to be the most prominent arrival on the record. Further explorations of the parameters and source functions would be required before comparisons with experimental data can be made.     

Stability‐indicating HPLC method for simultaneous quantification of 14 impurities in excedrin tablet formulations and identification of new impurity by LC–MS in accelerated stability studies

We developed novel stability‐indicating HPLC method for simultaneous estimation of 14 impurities in excedrin tablet, a formulation with a combination of acetaminophen, aspirin, and caffeine. In addition, a new impurity that was generated through degradation of aspirin at high temperatures during the accelerated stability conditions was positively identified and confirmed, using liquid chromatography–mass spectrometry technique. The HPLC method was optimized using the Inertsustain C₁₈, 250 × 4.6 mm, 5.0 μm column, employing simple gradient method. Forced degradation studies were performed under acidic, basic, oxidative and thermal conditions to prove the scope and stability‐indicating the nature of the method. The optimized method was validated as per the International Conference on Harmonization guidelines. The HPLC method showed linearity from LOQ concentration to 21 μg mL^?1. Precision and intermediate precision values were <5% RSD. The validated HPLC method is currently applied for the routine testing of excedrin tablet formulations in quality control laboratories.