Alkanol-based supramolecular solvent microextraction of organophosphorus pesticides and their determination using high-performance liquid chromatography

A sensitive method for extraction and determination of three organophosphorus pesticides (chlorpyrifos, diazinon, phosalone) using a supramolecular solvent (SUPRAS) made of inverted hexagonal aggregates of alkanol and high-performance liquid chromatography with ultraviolet detection (HPLC–UV) was developed. The studied factors were alkanol amount, THF percentage (v/v), pH and vortex time. According to the full factorial design results, the effective parameters were alkanol amount, THF percentage (v/v) and pH. Then, a CCF was applied to obtain optimal conditions. The optimized conditions were obtained at 100 mg of alkanol, 5% of THF and pH 3.9. The limits of detection of pesticides were 0.5–1.3 ng/mL. The linearity was 1.6–500.0 ng/mL for different pesticides. Relative standard deviations for intra- and inter-day extraction of pesticides were 3.3–5.0 and 5.1–6.3, respectively, for five measurements. The method was also successfully applied for the determination of the pesticides in fruit juice and tap water samples.     

Position calculation of the frequency band gap in the finite photonic crystal with multiple alternations using boundary element method

In this paper, the wave transmission from finite photonic crystals with multiple alternations is investigated using boundary element method (BEM). Since that, in these structures the alternation is not in all directions of space; the investigations of the frequency band gap with desired accuracy are not practical by analytical methods. Also, the frequency dispersion of dielectric rods is an effective parameter in photonic crystals, which this effect in our calculations has been considered. Due to the high capabilities of the BEM, the transmitted wave spectrum in the photonic crystal is calculated by changing the geometrical and optical parameters of the photonic crystal and applying more alternation in its structure and the position and width of the frequency band gap is investigated. Then, it is assumed that the photonic crystal with an arbitrary angle is rotated around the axis which is perpendicular on the crystal cross section and then, it is irradiated with a plan wave. The band gap of the photonic crystals with the desired structure, desired rotation angle and multiple alternations have been solved. Very low information volume, high speed and accuracy during the calculation and useable for any desired structures are the characteristics of this method.     

Synthesis of molecularly imprinted polypyrrole as an adsorbent for solid‐phase extraction of warfarin from human plasma and urine

The aim of this work was to develop a method for the clean‐up and preconcentration of warfarin from biological sample employing a new molecularly imprinted polymer (MIP) as a selective adsorbent for solid‐phase extraction (SPE). This MIP was synthesized using warfarin as a template, pyrrole as a functional monomer and vinyl triethoxysilane as a cross‐linker. The molar ratio of 1:4:20 (template–functional monomer–cross‐linker) showed the best results. Nonimprinted polymers (NIPs) were prepared and treated with the same method, but in the absence of warfarin. The prepared polymer was characterized by Fourier transmission infrared spectrometry and scanning electron microscopy. An adsorption process (SPE) for the removal of warfarin using the fabricated MIPs and NIPs was evaluated under various conditions. Effective parameters on warfarin extraction, for example, type and volume of elution solvent, pH of sample solution, breakthrough volume and maximum loading capacity, were studied. The limits of detection were in the range of 0.0035–0.0050 µg mL^?1. Linearity of the method was determined in the range of 0.0165–10.0000 µg mL^?1 for plasma and 0.0115–10.0000 µg mL^?1 for urine with coefficients of determination (R²) ranging from 0.9975 to 0.9985. The recoveries for plasma and urine samples were >95%. Copyright © 2015 John Wiley & Sons, Ltd.     

