Self‐assembled polyurea macromer nanodispersion and resulting hybrid polyurea‐acrylic emulsions and films

A polyurea macromer (PUM) was synthesized and dispersed in basic conditions to form self‐assembled nanoparticles (<20 nm dispersions, up to 30 wt % aq. soln.). These nanoparticles enabled surfactant‐free emulsion polymerization to form hybrid polyurea‐acrylic particles despite the absence of a measureable water‐soluble fraction. The T_g of the starting PUM material was a strong function of the PUM's extent of neutralization and hydration (varying between 100 °C and >175 °C) due to changes in hydrogen and ionic bonding. Two separate hybrid polyurea‐acrylic emulsion systems were prepared: one by direct polymerization of (meth)acrylic monomers in the presence of the nanodispersion and a second by a physical blend of PUM nanodispersion with an acrylic latex control. The direct polymerization method resulted in a hybrid emulsion particle size that developed by a mechanism resembling conventional emulsion polymerization and was unlike that described for seeded polyurethane dispersion systems. Film hardness was shown to increase with increasing coating thickness for the hybrid film prepared by direct polymerization. The resulting mechanical properties could be explained by applying mechanical models for a composite foam structure. These results were unprecedented for normal elastomer films. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1373–1388     

Synthesis and characterization of structural and luminescence properties of blue — green BaAlxOy:Eu2+ phosphor by solution — combustion method

Europium-doped barium aluminate (BaAl _x O _y :Eu²⁺) phosphors were obtained at low temperatures (500°C) using the solution — combustion of corresponding metal nitrate-urea solution mixtures. The particle size and morphology and the structural and luminescent properties of the synthesized phosphors were examined by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), Electron diffraction spectroscopy (EDS) and photoluminescence (PL). It was found that the change in Ba: Al molar ratios showed greatly influence not only on the particle size and morphology, but also on their PL spectra and crystalline structure. The structure of BaAl _x O _y nanophosphors changes from a hexagonal Ba₂Al₁₀O₁₇ phase for samples with 6:100 molar ratios to a hexagonal BaAl₂O₄ one with an increase in Ba content. The peak of the emission band occurs at a longer wavelength (around 615 nm) with a decrease in Ba concentration but displays a broad blue-green emission band composed from two emissions with the maximum at 495 and 530nm coming from Eu²⁺ in two sites for increasing Ba content. The blue-green emission is probably due to the influence of 5d electron states of Eu²⁺ in the crystal field because of atomic size variation causing crystal defects while the red emission is due to f - f transitions. These findings clearly demonstrate the possibility of fine tuning the colour emission.     

Crystalline bismuth oxide nanorods fabricated on Pt‐coated substrates using a trimethylbismuth and oxygen mixture

The current work reports the fabrication of crystalline Bi₂O₃ nanorods on Pt‐coated Si substrates using trimethylbismuth and O₂ as the bismuth and the oxygen sources, respectively, in the metalorganic chemical vapor deposition process. Their microstructures were characterized by scanning electron microscopy, X‐ray diffraction, and transmission electron microscopy. The obtained nanorods were crystalline, with their diameters in the range of 20–200 nm. The absence of tip‐nanoparticle and the presence of predeposited Bi₂O₃ layer indicated that the growth was dominated by a vapor‐solid process. The photoluminescence measurements of the Bi₂O₃ nanorods at room temperature exhibited an emission band peaked at around 422 nm. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Fabrication and annealing effects of SnO2/SiOx nanocables sheathed by the sputtering technique

We reported an approach, in which we have produced the nano-sized crystalline tin oxide (SnO₂) particles with rutile structure. SnO₂ nanowires were coated with a shell layer of SiO_x via a sputtering method. Transmission electron microscopy and elemental mapping investigations revealed that the nanostructures consisted of a crystalline SnO₂ core surrounded by an amorphous SiO_x sheath. The annealing effects on the core-shell nanowires were investigated, revealing that the outer surface became rougher by the thermal annealing. For core-shell nanowires, a room-temperature PL measurement with a Gaussian fitting showed yellow, blue, and violet light emission bands, with the relative intensity of the yellow band showing an increase after thermal annealing. Possible PL emission mechanisms are discussed. This study reveals that the sputtering is effective for preparing the shell layers of nanocables.     

Characterization of PDMS model junctions and networks by solution and solid-state silicon-29 NMR spectroscopy

The application of ²⁹Si solution and solid-state cross-polarization/magic-angle spinning (CP/MAS) nuclear magnetic resonance (NMR) techniques to the study of structural features in polydimethylsiloxane (PDMS) model endlinked elastomeric networks is explored. The relationship between the topological (network) functionality of a structural moiety, which determines network mechanical properties, and its chemical (spectral) functionality, which is reported by the NMR, is discussed. The second-order spectral shifts corresponding to topographical functionality variation within a chemical functionality class are usually sufficiently well resolved in these networks to allow positive identification of a variety of structural features. The basic PDMS repeat unit, ? OSi(CH₃)₂? , is found to possess an axially symmetric chemical shift tensor with σ_∥ = ?56.8 ppm downfield from TMS, and σ_⊥ = ?4.4 ppm. This axial symmetry does not result from rapid reorientation about the chain axis. The NMR spectrum reveals defects in model endlinked networks. In the case of vinyl-endlinked systems, the defects are ascribed to the formation of elastically ineffective loops. Hydroxyl-endlinked systems contain either loops or else trifunctional junctions (hydrolyzed before chain coupling could take place) and dangling chain ends. The CP/MAS technique provides an order-of-magnitude reduction over standard solution techniques in the time to acquire a spectrum from a network not containing paramagnetic doping. ¹³C spectra of PDMS systems are not as informative as ²⁹Si spectra.