Synthesis and Characterization of a Fluorescent Water-Borne Polyurethane Based on a Novel Naphthalimide Dye

A waterborne-polyurethane (WPU) dye, based on the fluorescent dye 4-diamino propane-N-allyl-1,8- naphthalimide (WPU-DAN), was synthesized by attaching 4-diamino propane-N-allyl-1,8- naphthalimide (DAN) onto both ends of the polyurethane (PU) chains according to a prepolymer?ionomer process. The synthetic process was confirmed by Fourier transform infrared spectroscopy (FTIR) and UV-visible absorption. The glass transition temperature, molecular weight and average particle sizes were measured. The glass transition temperatures of WPU and WPU-DAN were 46.6 and 49.8°C, respectively. In addition, the particle size distributions of WPU-DAN and WPU were 140 and 134 nm, respectively. The thermal behaviour of WPU-DAN showed improvement compared to WPU. The fluorescence intensity of WPU-DAN was enhanced more than DAN due to the naphthalimide groups attached to the chains, and the fluorescence intensity of WPU-DAN and DAN were increased by increasing temperature. Moreover, the fluorescence intensity of WPU-DAN emulsion was stable during 30 days and no loss of fluorescence intensity occurred for these days.     

Simultaneous Determination of Ranitidine and Metronidazole at Glassy Carbon Electrode Modified with Single Wall Carbon Nanotubes

Single‐walled carbon nanotubes(SWCNTs) were dispersed into DMSO, and a SWCNTs‐film coated glassy carbon electrode was achieved via evaporating the solvent. The results indicated that CNT modified glassy carbon electrode exhibited efficiently electrocatalytic reduction for ranitidine and metronidazole with relatively high sensitivity, stability and life time. Under conditions of cyclic voltammetry, the potential for reduction of selected analytes is lowered by approximately 150 mV and current is enhanced significantly (7 times) in comparison to the bare glassy carbon electrode. The electrocatalytic behavior is further exploited as a sensitive detection scheme for these analytes determinations by hydrodynamic amperometry. Under optimized condition in amperometric method the concentration calibration range, detection limit and sensitivity were about, 0.1–200 μM, detection limit (S/N=3) 6.3×10^?8 mol L^?1 and sensitivity 40 nA/μM for metronidazole and 0.3–270 μM 7.73×10^?8 mol L^?1 and 25 nA/μM for ranitidine. In addition, the ability of the modified electrode for simultaneous determination of ranitidine and metronidazole was evaluated. The proposed method was successfully applied to ranitidine and metronidazole determination in tablets. The analytical performance of this sensor has been evaluated for detection of these analytes in serum as a real sample.     

The effect of cerium pre-treatment on the corrosion resistance of steel sheets

The steel samples have been coated with cerium layer by cathodic electrolytic deposition from the Ce(NO₃)₃·6H₂O solution in aqueous ethyleneglycol in the presence of hydrogen peroxide. The influence of the coating parameters (cathodic current density, pH, cerium concentration, hydrogen peroxide concentration, temperature, and treatment duration) on the surface properties; the optimum conditions of the formation of corrosion preventing coating have been elucidated. Hydrogen peroxide concentration and pH are the major factors influencing the deposition process. The corrosion resistance has been further enhanced after treatment with Na₃PO₄·12H₂O solution. The cerium-coated samples have been subsequently coated by cathodic electrostatic deposition from the colloidal solution of the paint. The coated materials have been subjected to mechanical testing (hardness, impact, cross cut, bending, and cupping tests), and their structure has been visualized by electron microscopy. The cerium coating has been found to improve the steel corrosion resistance by 15%.     

Electrochemical Determination of Propranolol,Acetaminophen and Folic Acid in Urine,and Human Plasma Using Cu2O–CuO/rGO/CPE

Russian Journal of Electrochemistry - A Cu2O–CuO/rGO/CPE was used for simultaneous measurement of propranolol (PRO), Acetaminophen (AC) and folic acid (FA) using differential pulse...     

Electroless deposition of silver nanofractals on copper wire by galvanic displacement as a simple technique for preparation of porous solid‐phase microextraction fibers

A novel and porous solid‐phase microextraction fiber was prepared by quick and simple galvanic displacement reaction and applied to the determination of some polycyclic aromatic hydrocarbons in sunflower oil. The parameters affecting the porosity and thickness of the fiber, and parameters affecting the extraction efficiency, including the extraction time, temperature, and ionic strength, were investigated and optimized. The morphology of prepared fiber was characterized by optical and scanning electron microscopy and thermal and chemical stabilities of the fiber were studied. Under the optimum conditions, the limits of detection ranged between 0.1 ng/mL for pyrene to 1.2 ng/mL for anthracene, and LOQ ranged between 0.3 ng/mL for pyrene to 3.6 ng/mL for anthracene. The relative standard deviations, including repeatability (within fibers) and reproducibility (between fibers), varied between 3.2–8.9 and 5.6–9.8%, respectively.