Polyamide as an efficient sorbent for simultaneous interference-free determination of three Sudan dyes in saffron and urine using high-performance liquid chromatography-ultra violet detection北大核心CSCD

With polyamide( PA)as an efficient sorbent for solid phase extraction( SPE)of Sudan dyes II,III and Red 7B from saffron and urine,their determination by HPLC was performed. The optimum conditions for SPE were achieved using 7 mL methanol/water( 1:9,v/v,pH 7)as the washing solvent and 3 mL tetrahydrofu-ran for elution. Good clean-up and high( above 90%)recoveries were observed for all the analytes. The opti-mized mobile phase composition for HPLC analysis of these compounds was methanol-water( 70:30,v/v). The SPE parameters,such as the maximum loading capacity and breakthrough volume,were also determined for each analyte. The limits of detection( LODs),limits of quantification( LOQs),linear ranges and recoveries for the analytes were 4. 6-6. 6 μg/L,13. 0-19. 8 μg/L,13. 0-5 000 μg/L( r2> 0. 99)and 92. 5% -113. 4%,respec-tively. The precisions( RSDs)of the overall analytical procedure,estimated by five replicate measurements for Sudan II,III and Red 7B in saffron and urine samples were 2. 3%,1. 8% and 3. 6%,respectively. The developed method is simple and successful in the application to the determination of Sudan dyes in saffron and urine sam-ples with HPLC coupled with UV detection.     

Synthesis of magnetic nanoparticle‐based molecularly imprinted polymer as a selective sorbent for efficient extraction of ezetimibe from biological samples

In the present study, a novel and efficient adsorbent constructed of molecularly imprinted polymer on the surface of modified magnetic nanoparticles with oleic acid (MNPs) was applied for the selective extraction of ezetimibe. The magnetic molecularly imprinted polymer (MMIP) was polymerized at the surface of modified MNPs using methacrylic acid as functional monomer, ezetimibe as template and ethylene glycol dimethacrylate as cross‐linker. The resulting MMIP showed high adsorption capacity, good selectivity and fast kinetic binding for the template molecule. It was characterized by Fourier transform infrared analysis, scanning electron microscopy and transmission electron microscopy methods. The maximum adsorption capacity of MMIP was obtained as 137.1 mg g^?1 and it took about 20 min to achieve the equilibrium state. The adsorption model of the adsorbent was fitted with the Freundlich and Langmuir isotherm equations. The assay exhibited a linear range of 0.003–20.000 mg L^?1 for ezetimibe with a correlation coefficient of 0.995. The relative standard deviations for the recoveries were <5.2. The method was also examined for the analysis of ezetimibe in the biological samples.     

Three-Component Reaction for an Efficient Synthesis of Stable Phosphorus Ylides Using Mercapto Compounds

Stabilized phosphorus ylides were obtained from the three-component reaction between dialkyl acetylenedicarboxylate and sulfur compounds such as pyridine-2-thione, 2-furylmethanethiol, ethanedithioamide, and N-phenyl-1,2,4-triazole-3-thiol in the presence of triphenylphosphine in excellent yields.     

Comparison of C18 silica and multi‐walled carbon nanotubes as the adsorbents for the solid‐phase extraction of Chlorpyrifos and Phosalone in water samples using HPLC

A comparison between C₁₈ silica and multi‐walled carbon nanotubes (MWCNTs) in the extraction of Chlorpyrifos and Phosalone in environmental water samples was carried out using HPLC. Parameters affecting the extraction were type and volume of elution solvent, pH and flow rate of sample through the adsorbent. The optimum conditions obtained by C₁₈ cartridge for adsorption of these pesticides were 4 mL dichloromethane as elution solvent, sample pH of 5, flow rate of 1 mL/min, and those for MWCNT cartridge were 3 mL dichloromethane, pH of 5 and flow rate of 10 mL/min, respectively. Optimized mobile phase for separation and determination of these compounds by HPLC was methanol/water (80:20 v/v) with pH=5 (adjusted with phosphate buffer). Under optimal chromatographic and SPE conditions, LOD, linear range and precision (RSD n=8) were 3.03×10^?3, 0.01–5.00 μg/mL and 2.7% for Chlorpyrifos and 4.03×10^?4, 0.01–5.00 μg/mL and 2.3% for Phosalone, in C₁₈ cartridge, respectively. These values for MWCNT were 4.02×10^?6, 0.001–0.500 μg/mL and 1.8% for Chlorpyrifos and 1.02×10^?6, 0.001–0.500 μg/mL and 1.5% for Phosalone, respectively.