Evaluation of Redox Activity of Human Myocardium‐derived Mesenchymal Stem Cells by Scanning Electrochemical Microscopy

In this study the redox activity of human myocardium‐derived mesenchymal stem cells (hmMSC) were investigated by redox‐competition (RC‐SECM) and generation‐collection (GC‐SECM) modes of scanning electrochemical microscopy (SECM), using 2‐methylnaphthalene‐1,4‐dione (menadione, MD) as a redox mediator. The redox activity of human healthy and dilated hmMSCs was evaluated by measuring reduction of MD. Measurements were performed by approaching and retracting the UME from the surface of growing hmMSC cells. The current study shows that the RC‐SECM mode can be applied to investigate integrity of cell membranes, whereas the most promising results were observed by using the GC‐SECM mode and applying the Hill's equation for the calculation/fitting of dependencies of electrical current vs menadione concentration. The calculated apparent Michaelis constant (K_M) for the production of menadiol (MDH₂) in the pathological hmMSC cells was 14.4 folds higher compared to that of the healthy hmMSC revealing the lover redox activity of pathological cells. Moreover, the calculated Hill's coefficient n shows a negative cooperative binding between MD and healthy hmMSC and positive cooperative binding between MD and pathological hmMSC. It means that healthy hmMSC is of lower affinity to MD, which is also related to the better membrane integrity of healthy cells. Data of this study demonstrate that SECM can be applied to investigate intracellular redox and membrane changes ongoing in human dilated myocardium‐derived hmMSC in order to improve their functioning and further regenerative potential.     

Synthesis and properties of methoxyphenyl-substituted derivatives of indolo[3,2-b]carbazole

The synthesis and full characterization of new derivatives of indolo[3,2-b]carbazole with differently substituted phenyl groups at nitrogen atoms is reported. Comparative study on their thermal, optical electrochemical, and photoelectrical properties is presented. The synthesized compounds are electrochemically stable. Their highest occupied molecular orbital energy values range from -5.14 to -5.07 eV. The electron photoemission spectra of the films of synthesized materials revealed the ionization potentials of 5.31-5.47 eV. Hole drift mobility of the amorphous film of 5,11-bis(3-methoxyphenyl)-6-pentyl-5,11-dihydroindolo[3,2-b]carbazole exceed 10(-3) cm(2)/V·s at high electric fields, as it was established by xerographic time-of-flight technique. In contrast to diphenylamino substituted derivatives of carbazole, no effect of the position of methoxy groups on the photoelectrical properties was observed for the synthesized methoxyphenyl-substituted derivatives of indolo[3,2-b]carbazole. The indolo[3,2-b]carbazole core has a larger resonance structure that includes 3 phenyl rings, and thus the energy gap of the HOMO and LUMO π orbitals is lower as compared to that of carbazoles. With a larger energy difference between the phenyl substituents and the core moiety, the indolo[3,2-b]carbazole derivatives studied all have a weaker coupling between the phenyl group and a much weaker dependence of the molecular properties on the position of substituents on the phenyl groups as compared to those observed in substituted carbazoles.     

Triplet harvesting in poly(9‐vinylcarbazole) and poly(9‐(2,3‐epoxypropyl)carbazole) doped with CdSe/ZnS quantum dots encapsulated with 16‐(N‐carbazolyl) hexadecanoic acid ligands

Semiconductor quantum dots (QDs) can be used as alternative for transition metal complexes to harvest the nonemissive triplet excitons in organic light‐emitting diodes (OLEDs). In search for a QD‐based OLED material generating blue emission, poly(9‐vinylcarbazole) (PVK) and poly(9‐(2,3‐epoxypropyl) carbazole) (PEPK) are chosen as host for blue‐emitting CdSe/ZnS core/shell QDs. The QDs are encapsulated with 16‐(N‐carbazolyl) hexadecanoic acid (C16), a ligand terminated by a carbazole moiety. As alternative for PVK, PEPK, where the lower molecular weight and less extensive excimer formation could promise a better film formation and more extensive exciton hopping, is explored. The efficiencies of singlet ( ) and triplet ( ) energy transfer to the C16 capped QDs are estimated by combining stationary photoluminescence spectra and fluorescence decays of pristine polymer films with those of polymer films doped with the QDs. At a loading of 30 wt % of the QDs, increases from 12 ± 1% in PVK to 41 ± 2% in PEPK while increases from 37 ± 22% in PVK to 72 ± 48% in PEPK. The investigation of the film morphology by atomic force microscopy confirms that the main factor limiting the triplet transfer efficiency in the PVK matrix is the clustering of the C16 capped QDs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 539–551     

