A facile and green synthetic approach toward fabrication of starch-stabilized magnetite nanoparticles

A facile and green synthetic approach for fabrication of starch-stabilized magnetite nanoparticles was implemented at moderate temperature. This synthesis involved the use of iron salts, potato starch,sodium hydroxide and deionized water as iron precursors, stabilizer, reducing agent and solvent respectively. The nanoparticles(NPs) were characterized by UV-vis, PXRD, HR-TEM, FESEM, EDX, VSM and FT-IR spectroscopy. The ultrasonic assisted co-precipitation technique provides well formation of highly distributed starch/Fe_3O_4-NPs. Based on UV–vis analysis, the sample showed the characteristic of surface plasmon resonance in the presence of Fe_3O_4-NPs. The PXRD pattern depicted the characteristic of the cubic lattice structure of Fe_3O_4-NPs. HR-TEM analysis showed the good dispersion of NPs with a mean diameter and standard deviation of 10.68 4.207 nm. The d spacing measured from the lattice images were found to be around 0.30 nm and 0.52 nm attributed to the Fe3O4 and starch, respectively. FESEM analysis confirmed the formation of spherical starch/Fe_3O_4-NPs with the emission of elements of C, O and Fe by EDX analysis. The magnetic properties illustrated by VSM analysis indicated that the as synthesized sample has a saturation magnetization and coercivity of 5.30 emu/g and 22.898 G respectively.Additionally, the FTIR analysis confirmed the binding of starch with Fe_3O_4-NPs. This method was cost effective, facile and eco-friendly alternative for preparation of NPs.     

ACQ-to-AIE Transformation: Tuning Molecular Packing by Regioisomerization for Two-Photon NIR Bioimaging

The traditional design strategies for highly bright solid-state luminescent materials rely on weakening the intermolecular π–π interactions, which may limit diversity when developing new materials. Herein, we propose a strategy of tuning the molecular packing mode by regioisomerization to regulate the solid-state fluorescence. TBP-e-TPA with a molecular rotor in the end position of a planar core adopts a long-range cofacial packing mode, which in the solid state is almost non-emissive. By shifting molecular rotors to the bay position, the resultant TBP-b-TPA possesses a discrete cross packing mode, giving a quantum yield of 15.6±0.2 %. These results demonstrate the relationship between the solid-state fluorescence efficiency and the molecule's packing mode. Thanks to the good photophysical properties, TBP-b-TPA nanoparticles were used for two-photon deep brain imaging. This molecular design philosophy provides a new way of designing highly bright solid-state fluorophores.     

Development and validation of a multiplex real-time PCR method to simultaneously detect 47 targets for the identification of genetically modified organisms

Considering the increase of the total cultivated land area dedicated to genetically modified organisms (GMO), the consumers’ perception toward GMO and the need to comply with various local GMO legislations, efficient and accurate analytical methods are needed for their detection and identification. Considered as the gold standard for GMO analysis, the real-time polymerase chain reaction (RTi-PCR) technology was optimised to produce a high-throughput GMO screening method. Based on simultaneous 24 multiplex RTi-PCR running on a ready-to-use 384-well plate, this new procedure allows the detection and identification of 47 targets on seven samples in duplicate. To comply with GMO analytical quality requirements, a negative and a positive control were analysed in parallel. In addition, an internal positive control was also included in each reaction well for the detection of potential PCR inhibition. Tested on non-GM materials, on different GM events and on proficiency test samples, the method offered high specificity and sensitivity with an absolute limit of detection between 1 and 16 copies depending on the target. Easy to use, fast and cost efficient, this multiplex approach fits the purpose of GMO testing laboratories.

