STUDIES OF ADHESION OF METAL PARTICLES TO SILICA PARTICLES BASED ON ZETA POTENTIAL MEASUREMENTS

The zeta-potentials of silica, copper, platinum and gold particles have been measured as a function of pH. The isoelectric points were found to be at pH 3.0, 5.8, 3.0 and 3.5, respectively. In the pH range 3.0 to 5.8 copper and silica particles are oppositely charged and accordingly the coating of silica with copper particles could be demonstrated. In the case of gold and platinum the sign of the charge is such that direct adhesion to silica particles cannot be expected and this was also demonstrated in the case of platinum.     

Application of umbelliferone molecularly imprinted polymer in analysis of plant samples

The molecularly imprinted polymers (MIPs) were synthesised and the influence of the type of porogen, the nature of sample solvent, and the binding capacity of material were tested by high-performance liquid chromatography (HPLC). Umbelliferone was used as the template for imprint formation. Methacrylic acid was used as the monomer and acetonitrile, ethanol, and chloroform as porogen. Non-imprinted polymers (NIPs) were prepared by the same procedure. The highest value of the specific binding capacity (269 μg of umbelliferone per 100 mg of polymer) was obtained for polymers prepared in chloroform as porogen and methanol/water (φ _r = 1: 1) as the sample solvent. The group-selective MIP was used as sorbent for the SPE pre-treatment of umbelliferone from plant extracts prior to HPLC analysis. Analysis of the spiked samples showed good recoveries (> 77 %). The limit of detection, limit of determination, and repeatability of the method were also calculated.     

<Emphasis Type="Italic">N</Emphasis>-arachidonoyl glycine,an abundant endogenous lipid,potently drives directed cellular migration through GPR18, the putative abnormal cannabidiol receptor

Background  

Microglia provide continuous immune surveillance of the CNS and upon activation rapidly change phenotype to express receptors that respond to chemoattractants during CNS damage or infection. These activated microglia undergo directed migration towards affected tissue. Importantly, the molecular species of chemoattractant encountered determines if microglia respond with pro- or anti-inflammatory behaviour, yet the signaling molecules that trigger migration remain poorly understood. The endogenous cannabinoid system regulates microglial migration via CB₂ receptors and an as yet unidentified GPCR termed the 'abnormal cannabidiol' (Abn-CBD) receptor. Abn-CBD is a synthetic isomer of the phytocannabinoid cannabidiol (CBD) and is inactive at CB₁ or CB₂ receptors, but functions as a selective agonist at this G_i/o-coupled GPCR. N-arachidonoyl glycine (NAGly) is an endogenous metabolite of the endocannabinoid anandamide and acts as an efficacious agonist at GPR18. Here, we investigate the relationship between NAGly, Abn-CBD, the unidentified 'Abn-CBD' receptor, GPR18, and BV-2 microglial migration.     

Evaluation of automated direct sample introduction with comprehensive two-dimensional gas chromatography/time-of-flight mass spectrometry for the screening analysis of dioxins in fish oil

An automated direct sample introduction technique coupled to comprehensive two-dimensional gas chromatography-time of flight mass spectrometry (DSI-GC x GC/TOF-MS) was applied for the development of a relatively fast and easy analytical screening method for 17 polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) and 4 non-ortho polychlorinated biphenyls (PCBs) in fish oil. Comparison of instrumental performance between DSI-GC x GC/TOF-MS and the traditional gas chromatographic high resolution mass spectrometric (GC-HRMS) method showed good agreement of results for standard solutions analyzed in blind fashion. Relatively high tolerance of the DSI technique for lipids in the final extracts enabled a streamlined sample preparation procedure that only required gel permeation chromatography (GPC) and solid-phase extraction (SPE) cleanup with graphitized carbon black. The sample size for the method was 2g of cod liver oil, which achieved limits of quantitation (LOQs) of 0.019-7.8 pg/g toxic equivalent quotients for the individual PCDD/Fs. Lower detection limits can be achieved by using larger sample size and scaling up the sample preparation procedure, but this adds to the labor, time, solvent consumption, and expense of the approach. However, the streamlined method yielded 0.94 pg/g and 2.3 pg/g LOQs for 2,3,7,8-tetrachloro dibenzofuran (TCDF) and 3,3',4,4',5-pentachloro biphenyl (CB126), which were sufficiently low for regulatory monitoring of 2g samples. Therefore, instead of congener specific analysis, this streamlined analytical screening method for TCDF and CB126 has the potential to monitor fish oil contaminated with dioxin and dioxin-like PCBs at or above current food safety limits. Acceptable recoveries for nearly all analytes at three different spiking levels in fish oil samples were achieved with good repeatability.     

