Control of chain ends of polyesters in polycondensation of AA and BB monomers by use of solid‐phase reagent

For selective synthesis of linear polyester having a functional group at one end, polycondensation between 1,4‐butanediol ( 1a ) and sebacoyl chloride ( 2a ) and between 1,12‐dodecanediol ( 1b ) and isophthaloyl chloride ( 2b ) was conducted in the presence of oxime resin or oxime silica gel, followed by cleavage of the formed polyester from the solid‐phase support with aniline. Matrix‐assisted laser desorption ionization time‐of‐flight mass spectra and ¹H NMR spectra of the cleaved polyester showed that the products contained not only polyester with anilide at one end ( poly 1 ), but also polyester with anilides at both ends ( poly 2 ). The product ratio of poly 1 to poly 2 ( poly 1 / poly 2 ) was dependent on monomers, monomer concentration, feed ratio of monomer to oxime moiety in the support, oxime content in the support, reaction solvent, and the nature of the support. Polyester with a high poly 1 / poly 2 ratio of 81/21 and moderate molecular weight (M_n = 1430 g/mol) was obtained by polycondensation of 1b and 2b in the presence of oxime silica gel in dichloromethane. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1379–1386     

Formation of Supramolecular Nanostructures through in Situ Self-Assembly and Post-Assembly Modification of a Biocatalytically Constructed Dipeptide Hydrazide**

Aqueous self-assembly of short peptides has attracted growing attention for the construction of supramolecular materials for various bioapplications. Herein, we describe how the thermolysin-assisted biocatalytic construction of a dipeptide hydrazide from an N-protected amino acid and an amino acid hydrazide leads to the formation of thermally stable supramolecular hydrogels. In addition, we demonstrate the post-assembly modification of the supramolecular architectures constructed in situ tethering hydrazide groups as a chemical handle by means of fluorescence imaging.     

Change in motor cortex activation for muscle release by motor learning

For central nervous system disorders'' rehabilitation, it is important to accurately understand motor control and implement an appropriate motor learning process to induce neuroplastic changes. The neurophysiological studies have revealed that neural control mechanisms are crucial during both the onset of muscular activities and muscle release after contraction. When performing various movements during daily activities, muscle relaxation control enables precise force output and timing control. Moreover, surround inhibition is a functional mechanism in the motor system. Surround inhibition of the motor system may be involved in the selective execution of desired movements. This review demonstrates cortical excitability resulting from motor learning, movement control mechanisms including muscle relaxation and the suppression of nontarget muscle groups, and the voluntary drive''s importance that is required for movement.     

Optimizing Charge Switching in Membrane Lytic Peptides for Endosomal Release of Biomacromolecules

Endocytic pathways are practical routes for the intracellular delivery of biomacromolecules. Along with this, effective strategies for endosomal cargo release into the cytosol are desired to achieve successful delivery. Focusing on compositional differences between the cell and endosomal membranes and the pH decrease within endosomes, we designed the lipid-sensitive and pH-responsive endosome-lytic peptide HAad. This peptide contains aminoadipic acid (Aad) residues, which serve as a safety catch for preferential permeabilization of endosomal membranes over cell membranes, and His-to-Ala substitutions enhance the endosomolytic activity. The ability of HAad to destabilize endosomal membranes was supported by model studies using large unilamellar vesicles (LUVs) and by increased intracellular delivery of biomacromolecules (including antibodies) into live cells. Cerebral ventricle injection of Cre recombinase with HAad led to Cre/loxP recombination in a mouse model, thus demonstrating potential applicability of HAad in vivo.     

Spectral Mismatch Effect of Ultraviolet Radiometers in Actual UV-C Measurement

The management of radiant exposure to ultraviolet (UV) radiation, especially in the wavelength range from 100 nm to 280 nm (i.e. UV-C), is important for virus inactivation or photobiological safety. Recently, many commercial UV radiometers have been used to measure UV-C irradiance for industrial and public applications. The accuracy of the four types of commercial UV radiometers was investigated by comparing the reference irradiance values obtained from the spectral irradiance standard. It was found that the displayed values of the UV radiometers have discrepancies, such that the measured value can be more than twice the actual value in a certain case. The spectral mismatch between the calibration and test sources is a major factor in the discrepancies in the UV-C measurements. With spectral mismatch correction, most corrected values show a tendency to improve the result to approaching the reference values within 20%. Users need to provide spectral information about the source and radiometer used for UV-C measurement.     

All-Solid-State Rechargeable Air Batteries Using Dihydroxybenzoquinone and Its Polymer as the Negative Electrode

A proof-of-concept study was conducted on an all-solid-state rechargeable air battery (SSAB) using redox-active 2,5-dihydroxy-1,4-benzoquinone (DHBQ) and its polymer (PDBM) and a proton-conductive polymer (Nafion). DHBQ functioned well in the redox reaction with the solid Nafion ionomer at 0.47 and 0.57 V vs. RHE, similar to that in acid aqueous solution. The resulting air battery exhibited an open circuit voltage of 0.80 V and a discharge capacity of 29.7 mAh g_DHBQ⁻¹ at a constant current density (1 mA cm⁻²). With PDBM, the discharge capacity was much higher, 176.1 mAh g_PDBM⁻¹, because of the improved utilization of the redox-active moieties. In the rate characteristics of the SSAB-PDBM, the coulombic efficiency was 84 % at 4 C, which decreased to 66 % at 101 C. In a charge/discharge cycle test, the capacity remaining after 30 cycles was 44 %, which was able to be significantly improved, to 78 %, by tuning the Nafion composition in the negative electrode.     

Carbazole Dendrimers as Solution‐Processable Thermally Activated Delayed‐Fluorescence Materials

Recently, thermally activated delayed fluorescence (TADF) materials have received increasing attention as effective emitters for organic light‐emitting diodes (OLEDs). However, most of them are usually employed as dopants in a host material. In this report, carbazole dendrimers with a triphenyl‐s‐triazine core are reported, which are the first solution‐processable, non‐doped, high‐molecular‐weight TADF materials. The dendrimers were obtained by a new and facile synthetic route using the tert‐butyldimethylsilyl moiety as a protecting group. All dendrimers showed TADF in toluene. Measurements of the temperature‐dependent luminescence lifetime revealed that spin‐coated neat films also showed TADF with moderate quantum yields. OLED devices incorporating these dendrimers as spin‐coated emitting layers gave external quantum efficiencies of up to a 3.4 %, which suggests that this device is harvesting triplet excitons. This result indicates that carbazole dendrimers with attached acceptors are potential TADF materials owing to their polarized electronic structure (with HOMO–LUMO separation).     

Caesaljaponins A and B: New Cassane‐Type Furanoditerpenoids from the Seeds of Caesalpinia decapetala var. japonica

Two new cassane‐type furanoditerpenoids, designated caesaljaponin A and caesaljaponin B ( 1 and 2 , resp.), were isolated from seeds of Caesalpinia decapetala var. japonica. The structures were elucidated by spectroscopic data, and the absolute configuration of 1 was determined by X‐ray crystallographic analysis using the anomalous scattering of CuK_α radiation.