Combination of neural networks and DFT calculations for the comprehensive analysis of FDMPO radical adducts from fast isotropic electron spin resonance spectra

The 4-hydroxy-5,5-dimethyl-2-trifluoromethylpyrroline-1-oxide (FDMPO) spin trap is very attractive for spin trapping studies due to its high stability and high reaction rates with various free radicals. However, the identification of FDMPO radical adducts is a challenging task since they have very comparable Electron Spin Resonance (ESR) spectra. Here we propose a new method for the analysis and interpretation of the ESR spectra of FDMPO radical adducts. Thus, overlapping ESR spectra were analyzed using computer simulations. As a result, the N- and F-hyperfine splitting constants were obtained. Furthermore, an artificial neural network (ANN) was adopted to identify radical adducts formed during various processes (e.g., Fenton reaction, cleavage of peracetic acid over MnO(2), etc.). The ANN was effective on both "known" FDMPO radical adducts measured in slightly different solvents and not a priori "known" FDMPO radical adducts. Finally, the N- and F-hyperfine splitting constants of ·OH, ·CH(3), ·CH(2)OH, and CH(3)(C═O)O(·) radical adducts of FDMPO were calculated using density functional theory (DFT) at the B3LYP/6-31G(d,p)//B3LYP/6-31G++//B3LYP/EPR-II level of theory to confirm the experimental data.     

Star-Shaped Poly((9-carbazolyl)methylthiirane): A New Polymer for Optoelectronic Applications

Summary: The polymerization of (9-carbazolyl)methylthiirane in the presence of cyclic oligo(potassium glycidoxide) as the macroinitiator activated 18-crown-6 leads to polythioether with the molecular masses relatively near to the calculated ones. This polythioether dispersed in a commercially available transparent polymer gives a new blue photoluminescent material.     

Delta13C and delta18O isotopic composition of CaCO3 measured by continuous flow isotope ratio mass spectrometry: statistical evaluation and verification by application to Devils Hole core DH-11 calcite

A new method was developed to analyze the stable carbon and oxygen isotope ratios of small samples (400 +/- 20 micro g) of calcium carbonate. This new method streamlines the classical phosphoric acid/calcium carbonate (H(3)PO(4)/CaCO(3)) reaction method by making use of a recently available Thermoquest-Finnigan GasBench II preparation device and a Delta Plus XL continuous flow isotope ratio mass spectrometer. Conditions for which the H(3)PO(4)/CaCO(3) reaction produced reproducible and accurate results with minimal error had to be determined. When the acid/carbonate reaction temperature was kept at 26 degrees C and the reaction time was between 24 and 54 h, the precision of the carbon and oxygen isotope ratios for pooled samples from three reference standard materials was 相似文献   

Synthesis of Linear and V-Shaped Carbazolyl-Substituted Pyridine-3,5-dicarbonitriles Exhibiting Efficient Bipolar Charge Transport and E-Type Fluorescence

With the aim of developing all-organic bipolar semiconductors with high charge mobility and efficient E-type fluorescence (so-called TADF) as environmentally friendly light-emitting materials for optoelectronic applications, four noble metals-free dyes with linear and V-shapes were designed using accepting pyridine-3,5-dicarbonitrile and donating carbazole units. By exploiting a donor-acceptor design strategy and using moieties with different donating and accepting abilities, TADF emitters with a wide variety of molecular weights were synthesized to achieve the optimum combination of charge-transporting and fluorescent properties in one TADF molecule. Depending on molecule structures, different TADF emitters capable of emitting in the range from 453 to 550 nm with photoluminescence quantum yields up to 98 % for the solutions in oxygen-free toluene were obtained. All compounds showed bipolar charge-transport. Hole mobility of 2.8×10⁻³ cm²/Vs at 7×10⁵ V cm⁻¹ was observed for the compound containing two di-tert-butyl-substituted carbazole moieties. The compounds were tested in both non-doped and doped organic light-emitting diodes using different hosts. It was shown that the developed TADF emitters are suitable for different color devices with electroluminescence ranging from blue to yellow and with brightness, maximum current and external quantum efficiencies exceeding 10 000 cd m⁻², 15 cd/A, and 7 %, respectively.     