Development and validation of a rapid method for microcystins in fish and comparing LC-MS/MS results with ELISA

Microcystins (MCs) are the most common cyanotoxins found worldwide in freshwater, brackish, and marine environments. The rapid and accurate analysis of MCs and nodularin (Nod-R) in fish tissue is important for determining occurrence, following trends, and monitoring exposure for risk assessment and other purposes. The aim of this study was to develop a streamlined and reliable sample preparation method for eight MCs (MC-RR, MC-YR, MC-LR, MC-WR, MC-LA, MC-LY, MC-LW, and MC-LF) and Nod-R in fish, and conduct a validation of the new method using liquid chromatography–tandem mass spectrometry (LC-MS/MS) for analysis and compare the results with a commercial enzyme-linked immunosorbent assay (ELISA) kit. Different sample preparation methods were compared, and a simple extraction protocol with acidified acetonitrile/water (3:1) followed by hexane partitioning cleanup was found to be most effective. Thorough validation of the final method was conducted, and 90–115% recoveries were achieved for all analytes except for MC-RR, which gave 130% average recovery (isotopically labeled internal standards were unavailable to correct for possible biases). The use of electrospray ionization in the negative mode gave few interferences and minimal matrix effects in the LC-MS/MS analysis overall. Precision was typically 10–20% RSD among multiple days in experiments, detection limits were <10 ng/g in the fish tissue (catfish, basa, and swai filets), and no false-positives or false-negatives occurred in blind analyses of many spiked samples. The ELISA was unable to distinguish between MCs but was found to correctly assess the presence or absence of MCs and Nod-R in the blind-fortified fish tissues. The capability of these approaches to measure covalently bound MCs was not assessed.     

Determination of dissolved sulphides in waste water samples by flow-through stripping chronopotentiometry with a macroporous mercury-film electrode

Sulphides in water samples were determined by stripping chronopotentiometry in a computer controlled flow system with a flow-through electrochemical cell. The working electrode was a porous glassy carbon electrode coated with Nafion and mercury. The sample was diluted with 0.1 mol L⁻¹ NaOH and analysed. Sulphides in the sample were collected in the porous electrode as mercury sulphide and then stripped by a current of −500 μA. The limit of detection was found to be 1.6 μg L⁻¹ and 0.5 μg L⁻¹ for 1 mL and 5 mL of preconcentrated sample, respectively. The linear range for 1 mL sample was found to be 5-400 μg L⁻¹. The repeatability and reproducibility was found to be 2.6% and 4.8%, respectively. The method was applied to analyses of waste water samples from a tannery.     

Analysis of pesticide residues in mixed fruit and vegetable extracts by direct sample introduction/gas chromatography/tandem mass spectrometry

Direct sample introduction (DSI), or "dirty sample injection," was investigated in the determination of 22 diverse pesticide residues in mixed apple, green bean, and carrot extracts by benchtop gas chromatography/tandem mass spectrometry (DSI/GC/MS-MS). The targeted pesticides, some of which were incurred in the samples, included chlorpyrifos, azinphos-methyl, parathion-methyl, diazinon, terbufos, p,p'-DDE, endosulfan sulfate, carbofuran, carbaryl, propargite, bifenthrin, dacthal, trifluralin, metalaxyl, pendimethalin, atrazine, piperonyl butoxide, diphenylamine, vinclozolin, chlorothalonil, quintozene, and tetrahydrophthalimide (the breakdown product of captan). The analytical DSI method entailed the following steps: (1) blend 30 g sample with 60 mL acetonitrile for 1 min in a centrifuge bottle; (2) add 6 g NaCl and blend 30 s; (3) centrifuge for 1-2 min; (4) add 5 mL upper layer to 1 g anhydrous MgSO4 in a vial; and (5) analyze 11 microL extract, using DSI/GC/MS-MS. Sample cleanup is not needed because GCIMS-MS is exceptionally selective for the targeted analytes, and nonvolatile coextracted matrix components do not contaminate the injector or the GC/MS-MS system. Average recoveries of the pesticides were 103 +/- 7% with relative standard deviations of 14 +/- 5% on average, and limits of detection were <2 ng/g for nearly all pesticides studied. The DSI/GC/ MS-MS approach for targeted pesticides is quantitative, confirmatory, sensitive, selective, rugged, rapid, simple, and inexpensive.     

