A new formulation for fictitious mass of viscous dynamic relaxation method

Abstract

In this article, a new relationship is proposed for the fictitious mass of viscous dynamic relaxation (DR) method. First, incremental equations are derived for DR steps. Using transformed Gershgörin theory, a new relationship is achieved for fictitious mass of viscous DR by formulating modified time step ratio. This procedure presents a new algorithm for the viscous DR method. To evaluate the numerical efficiency of the proposed method, some 2D and 3D truss and frame structures are analyzed with elastic linear and geometrically nonlinear behaviors. Results show that by using the proposed algorithm for fictitious mass, the convergence rate of the viscous DR method is improved so that the proposed algorithm presents the structural response with lower iterations in comparison with other common DR techniques.

Communicated by Joerg Fehr.     

Copper iodide nanoparticles-decorated porous polysulfonamide gel: As effective catalyst for decarboxylative synthesis of N-Arylsulfonamides

A porous cross-linked poly (ethyleneamine)-polysulfonamide (PEA-PSA) as a novel organic support system is synthesized in the presence of silica template by nanocasting technique. The paper demonstrates immobilization of CuI nanoparticles inside the pores (PEA-PSA@CuI) for the facile recovery and recycling of these nanoparticles. The presence of porous PEA-PSA and PEA-PSA@CuI nanocomposites was confirmed using FT-IR spectroscopy, FE-SEM, EDX, TGA, XRD, TEM, BET, XPS, WDX, ¹H NMR, and ICP-OES techniques. The PEA-PSA@CuI along with Ag(I)/K₂S₂O₈ was implemented as a reusable cooperative catalyst-oxidant system in the N-arylation of p-toluenesulfonamide with substituted carboxylic acids in mild condition. So, the novel decarboxylative cross-coupling catalyzed by copper and silver has been developed. Aromatic, secondary and tertiary aliphatic acids underwent high efficient decarboxylative processes with p-toluenesulfonamide to afford the corresponding products. This method provides a practical approach for the flexible synthesis of sulfonamides from the readily affordable substrates. The catalyst is highly reusable and efficient, especially in terms of time and yield of the desired product.     

Silver chloride supported on Vitamin B1 -Organometallic magnetic catalyst: synthesis,density functional theory study and application in A3-coupling reactions

A highly efficient Fe₃O₄@VitB₁–Ag(I) magnetic catalyst has been obtained using surface modification of Fe₃O₄. To this end, silver chloride was immobilized on Fe₃O₄ nanoparticles via vitamin B₁ biomolecules. The synthesized biocompatible magnetic catalyst was applied in an A³-coupling reaction in the presence of aldehyde, amine and phenyl acetylene under solvent-free conditions and afforded the desired products in excellent yields. Also, interactions between metal and ligand in the Fe₃O₄@VitB₁–Ag(I) were studied using theoretical calculations.     

Comparison of Two Stability-Indicating Chromatographic Methods for the Determination of Mirabegron in Presence of Its Degradation Product

Mirabegron is a novel β₃-adrenoceptor agonist containing an amide group. It was subjected to stress conditions of acidic and alkaline hydrolyses. The hydrolytic degradation product was isolated and its structure was confirmed using mass and IR spectrometry. Two stability-indicating chromatographic methods have been proposed for the determination of mirabegron. TLC method was applied using silica gel as stationary phase and chloroform–methanol–ammonia (9.0:1.0:0.1 by volume) as the mobile phase, and chromatograms were scanned at 250 nm. Accurate determination of the drug was achieved over the concentration range of 2–12 μg per band. In addition, an isocratic HPLC method was developed on Agilent C18 column (150 mm × 4.5 mm I.D., particle size 5 µm) using ethanol-phosphate buffer pH 2.5 (30:70, by volume) as a mobile phase with flow rate of 1 mL min^?1.The intact drug was detected at 250 nm with running time less than 5 min. Mirabegron was determined accurately in a concentration range of 1–25 µg mL^?1. The proposed chromatographic methods were applied successfully for the assay of mirabegron in pharmaceutical dosage form and both methods were validated as per the International Conference on Harmonization guidelines and statistically compared with a reported gradient HPLC method.     

Developing Eco-Friendly and Cost-Effective Porous Adsorbent for Carbon Dioxide Capture

To address the issue of global warming and climate change issues, recent research efforts have highlighted opportunities for capturing and electrochemically converting carbon dioxide (CO₂). Despite metal doped polymers receiving widespread attention in this respect, the structures hitherto reported lack in ease of synthesis with scale up feasibility. In this study, a series of mesoporous metal-doped polymers (MRFs) with tunable metal functionality and hierarchical porosity were successfully synthesized using a one-step copolymerization of resorcinol and formaldehyde with Polyethyleneimine (PEI) under solvothermal conditions. The effect of PEI and metal doping concentrations were observed on physical properties and adsorption results. The results confirmed the role of PEI on the mesoporosity of the polymer networks and high surface area in addition to enhanced CO₂ capture capacity. The resulting Cobalt doped material shows excellent thermal stability and promising CO₂ capture performance, with equilibrium adsorption of 2.3 mmol CO₂/g at 0 °C and 1 bar for at a surface area 675.62 m²/g. This mesoporous polymer, with its ease of synthesis is a promising candidate for promising for CO₂ capture and possible subsequent electrochemical conversion.     

纳米尺度NiLa2O4尖晶石催化NaBH4还原亚胺制仲胺

由溶胶-凝胶法制得的Ni-La化合物经热分解制备了纳米尺度NiLa2O4尖晶石，在750 oC焙烧后形成了结晶良好的尖晶石结构.采用差热分析、X射线衍射、透射电镜、扫描电镜和粒度分布分析等手段表征了该尖晶石的物理化学性质.结果表明，该纳米颗粒有规则的外形和确定的晶面，由平均粒径为40 nm的规整半球晶粒组成.精修的晶胞参数a=3.861205?和c=12.6793?.在NaBH4选择还原亚胺制相应仲胺的反应中，该新型纳米NiLa2O4尖晶石可用作高效多相催化剂，得到了较高的产物产率.所有反应可在室温和相对较短的时间内完成.在优化的反应条件下，均可得到带有不同芳基的，包括带有吸电子和供电子基团的仲胺.该催化剂回收简便，重复使用4次，其催化活性未见明显下降.     

Headspace solid phase microextraction of volatile aromatic hydrocarbons using a steel wire coated with an electrochemically prepared nanocomposite consisting of polypyrrole,carbon nanotubes,and titanium oxide

Microchimica Acta - We have prepared a new material for solid-phase microextraction (SPME) of volatile aromatic hydrocarbons by electropolymerization of pyrrole, carbon nanotubes, and titanium...