Statistical evaluation of potential damage to the Al(OH)<Subscript>3</Subscript> layer on nTiO<Subscript>2</Subscript> particles in the presence of swimming pool and seawater

Nanosized TiO₂ particles (nTiO₂) are usually coated with an Al(OH)₃ layer when used in sunscreen to shield against the harmful effects of free radicals that are generated when these particles are exposed to UV radiation. Therefore, it is vital to insure the structural stability of these particles in the environment where the protective layer may be damaged and adverse health and environmental effects can occur. This study utilized X-ray analysis (SEM–EDS) to provide a qualitative and semi-quantitative assessment of the chemical and physical characteristics of Al(OH)₃-coated original and damaged nTiO₂ particles (used in sunscreen lotion formulations) in the presence of both swimming pool and seawater. Also, by utilizing statistical tools, a distribution of Al/Ti (%) on the particle surface was determined and evaluated. It was found that 45 min of treatment with swimming pool and seawater significantly induced the redistribution of Al/Ti (%), which changed the surface characteristics of particles and, therefore, may have induced undesired photo-activity and the consequent formation of free radicals.     

Synthesis and properties of hole-transporting indolo[3,2-b]carbazole-based hydrazones with reactive functional groups

The synthesis of indolo[3,2-b]carbazole-based mono- and dihydrazones with reactive vinylbenzyl or vinyloxyethyl functional groups at the nitrogen atom of hydrazine moiety is reported. The thermal, optical, photophysical, electrochemical and photoelectrical properties of the synthesized compounds are described. They exhibit moderate thermal stability with 5% weight loss temperatures ranging from 273 to 343 °C. Self-polymerization of the monomers with vinylbenzyl functional groups starts at around 180 °C. The values of ionization potentials of the compounds measured by cyclic voltammetry are in the range of 4.94–5.00 eV and those estimated by electron photoemission in air range from 4.99 to 5.21 eV. Electron affinities range from −2.28 to −2.23 eV. The molecular structure of these hydrazones allows stable amorphous films to be prepared and the hole drift mobilities of the films exceed 10⁻³ cm²/V s at high electric fields.     

Adsorption of As (V) on iron oxide nanoparticle films studied by in situ ATR-FTIR spectroscopy

Stabilization of arsenic contaminated soils by iron oxides has been proposed as a remediation technique to prevent leaching of arsenate into the environment. Fundamental studies are needed to establish under which conditions the complexes formed are stable. In the present work, a powerful technique, viz. ATR-FTIR spectroscopy, is adapted to the studies of adsorption of arsenate species on iron oxides. This technique facilitates acquisition of both quantitative and qualitative in situ adsorption data.In the present work, about 800 nm thick films of 6-lineferrihydrite were deposited on ZnSe ATR crystals. Arsenate adsorption on the ferrihydrite film was studied at pD values ranging from 4 to 12 and at an arsenate concentration of 0.03 mM in D₂O solution. The amount of adsorbed arsenate decreased with increasing pD as a result of the more negatively charged iron oxide surface at higher pD values. The adsorption and desorption kinetics were also studied. Arsenate showed a higher adsorption rate within the first 70 min and a much lower adsorption rate from 70 to 300 min. The low adsorption rate at longer reaction times was partly due to a low desorption rate of already adsorbed carbonate species adsorbed at the surface. The desorption of carbonate species was evidenced by the appearance of negative absorption bands. The desorption of adsorbed arsenate complexes was examined by flushing with D₂O at pD 4 and 8.5 and it was found that the complexes were very stable at pD 4 suggesting formation of mostly inner-sphere complexes whereas a fraction of the complexes at pD 8.5 were less stable than at pD 4, possibly due to the formation of outer-sphere complexes.In summary, the ATR technique was shown to provide in situ information about the adsorption rate, desorption rate and the speciation of the complexes formed within a single experiment, which is very difficult to obtain using other techniques.