Determination of the interconversion energy barrier of 2,3-pentadienedioic acid enantiomers by HPLC. 2. On-column interconversion

In this paper, an HPLC method is used to determine the enantiomerization barrier of 2,3-pentadienedioic acid enantiomers. The racemate of 2,3-pentadienedioic acid was separated by HPLC on a chiral CHIROBIOTIC T column with a 90:10 (100:0.5:0.5 MeOH/HOAc/TEA)/H2O mobile phase. Peak areas of enantiomers prior to (A(+)0, A(-)0) and after the separation (A(+), A(-)), were used for calculation of the rate constants and the enantiomerization barrier, as determined by computer-assisted peak deconvolution of the peak clusters on the chromatograms. The kinetic equation for irreversible reactions was used to determine the apparent enantiomerization rate constants and the interconversion energy barrier. The dependence of the apparent enantiomerization barrier (deltaG1(app), deltaG-1(app)) on temperature was used to determine the apparent activation enthalpy (deltaH1(app), deltaH(-1)app) and entropy (deltaS1(app), deltaS-1(app)) for the interconversion of 2,3-pentadienedioic acid enantiomers, where the coefficients 1 and -1 designate the interconversions (+) --> (-) and (-) --> (+), respectively.     

Fast and easy multiresidue method employing acetonitrile extraction/partitioning and "dispersive solid-phase extraction" for the determination of pesticide residues in produce

A simple, fast, and inexpensive method for the determination of pesticide residues in fruits and vegetables is introduced. The procedure involves initial single-phase extraction of 10 g sample with 10 mL acetonitrile, followed by liquid-liquid partitioning formed by addition of 4 g anhydrous MgSO4 plus 1 g NaCl. Removal of residual water and cleanup are performed simultaneously by using a rapid procedure called dispersive solid-phase extraction (dispersive-SPE), in which 150 mg anhydrous MgSO4 and 25 mg primary secondary amine (PSA) sorbent are simply mixed with 1 mL acetonitrile extract. The dispersive-SPE with PSA effectively removes many polar matrix components, such as organic acids, certain polar pigments, and sugars, to some extent from the food extracts. Gas chromatography/mass spectrometry (GC/MS) is then used for quantitative and confirmatory analysis of GC-amenable pesticides. Recoveries between 85 and 101% (mostly > 95%) and repeatabilities typically < 5% have been achieved for a wide range of fortified pesticides, including very polar and basic compounds such as methamidophos, acephate, omethoate, imazalil, and thiabendazole. Using this method, a single chemist can prepare a batch of 6 previously chopped samples in < 30 min with approximately 1 dollar (U.S.) of materials per sample.     

Europium-sensitized luminescence determination of oxytetracycline in catfish muscle

An europium-sensitized time-resolved luminescence (TRL) method was developed to determine oxytetracycline (OTC) in cultivated catfish muscle. Extraction of OTC from fish muscle was performed with pH 4.0 ethylenediaminetetraacetic acid (EDTA)-McIlvaine buffer and clean up with hydrophilic-lipophilic balanced copolymer solid phase extraction (SPE) cartridges. The eluate was used without further concentration for TRL measurement in pH 9.0 micellar tris(hydroxylmethyl)aminomethane (TRIS) buffer. Cetyltrimethylammonium chloride (CTACl) was used as surfactant and EDTA as a co-ligand. The excitation and emission wavelengths were set at 388 and 615 nm, respectively. The linear dynamic range was 0-1000 ng g⁻¹ (R²=0.9995). The recovery was 92-112% in the fortification range of 50-200 ng g⁻¹ and the limits of detection (LOD) ranged from 3 to 7 ng g⁻¹. Incurred catfish samples were used to demonstrate the performance of the method around 100 ng g⁻¹, the European Union maximum residue level.