Silk‐Pectin Hydrogel with Superior Mechanical Properties,Biodegradability, and Biocompatibility

A new method is developed to prepare silk hydrogels and silk‐pectin hydrogels via dialysis against methanol to obtain hydrogels with high concentrations of silk fibroin. The relationship between the mechanical and biological properties and the structure of the silk‐pectin hydrogels is subsequently evaluated. The present results suggest that pectin associates with silk molecules when the silk concentration exceeds 15 wt%, suggesting that a silk concentration of over 15 wt% is critical to construct interacting silk‐pectin networks. The silk‐pectin hydrogel reported here is composed of a heterogeneous network, which is different from fiber‐reinforced, interpenetrated networks and double‐network hydrogels, as well as high‐stiffness hydrogels (elastic modulus of 4.7 ± 0.9 MPa, elastic stress limit of 3.9 ± 0.1 MPa, and elastic strain limit of 48.4 ± 0.5%) with regard to biocompatibility and biodegradability.     

A thermal analysis evaluation of the low temperature synthesis of BaBiO3

Thermal decomposition of metal-organic precursors for the mixed oxide BaBiO₃ was studied using TG and EGA. Precursors produced by polyesterification of bifunctional acids with ethylene glycol (Pechini process) decomposed about 100°C higher than those without the diol. BaCO₃ was identified by IR and XRD as a reaction intermediate. EGA proved that the amount of BaCO₃ was below 10% of the total barium, and that the barium exists mainly as a nitro-compound up to 650°C. Phase-pure BaBiO₃ with a moderately high surface area (1.4 m²/g) could be synthesised from a citrate precursor by the Pechini process at around 850°C.     

Solid-state extrusion of chain-extended polyethylene

Billets of chain-extended polyethylene were prepared from Alathon 7050 (M_w 59,000, M_n 19,000) in an Instron capillary rheometer by crystallization at a constant pressure of 460 MPa, at a series of teimperatures from 198 to 221°C corresponding to varying degrees of undercooling. This gives chain-extended morphologies with a range of crystallinites and lamellar thicknesses. The billets were then solid-state extruded at 100°C through a conical die with 20° entrance angle up to an extrusion draw ration 23.4. Thermal behavior was studied with differential scanning calorimetry. The orientation function measured by wide-angle x-ray diffraction showed higher orientation function measured by wide-angle x-ray diffraction showed higher orientation at equivalent draw ratio when the initial billets were crystallized at lower temperatures. Drawing efficiency, defined as the ratio of molecular draw ratio (from shrinkage) to extrusion draw ratio correspondingly increases, reaching a maximum of 0.71 in our solid-state extrusion. These studies show that highly chain-extended polyethylene, i.e., with few chain entanglements, draws poorly. Drawability was improved by increasing chain entanglements by lowering the crystallization temperature. Electron micrographs of fracture surface replicas of extrudates revealed the coexistence of undeformed, tilted, partially drawn lamellae and fibrillar structure consistent with the cahange of morphologies in Peterlin's model of plastic deformation.     

Optical band gap and conductivity measurements of polypyrrole-chitosan composite thin films

Electrical conductivity and optical properties of polypyrrole-chitosan（PPy-CHI） conducting polymer composites have been investigated to determine the optical transition characteristics and energy band gap of composite films.The two electrode method and I-V characteristic technique were used to measure the conductivity of the PPy-CHI thin films,and the optical band gap was obtained from their ultraviolet absorption edges.Depending upon experimental parameter,the optical band gap（E_g） was found within 1.30-2.32 eV as estimated from optical absorption data.The band gap of the composite films decreased as the CHI content increased.The room temperature electrical conductivity of PPy-CHI thin films was found in the range of 5.84×10^-7-15.25×10^-7 S·cm^-1 depending on the chitosan content.The thermogravimetry analysis（TGA） showed that the CHI can improve the thermal stability of PPy-CHI composite films.     

Al-free Zr-zeolite beta as a regioselective catalyst in the Meerwein-Ponndorf-Verley reaction

Al-free Zr-zeolite beta catalyzes the transfer reduction of ketones to the corresponding alcohols in high yield and with exceptional stereocontrol. Notably, the catalyst is very robust and gives good results even with 10% water content in the reaction mixture.